AAM Automotives Private Limited Udyog Vihar, Gurugram, Haryana

Repair small cracks in Windshields.Save expensive repairs.Reduce incurred insurance costs.Increase customer satisfaction.Increase labour revenue.

» Assymmetric electro-hydraulic.» Lifting Capacity 4.5 ton» Lifting mechanism: Dual hydraulic Cylinder.» Safety: Automatic Lock And automatic Release.» Maintenance free. Permanently lubricated carriage bearing. Clear Base floor design. Arm Design-3 Stage    Column design-Double-S

Washing quality plays a vital role in Customer Satisfaction. In many cases, it is found that, seat,steering and gear knob are found dirty with oil marks because these items came in regular contact ofoil soaked hands and dress of our mechanics. ‘Disposable Covers’ are proved as effective solution for this problem.   Benefits Major benefits of disposable covers are: Reduced Washing complaints by saving seat covers, steering and gear knob from dirt, oil andgrease. Building customer confidence and satisfaction as Service Advisor fits the cover in front of customer. Very much effective in case of accidental repairs where repair process takes higher no of days.

» Lifting Capacity-3.5 Ton» Controlled by Dual Hydraulic Cylinder and automatic leveling function prevents uneven Lifting or lowering    of the load.» Floor or flush mounted. » Adjustable platform extensions to adapt for vehicle length. » Safety: Integrated emergency lowering device in case of Power failure. There is no mechanical connection    between the platform which provide the maximum and perfect freedom of movement underneath the vehicle. 

Two Hose reel with fan and four house reel with centralised fans. Control for automatic start and stop. Nozzle for double exhaust pipe. Fan 1 HP For all types of vehicle workshops, etc. where the hose can hang at a reachable height. The patented spring drive makes the reel very easy to handle. A patented integrated automatic damper saves energy and reduces the noise level Optional retraction control is available for increased safety and efficiency. Mounting of fan on reel is possible. The spring recoiled hose reel can be upgraded to motor drive. Simple and safe installation- Automatic damper for energy savings- Simple adjustment of lifting capacity- Automatic fan on/off switch as option- Retraction control as option The best solution in workshops with a high ceiling, where overhead cranes etc. have to be considered, or where high vehicles must pass. Operated via a hand unit either an IR control or pendant control. A receiving eye on the reel shows the status of operation. Electronic limit switches reduce the risk of malfunction and unnecessary wearing of the hose. Fan start/stop is automatically controlled. Mounting of fan on reel is possible Convenient and safe operation- Automatic fan operation- Settings for limit switches made from floor level- Compact, modern design- Quick & easy installation reduces cost

Extraction-Rail systems, whilst based on standard components, are usually individually engineered to suit client's requirements. An Extraction-Rail system comprises a self-supporting aluminium rail, on which runs a sliding crab or a number of sliding crabs. The crab can be equipped with a length of crushproof hose with/withouthose balancer as required, the crab can also be fitted with a hose reel, arranged for spring recoil or motorised recoil. Motorised sliding crabs with hose reel are also available. Sliding crabs travel on teflon bearings/wheels. Normal mounting height for the rail is approximately 4.0m above ground level. Extraction-Rail systems are available in straight rail or return rail configuration. The aluminium rail acts as a smooth-running track for the sliding crabs, at the same time acting as an exhaust ventilation duct. The sliding crabs are complete with extraction hose and a variety of options are available as illustrated opposite i.e. available with hose balancer, hose reel, either of the spring recoil type or motorised. Also the sliding movement of the crab can be motorised. Extraction-Rail systems allow versatility within the workshop and provide for ease of use. Simply slide the crab along the rail to the point of use, pull down the hose, attach the nozzle to the exhaust pipe - following use hose is automatically elevated keeping the workshop operating area clear.

» Extremely useful in Haildamage.» Fast, Efficient and Economical» Quick Returns» Customer Delight.   Application » Remove primer and finishing coats of paint from the damaged area and clean the sheet metal until bright.» Insert welding studs 2,0 mm into the electrode tip.» Put the outer and the inner electrode with stud onto the prepared spot.» Press welding button for 0,2 - 0,5 seconds The best welding time is achieved when the blue burn mark around the    stud has got a diameter of approx. 5 mm.» Pull on the welding stud using the original head of the tool until the required position is achieved, In some cases,    the use of the sliding hammer will be needed.

Extremely Durable and portable.No Time consuming testing of plastic types.Remove Dent, Warps.Cracks can be repaired in few minutes of Bumper/Bumper holder, Fairings, Mirror Housings etc.

Plasma Cutters for Efficiency & Productivity Now cut heavy steel panels quickly, efficiently and with safety. Plasma is better than gas cutting. The risk of corrosion is reduced to a large extent. Cuts many times faster than gas. Cuts chassis like butter! Features: The all new Plama31FV, with flexible voltage control technology. Can withstand 85 volts to250 volts! Thanks to the PFC-the new Power Factor Control system.

Wallboard: EPS colorful steel skin panel, 50 mm thick, tongue & Groove style, compound construction. anti-flame and heat-insulation, galvanized steel roof panel.2. galvanized steel and square steel pipe assembling, grid & embossed steel plate, 2 embossed steel ramps.

Features: » Specially designed Trolley » Easy movement in the workshop » Improve efficiency » Protect Equipment from damage » Special provision for storing the gun

Lifting Capacity : 2000 lbs(900Kg) Hand Operated ControlsOptional :Centre Jack (Zinc)Deluxe Wheel ClampSide Extension Set

» Capacity 3 t, standard drive-in width 2000 mm, asymmetric swivel arms. » Practical and versatile lifting solution for all types of vehicle for repair and maintenance, indoors and outdoors. » Free access to any part of the vehicle, doors can be opened at any height. » Maximum safety, double load securing with automatic hydraulically and mechanical locks. Automatic locking    swivel arms. » Thoroughly reliable, self-lubrication. Hydraulic drive system protected against moisture, dirt and sand. No    maintenance required.

» Forced Air Cooling» Brand AAM Migatronic Denmark Specification » Current Range DC 20A/14V-250A/21.5V,3 Phase , 400 Volts» Open Circuit voltage 14V DC- 13V DC,Voltage Adjustment Step 10» Consumption Max 7.5 KW,Fuse 10 Amps,3 Phase 50 to 60Hz » Wire Speed 1-15 m per min , Protection IP21, Weight 55 kg , Dimensions 43 x 87 x 79

» 10000Amps of power for factory weld » Fully computer controlled function. Just feed in the thickness of the metal to be welded and the computer will    indicate not only the welding current and time but will also the Air Pressure for accurate and safe welding. An       indicator on the control panel indicates if weld is not proper. » Tip Pressure 450daN, Tips Liquid Cooled, Balancer Arm for Gun & Cable Support

» The modern control technology of the InvertaSpot GT BM automatically identifies the conditions at the joint and   automatically adjusts all necessary parameters. The machine monitors the entire welding process and    performs a secure spot welding. » Due to its transformer inverter technology, the machine consumes 65% less energy as compared to a usual    welding gun machine. » Fully automatic process-regulated multifunction resistance spot welding machine with high frequency inverter    technology and water cooling. For repair of vehicle bodies, in particular of components made from high and    ultrahigh tensiole steels, as well as coated and bonded sheet steels. With a clear quality statement on the    process sequence. Welding results are stored by the machine automatically along with all relevant parameters.    They can be called up at any time for documentation. Important Details: » Automatic material thickness identification » Water cooling for clamp, transformer and electrodes » Documentation of welding parameters an SanDisk memory card as well as the software updated » C-arm recognition system » Conforms to electromagnetic compatibility (EMC) directive 2004/108/EC » Conforms to low voltage directive 2006/95/EC » Conforms to machinery directive 2006/46/EC

» Lifting Capacity 4.5 Tons» Lifting Mechanism: Patented high Pressure Hydraulic System.» Safety: Patented Lock Systems.» Extramely suitable for all mechanical repairs Quick Lube Bays, Express Service and Body shops.» Now get rid of dent on the doors while working. Technicians have ample room around the vehicle to work    on. Install more lifts in the same space thereby increasing the productivity.

Application : Industrial

Material : Stainless Steel

Power : 5.2 kW

» Lifting Capacity: 4 Ton» Single piece column for added strength.» Power unit can be located on either front left or rear right.» Locating hydraulic cylinder and lift mechanism underneath runway eliminates damages to vehicle doors    and permits unobstructed rise. » Easy to operate

» Extraordinary accuracy and easiness to use.» Zeroline: length, width, diagonal and now height too are measured digitally with numerical accuracy.» Zeroline can work with any inclination: by pressing the calibration button you create the zero reference plane    even if the car is not in a horizontal position.» Suitable for measuring body / mechanical parts / wheel alignment etc.

» Basic System» Can work with the existing spot welders equipped with single sided guns» With trolley for future expansion  Application: » Medium Pulling bar, Double Support system, Lever puller,3 Claw puller,» 6 Claw puller, Hand puller, Sliding hammer ,Wavy Wire, Oval Eyelets straight & twisted» Attachment for existing single side welder, Upgrade anytime

» Light weight » Rugged German engineering from Wielander+Schill » 230 Volts, 50 Hz It includes the following: » Twin Side Sliding Hammer, Earth cable included in AP95 Trafo, Wavy Wire Set » Electrode for sliding hammer, Trolley for easy movement, Tips for sliding hammer » Claws for sliding hammer, Carbon Shrinking Rod, Pulling lever with claws

» Lifting Capacity 4.5 ton, Rise: 1876mm, Width Overall: 3493mm» Ceiling Height: 3658mm, 3886mm, 4191mm (Adjustable within this range) » Slider Block Bearings made of Tovar 1000 polyethylene.» Self Lubricating & Maintenance free, Asymmetric electro-hydraulic.» Lifting mechanism: Dual hydraulic Cylinder, Clear Floor Design

» The easiest, quickest and most effective technology that provides the certification before, during and after the    repair.» Continuously measures multiple points automatically during repairs.   On-screen instructions indicate recommended targets and attachments for faster set-up.» Provides color printed reports to document damage and repairs.  Most measuring points are provided with an on screen digital photo of the point for easy location and    reference.