Aro Equipments Pvt. Ltd. Udyog Vihar, Gurugram, Haryana

Compression pressure,cooling system pressure,oil pressure,common rail pressure,fuel pressure (mechanical & electrical) Robust ABS housing ,illuminated LCD display and membrane keypad,measuring range 0....60 bar870 psi,12 V supply voltage,with memory and RS 232 interface.

450mmhandle for hard to reach recessed spark plugs.Avoids burns from engine heat.Universal head gives steady flexibility.The socket with magnet.

Size : 5/8" (16 mm) x 450

Easy-reading 2-12" diameter rubber covered gauge features color-codded quadruple calibrations with 0-300 psi,21 kgcm,21 bar & 2100 kpa.

Electro Hydraulic Four Post Wheel Alignment Lift.Adujtable runway for different tread widths,Hydraulic cylinder located inside fixed platform for maximum safety.Automatic descent locking device in case of cable failure ,Multi-position safety locks in each column.Rolling jacks for wheel free operation,Single point release locking latches.

Number Of Flower : Four  Post

• 3 big door and one emergency door. • High efficient heat exchanger made of 1.5mm thickness stainless steel plate with large air contact surface • Metal base with full grates 50 m thick wall panels • Electrically operated Automatic Damper • 10 sets of upper lights, 4x40wset • 9.5 KW professional blower for air intake • Exhaust Air Fan (optional)

This new system, studied for waterborne paints, uses a special heating system that is operating during the drying phase ( but even during painting phase have to be used for heating the car body especially during cold months) and dry the paint starting form the metal of the body heated directly by the radiant waves. During the drying phase the ventilation is stopped and then in this way the booth do not need any burner or heat exchanger or smoke ducts and the cost for each painting and drying phases are considerably reduced if compared the cost of the gas and the electricity.

Brand Name : ARO

Material To Be Painted : Steel

Power : 5.5 KW

Speciality : AUTOMOTIVE CARS PAINTING

Usage/Application : PAINTBOOTH

Country of Origin : 420V

Phase : 3PH

Air Flow : 15000m3/h

Country of Origin : Made In India

Speed : 0.2-0.3 M/S

Voltage (Volt) : 420V

Outside Dimensions : 7000X5350X3400MM

Inside Diamensions : 6900X3900X2650

SPOTLINER is a complete dent pulling kit, essential for repairing small, medium & big dents. (sill, wheelhouse, car fender etc.) It can be used to:Remove dents without disassembling vehicle fittings, Repair without replacing.

The SPOT 14500 TRAFO is the ideal answer to the welding requirements of high strength steels (UHSS Boron), with a clamping force of 550 daN with 8bar air pressure & welding current that can reach 14500Amps. Its C clamp operate with 16 Amps to 25 Amps fuses only.

SMARTLINER is a complete dent pulling kit, essential for repairing small, medium & big dents. (sill, wheelhouse, car fender etc.) . Remove dents without disassembling vehicle fittings.Repair without replacing.

Suitable for use on coolant additives such as SONAX,G 11,G 12,Superplus 2000(Ford) Approved by vehicle manufacturers as an accurate and safe check on fluids condition.Workshop testet(proven ten thousand times over) for checking the concentration of antifreeze (scale A) in coolant or windscreen washer fluid (scale B) . A light dark diving line on different scale indicates the temperature in degree celcius,down to which the fluid is protected against freezing. The antifreeze scale is subdivided in the battery is indicated in Kg per 1 (scale C).Adjustable eyepiece permits adaptation to the user's eyesight.

Rigid Frame Straightening System with lifting and anchoring.Economical and Space Saving System.Easy to put together system for quick and accurate repair of light and heavy damages. Two seats of 10 Ton Hydraulics to provide two pulls or one push & a pull simultaneously , resulting in quick repairs. Capable of repairing frontal damage without removing engin in some cases.

Large 3-12" diameter gauge with color-coded easy-reading scales.Extra long heavy-duty rubber hose and 14mm 18 mm manifold adaptor.Checks for worn or defective parts in fuel pump,vauun system.

0-2500 RPM free speed.Uses 5" to 8" diameter buffs. Insulated handle reduces cold air transmission to the operator. Common 58" - 11 male spindle. Light weight and compact in size. Rear exhaust, variable speed safety lock lever throttle. Soft grip handle can be positioned for right or left hand operation.

More than 200 products in the range to suit workshop requirements of HCV, LCV, Car and Two wheeler segments, Many Products Have been approved by most of the vehicle manufacturers.

Self Generated Vacuum , Tool Creates its own vacuum, Not for central vacuum or portal vacuum system. Includes 6 ft long vacuum hose & pipe micron filtration reusable filter bag.

The multiscan is an outstanding Diagnostic Tool for mobile technicians and established workshop alike. Often chosen a opposed to continue paying ridiculous amount of memory to keep older equipment up to date,which will never offer the same level of coverage. The Multiscan System features multi system coverage e.g. ABS,SRS,ETS,Climate control,ECM,PCM, immobiliser, Instrument cluster & much more.Also the multiscan Supports extended function such as aviation, resultting of basic setting, adaption vlue rereset, repair guides etc.Print full workshop with the HOST PRO.

Locates source of engine noise quickly.Inspect for problem by tracing sound of flowing water,oil,gas or stream.Handle is shockproof.

Inclosed the 1107 adjustable coupler, R-134 a sight glass manifol with three, 60 color coded hoses with sight glasses.High Pressure 0-500 psi 0-35 kgcm2.

Work on all 12 volt gasoline engines.High impact ABS housing.Detachable heavy duty inductive pick up clamp and leads for easy operation and replacement.

Glow plug tester for 12 volts heater plug with 3 diodes ,connection self test (green). Condition of the glow plug is indicated with diodes,good (green) - defective (red).Test result in 15 seconds.The test may be executed with glow plugs mounted.

Electro hydraulic Lift with 4 cylinders,super low-profile design,Hyudraulic synchronization,Manual emergency lowering,High quality hydraulic and electric components.

Country of Origin : India

Number Of Flower : Hydraulic Lift System

Certification : ISO 9001:2008

Application : Lifting Heavy Load

Country of Origin : 440V, 220V

Condition : New

Automatic Grade : Manual

Power : 6-9kw

Driven Type : Hydraulic

Total Carbohydrate : 1year

Weight Capacity : 3000-4000kg

lifting type : Flat

Brand Name : ARO

After-Sales Service Provided : YES

Item : SCISSOR LIFT

Max. Lifting Height : 1820 Mm