JP INDUSTRIES Pari Chowk, Greater Noida, Uttar Pradesh

A wood bolt—commonly known as a lag bolt or lag screw—is a heavy-duty fastener designed for joining wood to wood or wood to metal/concrete in high-load applications. Here 's how it 's used: 🔩 Primary Uses of Wood Bolts (Lag Bolts): 1. Structural Wood Connections Join beams, posts, and joists in timber framing or deck building. Often used where a strong, load-bearing connection is required. 2. Securing Wood to Other Materials Attach wooden structures (like fences, decks, or framing) to: Concrete or masonry (with anchors) Steel brackets or plates 3. Heavy-Duty Furniture and Fixtures Used in solid wood furniture for secure joints (e.g., bed frames, benches). Often paired with washers to distribute the load. 4. Outdoor and Landscaping Projects Retaining walls, pergolas, garden structures, and playground equipment. Preferred for outdoor use when made of galvanized or stainless steel. 🛠️ How They Work: Wood bolts have thick, coarse threads that grip wood tightly. Typically installed with a wrench (hex or square head). Pilot holes are often drilled to prevent wood splitting. 🧱 Materials & Coatings: Galvanized Steel: For rust resistance outdoors. Stainless Steel: For high corrosion resistance (marine or damp environments). Black Oxide or Zinc Coating: For indoor use or aesthetic purposes. ✅ Advantages: High load capacity. Long-lasting hold in structural wood. Easy to remove or replace.

Country of Origin : Made in India

Specialities : 10000

Usage : Industrial

Material : Mild Steel

Thread Type : Full Thread

Size : ALL

Wing nuts, also known as butterfly nuts, are used to fasten parts together when frequent access is required. They are often used in situations where the fastener needs to be opened and closed regularly.

Material : Mild Steel

Diameter : 20 Mm

Number Of Flower : Fastener

Packaging Type : Bulk

Wheel bolts also have a threaded shaft and a tapered head that matches a vehicle 's wheel insert. However, they go in through the wheel insert, through the brake rotor hat, and straight to the hub, locking everything in place.

Number Of Flower : Fastener

Material : Steel

Packaging Type : Bulk

Size : Standard

The wedge anchor may be used for the fastenings on cracked or cracked-concrete. These can support average and heavy loads or may be used for anchoring: clamp, bond, suspended ceilings, air ducts, handrail, shelves etc.. The stainless steel wedge anchor was invented by J. Joseph Rawlings, in 1910-11.28 Jan 2016

Material : Mild Steel (MS)

Length : 5.0 Inch

Number Of Flower : Wedge Anchor

Construction & Structural Support – Used to attach beams, columns, and heavy structures to concrete foundations. Mechanical & Electrical Installations – Secure machinery, HVAC systems, pipes, and electrical panels. Furniture & Fixtures – Used for mounting shelves, handrails, cabinets, and TV brackets to walls. Automotive & Industrial Applications – Help in securing heavy equipment and automotive parts. Safety & Security – Used in earthquake-resistant construction, railing systems, and crash barriers.

Standard : ISO

Packaging Type : JUTE BAG

Material : Mild Steel (MS)

Length : 8.0 Inch

A U-bolt is an industrial fastener in the shape of the letter U with two threaded arms (or legs) extending from a curved base. U bolts are typically used to support pipework or to attach a part to a pole, beam or wall, where the “u” shape keeps it firmly in place, adding stability to the support.

Country of Origin : Made in India

Usage : Industrial

Certification : ISI

Material Grade : 304 Stainless Steel

Material : Stainless Steel

We are engaged in offering this product to our clients. Our range of all products is widely appreciated by our clients.

Country of Origin : Made in India

Material : MS

Brand Name : JP

Number Of Flower : U Bolts

Diameter : 8 Mm

JP INDUSTRIES, india can provide cold forged hot forged alloy, metal and high strength bolts with complete material compliance. Bolts, stud bolts threaded bars can be offer as both metric imperial inch sizes with coarse, fine, unc, unf, un, bsw, acme threads with continuous thread, full thread, half thread.

Material : Mild Steel

Shape : Hexagonal

Country of Origin : Made in India

Diameter : 100 mm

Hex nuts are six sided general purpose nut with internal screw threads. Hex nuts are one of the most common hexagonal fastener with internal threads that screws on to the shank of a hex head cap screw or other bolts. Hex jam nuts, heavy hex nuts, and lock nuts are just a few types of hex nuts we carry.

Country of Origin : Made in India

Quantity Per Pack : 1000

Shape : Hexagonal

Application : Industrial

Material : Mild Steel

A U-bolt is a U-shaped fastener with threaded ends, commonly used to secure pipes, tubes, or other objects to a surface. It is often used in automotive, construction, and industrial applications to attach components together.The straight vertical sections represent the threaded ends, while the bottom curve secures the object being clamped. The threaded ends are used with nuts to tighten and secure the U-bolt.

Country of Origin : Made in India

Shape : Round

Application : Construction

Diameter : 16 Mm

Introducing our high-quality Tie Rod made from durable Mild Steel. These Tie Rods are expertly crafted in India, ensuring top-notch quality and reliability. With a size of 16, they are perfect for various applications, providing strength and stability where needed.

Material : Mild Steel

Number Of Flower : Tie Rods

Country of Origin : Made in India

A tie rod or tie bar (also known as a hanger rod if vertical) is a slender structural unit used as a tie and (in most applications) capable of carrying tensile loads only. It is any rod or bar-shaped structural member designed to prevent the separation of two parts, as in a vehicle.

Material : Mild Steel

Number Of Flower : Tie Rods

Country of Origin : Made in India

We are engaged in offering this product to our clients. Our range of all products is widely appreciated by our clients.

Surface Finishing : Polished

Application : Construction

Material : Mild Steel

A thread rod (also known as a threaded rod or all-thread rod) is a long, cylindrical rod with continuous threading along its entire length. It is used in various applications where a strong, adjustable, or extended threaded connection is needed.

Packaging Type : 50

Material Grade : 4.6

Finishing : Polished

Material : Mild Steel

We are engaged in offering this product to our clients. Our range of all products is widely appreciated by our clients.

Material : Mild Steel

Shape : Round

Application : For Fitting

Country of Origin : Made in India

1. Structural anchoring: Swedge bolts anchor building frames, columns, and other structural elements to the foundation.2. Tower and pole installation: Swedge bolts secure towers, poles, and masts for telecommunications, electricity transmission, and other industries.3. Bridge construction: Swedge bolts are used to anchor bridge structures, such as bridge piers and abutments.4. Industrial equipment mounting: Swedge bolts secure heavy industrial equipment, like generators, pumps, and compressors, to concrete foundations.5. Seismic anchoring: Swedge bolts provide resistance against seismic forces in earthquake-prone areas.

Material : Mild Steel

Number Of Flower : Fastener

We are engaged in offering this product to our clients. Our range of all products is widely appreciated by our clients.

Shape : Round

Application : For Fitting

Country of Origin : Made in India

Street light poles are very important for road safety. They increase visibility, enhance safety of pedestrians and direct the vehicles on a straight path

Usage/Application : Street

Height : 6 meter

Pole Type : Dual-Arm

Shape : Octagonal

IP Rating : 5

Country of Origin : Made in India

In order to cater the variegated demands of our precious clients, we are offering an excellent quality range of Octagonal Light Pole.

Height : 9 m

Pole Type : Dual-Arm

Usage/Application : Highway

Shape : Octagonal

A straight type foundation bolt is a type of bolt that is used to anchor steel profiles and plates to concrete. It is a long threaded bolt that is straight in shape and is coupled with hex nuts and plate washers to secure the joint

Country of Origin : Made in India

Material : Mild Steel

Number Of Flower : Foundation Bolts

Packaging Type : Bulk

A hex nut is a type of fastener with a hexagonal (six-sided) shape that is used in conjunction with bolts or screws. The nut is designed to be tightened onto the bolt or screw to secure parts together.

Country of Origin : Made in India

Diameter : 25 Mm

Material : Mild Steel

Number Of Flower : Hex Nut

Packaging Type : Metallic

Spring washers are a subtype of washers that are conical in shape to prevent them from resting flush against a surface without the presence of a load. They are designed to provide a spring force and absorb shock by providing an axial load that counters vibrations.

Packaging : Bulk

Hex Bolt Uses Hex bolts (hexagonal head bolts) are one of the most commonly used fasteners in construction, machinery, and industrial applications. They are available in various materials like carbon steel, stainless steel, and alloy steel, and come in different strength grades (4.6, 8.8, 10.9, 12.9). Common Uses of Hex Bolts:1. Construction & Structural Applications ✔ Steel Structures – Used in assembling steel beams and columns. ✔ Bridges & Infrastructure – Helps in load-bearing connections. ✔ Concrete Fastening – Often used with anchors in concrete structures. �� 2. Machinery & Equipment Assembly ✔ Machine Joints – Securely holds mechanical parts together. ✔ Heavy Equipment – Used in tractors, excavators, and industrial machines. 3. Automotive & Aerospace ✔ Engine & Chassis Assembly – Provides strong fastening in high-vibration areas. ✔ Suspension Systems – Supports vehicle frame stability. 4. Electrical & Plumbing Systems ✔ Pipe Flanges & Connections – Fastens plumbing and pipeline components. ✔ Electrical Panels – Used in grounding and structural supports. 5. Furniture & DIY Projects ✔ Woodworking & Metal Frames – Assembles furniture and shelving units. ✔ Home Renovation – Used in deck building and structural repairs.

Material : Stainless Steel

Surface Finishing : Polished

Application : Construction

Shape : Hexagonal

Diameter : 10 Mm

Stainless Steel Dome Nuts are used to conceal some fasteners and sharp threads for protection. The dome nuts have a dome shaped end that is blunt and does not have sharp lines.

Material : Steel

Standard : 304

Country of Origin : Made in India

Diameter : 24 Mm