Reliable Spares & Consumables Laxman Vihar, Gurugram, Haryana

ZE102 ESD Wrist Strap Tester ESD Wrist Strap Tester is designed for fast, frequent testing of ESD wrist straps. It is very simple to operate. A green light signals the user that everything is OK.  A red light and an audible indicator mean that the circuit resistance is either too low or too high. ESD Wrist Strap is the first lines of defense against electrostatic charge build up on the human body. They are designed to carry away this charge as soon as it is generated. At the same time the wrist strap or footwear must remain electrically safe for the user. 

Soldering is the process through which two or more objects are joined together by melting a non-ferrous metal, called a filler, into the joint. This is done using a soldering iron. The tip of the soldering iron is made of a copper core plated with iron. It is removable and reusable.

Brand Name : HAKKO

Material : Iron

Shape : Many Shapes

Packaging Type : Metallic

Condition : New

Application : Soldering Station

Length : 25-50 Mm

Feature : Good Quality

Packaging Type : PKT

Number Of Flower : Soldering Bit

Availability : 10 Gm

Frequency : NA

Country of Origin : India

Bit Tip Shape : All Type Shape Available

Automation Grade : Manual

Country of Origin : 220 V

Packaging Type : Box

SMT automatic solder paste mixer can effectively mix tin powder and solder paste evenly, achieving better printing and reflow results, saving manpower and standardizing the operation.

Driven Type : Electric

Condition : New

Power : 60W

Application : Liquid With Suspended Solids

Country of Origin : 220V AC(50HZ)

Number Of Flower : SMT

Stencil Wiping Rolls are used to remove residual solder paste from the bottom side of PC Board stencils. Using Stencil Wiping Rolls prevents smearing, bridging, and solder balls caused by normal printing of solder paste onto PC Boards. Most DEK printers use stencil rolls that are based on the same core tube, which is a plastic tube with a .75" inside diameter (19.5mm), that is 20.87" long (530mm). The typical roll outside diameter is 2.25", and it has 36 linear feet of paper per stencil roll. The full width roll has paper that is 20.12" wide (515mm), but some boards or printers are set up to accommodate a stencil roll with narrower width paper. It is important to make sure that when using a roll with paper that is not the full width that if a solvent bar system is being used, that the paper width is equal to or larger than the width of where the solvent is dispensed from the solvent bar.   Feature: 1.Designed specifically for SMT screen printers 2.Material adaptable for all vacuum and non-vacuum machines 3.High strength, even when wet 4.Exceptionally low lint levels 5.Solvent resistant and highly absorbent

Feature : High Performance

  SMT red glue is certain type of temperature-set adhesive that is used during the SMT process to fix certain components to the board in circumstances where they might lose connection or fall off before solder reflow takes place.

SMT Double sided splicing tape   Double Splice Tape guarantees perfect and reliable joints on all kinds of carrier tape. Double Splice Tape provides precise joining and is available in 8mm 12mm and 16mm widths.

ESD Anti-Static Finger Cots are made of 100% natural Latex in rolled style. Powder Free Finger Cots. A smooth surface makes it ideal for all types of medical and industrial applications. keep moisture and dirt out of cuts or stitches. These Finger Cots are useful to prevent unexpected spotting while working with Printed Circuit Boards and Other Electronic Components.

Material : Latex

Size : Free Size

Packaging Type : Box

Thickness : 4mm

Country of Origin : India

An ESD brush should be used for cleaning, dusting or removing dust particles or solder debris from delicate electronic components such as integrated circuits and printed circuit boards, without generating any static charge. This makes ESD brushes an essential component in a static controlled area.

Material : Polypropylene

Handle Material : Plastic

Application : Laboratory

Pattern : Plain

Number Of Flower : Anti Static Brush

A magnifying lamp is an essential tool for anyone working with precision assembly, inspection or design. Because users can effortlessly view smaller details, lighted magnifying lamps are tremendously helpful in reducing eye strain and preventing vision fatigue. It will be available in 5X, 10X and 20X.

Material : ABS Plastic

Country of Origin : 220V

Number Of Flower : Magnifying Lamps

Peelable solder mask, Solder mask,Chemask, water filtrable solder mask, White Chemask,Chemask peelable  A peelable soldermask is screen printed and used in order to protect selected solder holes against plugging during mass soldering. A peelable soldermask can also protect carbon elements and gold plated contacts during mass soldering.

Application : 8*-28*c

Packaging Type : Cartridge

Packaging Size : 250g

  It is an environmentally friendly and widely used grease for high load application. It is mineral oil based grease containing lithium thickener and several additives. It is superb in load resistance as well as stability in oxidization.

Form : Paste

Application : Industrial

Availability : 80 Grams

Juki Nozzles 501,502,503,504,505,506,507,508 Features & details: Premium Quality Nozzle from Juki. Perfect Suction of SMD Components. No Vaccuum Problem. Easily Replacable, No Tools Required to Replace. No Fitting Issues, Compatible for Maximum SMT Pick and Place Machines.

Material : Mild Steel

Finishing : Polished

Brand Name : Juki

Application : Commercial

HOKI Temperature Controlled Soldering Iron 60W TSI-908H Brand: Hoki Model No.: 908 Input voltage: 230V Temperature: adjustable Wattage: 60W Smart

Input Voltage : 230V

Brand : Hoki

  Floor tape, commonly called industrial floor marking tape, is a special type of tape that is designed specifically to be applied to the floors, primarily in workplaces. This tape has a powerful adhesive that helps to ensure it will stick in place for years, even under harsh working conditions.

Packaging Type : Multicolour

Size : 1inch

Pattern : Plain

Number Of Flower : Floor Marking Tapes

Country of Origin : India

Application : Floor Marking

  The wrist strap and the footwear tester checks these parameters under actual operating conditions with the strap on the wrist or foot wear to the foot. It clearly indicates weather or not the resistance of the wrist strap/foot wear system including the wearer is at least 0.75 Meg ohms and not more than 10/100 Meg ohms respectively.

Application : Watch Use, For Testing Of ESD Wrist Strap And Esd Footwear

Feature : Fine Finishing, Perfect Shape, Shiny Look

Power Source : 9V battery

Surface resistivity meters are essential because they can check whether a surface is insulative, conductive or static-dissipative. They are used to measure surface resistivity and point-to-point resistance.

Usage/Application : Laboratory

It's a device that filters the air indoors to remove fumes and airborne particles produced while soldering metals. This helps maintain better air quality indoors. It removes solder fumes, heat, harmful odors, and other airborne particles that could have adverse effects on health.

Application : Industrial

Feature : Durability, High Strength

Country of Origin : 230 V

Packaging Type : Box

PCB Racks or PCB Holders are best suitable for storage of PCB in any PCB Assembly Line and Handling unit or during transportation. Apart from holding PCBs in an orderly manner, these PCB Holders also provide protection against static electricity.

Material : Plastic

Shape : I Shaped

ESD bins and ESD totes diminish the risk of damage from electrostatic discharge, making it easier to handle, transport and store static-sensitive components and materials. ESD bins are made of polypropylene with conductive material that prevents the buildup of electrostatic charge.

Material : Plastic

Automation Grade : Manual

What are ESD shoes? ESD shoes are also known as electrostatic dissipative shoes. The purpose of this type of footwear is to reduce static discharge and consequently prevent ESD damage in the workplace. ESD shoes are only among the essential equipment that an employee should use when mobility is required.

Outsole Material : PU

Gender : Unisex

Pattern : Plain

Magazine Rack is designed for the manufacture, assembly, storage and transfer of PCB. We keep all the three popular sizes in stock. Both Screw Type and Gear type of Magazines are available in stock.  

Material : Aluminum Alloy Column,PPE,ABS

Anti-static or electrostatic discharge (ESD) gloves protect workers and the environment around them, as they are designed to be used in particle sensitive and low-contaminate environments, such as laboratories, cleanrooms, the biotech industry, and electronic works.

Material : Anti Static

Gender : Unisex

Pattern : Plain

Application : Laboratories

An anti-static wrist strap, also called an electrostatic discharge (ESD) wrist strap, is a safety device worn on your wrist that prevents the buildup of static electricity. ESD straps are primarily used when working with electronic components. When properly worn, the highly conductive threads that make up the strap direct static electricity to a ground where it can be discharged safely. This protects the components from damage and keeps the wearer safe.

Material : PVC

Application : Human Body Static Charge Grounding

Feature : Crocodile Clip And Banana Plug For Grounding

Color : Blue