RIELLO POWER INDIA PVT LTD Mahavirpura, Gurugram, Haryana

The Netman 204 card provides reliable communication between the UPS and its management systems over LAN 10/100 Mb, utilising the main network communication protocols (TCP / IP, HTTP and SNMP), industrial protocols MODBUS / TCP or BACNET / IP and is now available in a convenient wireless option.   HIGHLIGHT NETMAN 204 VERSION WITH DONGLE WI-FI • Wireless Communication • Compatible with all access point  Attention: minimum requirements NetMan 204 Operating System version 15.2 NetMan 204 Firmware version 1.04

Single phase and three phase UPS from 600 VA to 6.4 MVA, for applications ranging from home offices to large industrial plants to data centres.   Power Range: 1000 - 3000 VA   The Sentry KL range is the ideal solution for the protection of PCs and peripheral devices in domestic and office environments. Sentry KL is an easy-to-install and economical solution for protecting: • equipment such as PCs, Media Centres and peripheral devices, TVs, Home Cinemas, Satellite and Digital Terrestrial Receivers, DVD players and writers; • Modems and xDSL routers; • Small household appliances.   Characteristics Online UPS. True double-conversion online UPS. Wide input voltage range (110 - 300 Vac). Output Power Factor 0.8 Generator Compatible. RS-232 port or intelligent slot for remote control. LCD Display.    

Frequency : 47

Riello SuperCaps UPS are designed to provide complete power supply protection for sensitive and mission-critical loads, protecting them from mains disturbances and providing sufficient energy to compensate for interruptions in mains supply. SuperCaps UPS are a type of uninterruptible power supply developed by Riello UPS, which use super capacitors to accumulate energy instead of conventional batteries. Their back-up time is dependent on the load but is sufficient to supply it until the mains power is restored or until the reserve power generator starts automatically. At the heart of the Riello SuperCaps UPS is a sophisticated control system that manages the charge-discharge cycle of the super-capacitors and optimises their lifecycle, which may exceed a million cycles. SuperCaps UPS are ideal for critical installations that are sensitive to short power supply interruptions (they can last from a few cycles up to over a minute). Traditionally UPS rely on batteries for accumulating energy, but at least 87% of power supply interruptions last for less than a second(1), SuperCaps UPS provide greater energy efficiency, lower costs and reduced footprints for systems and data centres.Most UPS are installed as standard with  batteries lasting 5-10 minutes to protect the load against generator start up failure. For modern data centres, electro-medical and industrial applications, the installation of a system with conventional batteries provides insufficient runtime to resolve some of the most common generator startup failure problems: fuel blockage or startup battery failure. Many data centres require between 3-6 hours to transfer operation to a mirroring site or shut-down. Electromedical installations require a secure energy source to ensure life-saving services, and automated manufacturing processes required uninterrupted power to prevent faults in machinery and equipment. For all three critical installation types, an efficient generator set supported by a UPS with a relatively brief autonomy offers the most efficient and effective power continuity solution. SuperCaps are highly ecological and offer a great number of advantages with respect to conventional UPS batteries. SuperCaps UPS do not have batteries and therefore provide savings in terms of battery installation, monitoring, maintenance, replacement and recycling costs. With respect to the 5-7 year lifecycle of standard batteries, SuperCaps UPS have a theoretically infinite lifecycle and provide a lower impact per size/kVA.

A static inverter is virtually the same as a UPS system except they are configured to operate in 'active standby' mode with the bypass supplying the load during normal conditions. When a mains failure occurs contactors are used to transfer to inverter with the standby batteries then supporting the load (typically for 1 hour or 3 hours depending on application). This type of product is generally used in emergency lighting applications, offering efficient backup with reduced running costs, although provides no filtering or protection for more sensitive loads such as computer equipment. All our UPS modules can be configured to operate as a static inverters, however please note this is a factory fitted option.

Master Switch Single-phase (MMS ) is part of the Master Switch range and offers solutions suitable for protecting single-phase loads with different power ratings. MM S is available in three sizes - 32, 63 and 120 A - and is therefore able to satisfy various requirements for the protection of singlephase loads.

When generators are installed, it is common to use four pole changeover switchgear or contactors when transferring from mains to generator, resulting in the traditional neutral-earth reference being lost during transition. This can cause the phase voltages to rise alarmingly and any sensitive single phase loads could be damaged. By adding a bypass isolation transformer it allows the electrical contractor to earth the UPS output neutral, thereby eliminating this problem. Single phase bypass transformers are also installed on small systems where the client requires the UPS output neutral to be earthed.

Power Range: 6 - 20 kVA Current Range: 26 A 1-3:1 1:1 Absolute protection SPH series is the ideal solution for protecting IT systems, Telecommunications equipment and mission-critical systems such as safety devices, ensuring maximum power reliability. SPH Series is designed and built using state-of-the-art technology and Components to provide maximum protection to the powered loads with no impact on downstream systems and optimized energy savings.

Application : Industrial

Feature : Durable, Quality Assured

Power Range: 20 - 160 kVA 1-3:3 1-3:1 HIGHLIGHTS High adaptability to input voltage Compatible with industrial environments Modular Plug & Play solution Suitable for stand alone and modular installations Complete flexibility Graphic touch screen display The Sentryum Rack range was specially developed to ensure power continuity in all sectors deemed critical due to the specific environmental conditions or industrial processes requiring protection. It is a true ON LINE double-conversion UPS, available in a 20 kVA/kW standalone version and in modular versions from 20 to 160 kVA/kW. The Sentryum Rack is available in both single-phase and three-phase output configurations. It accepts both single-phase and three-phase inputs with no need for special setups or operator intervention.  The voltage arrangement could change during operation without any reset or manual operation, therefore the UPS auto-detects the input voltage and behave accordingly.

Number Of Flower : Online UPS

Shape : Square

Certification : European directives: L V 2014/35/EU low voltage; EMC 2014/30/EU electromagnetic compatibility

Condition : New

Bowl Rack Product : Industrial Use

Size : 397(9U) x 445(19”) x 664 (for the single module) mm

Brand Name : Riello UPS

Packaging Type : RAL 9005

HIGHLIGHTS Flexible choice of 3 cabinet sizes (Compact, Active, Xtend)  Operating efficiency up to 96.6% (ON LINE mode)  Delivers unity power factor (kVA = kW)  High overload and short circuit capacity  Large colour touchscreen display and LED status indicator   Our third generation of transformerless ON LINE UPS systems, the 10-40 kVA Sentryum rewrites the concept of flexible power by offering a choice of three compact cabinet sizes to suit the needs of any small data centre or mission-critical application.   Enhanced overload and short circuit capacity guarantee maximum availability. Incorporating a 5-inch colour touchscreen display and an intuitive LED status indicator that automatically changes colour based on the UPS’s current operating state.

Number Of Flower : Ups

Application : Industrial Use

Feature : Superior Finish

Condition : New

Automatic Grade : Automatic

Country of Origin : Italy

Brand Name : Riello UPS

Power Range: 250 - 800 kVA 3:3 HIGHLIGHTS High efficiency up to 97% in double conversion  kW = kVA (pf 1) up to 40°C Transformer-free UPS Peak shaving Active Filter Mode (ACTIVE ECO) Colour LCD Touch Screen Full front access, back-to-back install NextEnergy is the latest UPS series designed for mission critical applications. The three-phase UPS offers transformer-free double conversion technology VFI SS 111, with integrated the latest IGBT three-level design.NextEnergy is designed to meet the power requirements of tomorrow, offering the highest efficiency in the market and low running cost. Thanks to the Efficiency Control System (ECS) NextEnergy also guarantees the highest levels of efficiency even at partial loads.Its unity power factor and easy system upgrading make it the ideal solution for the business continuity of any IT application.

Number Of Flower : Online UPS

Application : Industrial Use

Feature : Easy To Clean

Condition : New

Brand Name : Riello UPS

Frequency : 40 - 70 Hz

Power Range: 60 - 200 kVA 3:3 Exceptional performance and efficiency. Multi Sentry is a state-of-the-art uninterruptible power supply, achieving the highest possible level of on-line double-conversion performance (VFI-SS-111) as defined within IEC EN 62040-3.The UPS has been designed to protect critical information and telecommunications systems, networks, services and processes whose operation could be disrupted by poor power quality and/or breaks in their mains power supply.The sizes available include: 60-80-100-120-160-200 kVA all with a three-phase input and output.The Multi Sentry UPS is one of the most efficient UPS available with a minimal impact on its environment and power sources.

Size : 1600x500x830 Mm

Application : Office, Industrial

Feature : High Utility

Condition : New

Appearance : Modern

Brand Name : Riello UPS

After-Sales Service Provided : Yes

Power Range: 45 - 294 kVA 3:3 15-240 kW + redundancy25-400 kW + redundancy42-1008 kW + redundancy Highlights Utmost availability Ultimate scalability Unmatched power density Efficiency > 96.5% Multiple controls Highly flexible Advanced communication Riello UPS MULTI POWER (MPW and MPX) is a three-phase uninterruptible power supply with a modular architecture, ON LINE Double Conversion type, with the possibility of redundant. It delivers a rated power from 15 to 1176 kW and it is manufactured using specially-designed components and transformerless technologies that deliver exceptional efficiency up to 96.5%, and high power density in a compact footprint. Modularity reduces the risk of wasteful oversizing at installation, while offering “pay as you grow” scalability when it’s time to expand, optimising initial investment and total cost of ownership (TCO). It is designed to protect: any critical high-density computer and IT environment data centers critical loads

Packaging Type : RAL 9005

Power Range: 10 - 200 kVA 3:3 3:1 Total protection 3:1 10-120 kVA3:3 10-200 kVA Master MPS series UPS devices ensure maximum protection and power quality for any type of load, especially for mission critical applications, data centres, security systems and electro-medical equipment, industrial processes and telecommunications.Master Plus is an ON LINE double conversion UPS (class VFI SS 111 in accordance with IEC EN 62040-3) with a transformer isolated inverter.

Application : Indusrtial Use

Classification : European Directives: L V 2014/35/EU Low Voltage; EMC 2014/30/EU Electromagnetic Compatibility

Condition : New

Power Range: 65 - 500 kVA 3:3 Uninterrupted Quality Power For Mission Critical Applications. HIGHLIGHTS High efficiency IGBT-based rectifier technology Compact, reliable and robust Galvanic isolation High overload capacity The enhanced levels of quality, reliability and energy savings offered by the Master HP range of UPS have been extended to include a 480 Vac - 60 Hz version, certified as UL/CSA, with power ratings from 65 kVA to 500 kVA, in single module or parallel configuration. IT managers, facility managers, and CTOs are under increasing pressure to reduce downtime and assure that their critical loads are supplied with uninterrupted and high quality power.With this increasingly stringent requirement, Riello UPS has invested in power solutions that meet strict demands; a commitment resulting in the launch of the Master HP UL range.More than just an innovative and technologically-advanced UPS, it is a leap into the future of three-phase technology. With its double conversion on-line technology based entirely on IGBT and digital signal processors (DSP), the Master HP UL range ensures maximum critical load protection, with VFI SS 111 classification (Voltage and Frequency Independent) in accordance with IEC EN 62040-3. This range is designed using a new configuration that includes an IGBT sinusoidal input rectifier. Unique in its design, double conversion technology with galvanic isolated output guarantees a quality power supply that is completely protected from all electrical anomalies at the input.

Application : Indusrtial Use

Condition : New

Power Range: 100 - 600 kVA 3:3 Maximum protection and performance The Master HP series from 100 to 600 kVA is the Riello UPS solution for installations requiring high energy efficiency and maximum power availability. Master HP Series provides maximum protection and power quality for data centres and industrial loads. The UPS has an IGBT-based rectifier, DSP (Digital Signal Processor) technology and provides true-line, double conversion power protection, (VFI SS 11 - Voltage and Frequency Independent in accordance with IEC EN 62040-3).

Application : Indusrtial Use

Condition : New

Country of Origin : 380 / 400 / 415 V three-phase

Frequency : 45 - 65 Hz

Power Range: 100 - 800 kVA 3:3 Highlights High efficiency up to 95.5% in double conversion  kW = kVA (pf 1) up to 40°C Galvanic Isolation Peak shaving The Master HE series from 100 to 800 kVA are the Riello UPS solution for installations requiring high energy efficiency and maximum power availability. Master HE Series provides maximum protection and power quality for data centres and industrial loads. The UPS has an IGBT-based rectifier, DSP (Digital Signal Processor) technology and provides true-line, double conversion power protection, (VFI SS 11 - Voltage and Frequency Independent in accordance with IEC EN 62040-3).

Application : Indusrtial Use

Condition : New

Country of Origin : 380 / 400 / 415 V 3-phase

Frequency : 45 - 65 Hz

Power Range: 15 KVA – 1500 KVA  3:3 The Riello HPM is the ultimate modular UPS for DATA CENTRES and other CRITICAL LOADs.The HPM is designed to protect any critical high-density computer and IT environment, whilst achieving maximum availability. The HPM grows along with the demands of the business without oversizing the UPS - optimizing both the initial investment and the Total Cost of Ownership. As soon as demand increases, the Riello HPM modular solution can expand its power capability, maintaining the highest levels of power protection, availability, redundancy and investment savings. Digital technology has an increasingly strong influence on day-to-day activities in almost all sectors and applications such as healthcare, power generation, social networking, telecommunications, commerce and education.Subsequently, any activities and equipment related to data storage, processing and transfer should be supplied from the most reliable power source. HPM ensures that a scalable, secure, high quality power supply is available for a variety of critical load applications. The new HPM Power Modules feature the very latest in UPS technology. With its three level Neutral Point Clamped (NPC) inverter and Power Factor Corrected (PFC) input control, the HPM ensures the highest level of performance in terms of overall efficiency, input power factor and harmonic impact on the supply source.

Number Of Flower : Online UPS

Application : Industrial Use

Condition : New

Brand Name : Riello UPS

PowerShield³ provides efficient, user-friendly UPS management using bar chart displays to show major operational information such as the input voltage, UPS load % and batteries charge %. The software also provides detailed information on fault conditions and UPS operating characteristics. PowerShield³ has been developed with a client/server architecture that makes it flexible and easy to use, and provides multi-lingual and on-line support.   • Sequential and priority-based shutdown: PowerShield³ provides unattended shutdown of single and networked PCs, saving any active work and the most widely used applications Windows. Users can define their own shutdown procedures and establish the order in which critical computers (such as servers) are to be powered down • Multi-platform compatibility: PowerShield³ uses the TCP/IP communications protocol to achieve standardised management and monitoring across the widest possible range of platforms. This makes it possible to monitor computers with different operating systems from a single console, for example monitoring a UNIX server from a PC with Windows and also connecting to UPS located in different geographical areas using dedicated networks (intranets) or the Internet • Event scheduling: PowerShield³ users can program their own shutdown procedures, detailing power-off and power-up scenarios to increase system safety and, equally important, power economy • Messages management: PowerShield³ keeps users constantly informed about the status of their local and network UPS, and environmental sensors. A list can be defined of users who should receive e-mail messages, faxes and SMS when faults or sudden mains power supply failures occur • Integrated SNMP agent: PowerShield³ features an integrated SNMP agent for UPS management which can send all the information required and generate traps using the RFC 1628 MIB standard and environmental sensors. This PowerShield³ can be downloaded free of charge from www.riello-ups.com All the trademarks indicated are the property of their respective owners. Communication Software feature makes it possilbe to manage the UPS in compatible SNMP management stations such as HP Open View, Novell Managewise and IBM NetView • Wap server integrated: PowerShield³ allows the user to monitor a UPS through WAP mobile phone • Security, easy to use and connect, communication is password protected to ensure UPS system security. Using the new discovery/browsing function, all the RIELLO UPS connected to a protected computer or LAN can be displayed in a list format. In the absence of a LAN connection, support is provided for modembased communication.

Riello UPS, Europe’s leading manufacturer of uninterruptible power supplies (UPS), has launched its new containerised solution, PowerBox.

PowerNETGuard software centralises UPS management using network interface (SNMP) communications. It is ideal for Data Centre managers and medium to large sized networks. PowerNETGuard uses the RFC1628 standard Management Information Base (MIB) and ensures standardised UPS management wherever they are located.     Centralised control of remote UPS via Ethernet with SNMP protocol Multi-level display of geographical areas, building plans, maps, etc. Multi-user access with various security levels Compatible with NetMan and RFC 1628 standard SNMP agents Creation of graphs of input and output values and data back-up to file Alarm notifications via e-mail and SMS Integrated Wap Server for alarm display For Windows operating systems (2008 Server, Vista, 2003 and XP), Linux, Solaris 8, 9 and 10.

Riello UPS, Europe’s leading manufacturer of uninterruptible power supplies (UPS), has launched its new containerised solution, PowerBox. Each PowerBox contains all of the necessary switchgear and distribution panels to deliver uninterruptible power from a combination power solution. This can include: a Riello UPS, Flywheel energy storage system, battery packs and suitably rated generator.   The Riello PowerBox provides critical systems with a site specific power solution. It can be easily deployed and installed wherever and whenever needed, with minimal impact on existing plant room and facilities. Each PowerBox contains all of the necessary switchgear and distribution panels to deliver uninterruptible power from a combination power solution. This can include: a Riello UPS, Flywheel energy storage system, battery packs and suitably rated generator. PowerBox provides a robust, highly resilient power solution with zero downtime and is easily installed with components within a "stand-alone" 20-foot or 40-foot container. One of the main reasons the PowerBox solution was created was so that you no longer need dedicated space in your data centre facility or plant room for UPS. This allows for more of the building to be used for critical IT infrastructure. This is especially useful on brownfield sites where space may be limited. Also, containerised power solutions meet Riello’s stringent requirements for eco-friendly power protection systems as their high operating efficiency saves energy and reduces operating costs. Containerised power solutions are available for short-term hire to allow clients to perform their own onsite tests prior to purchase or provide clean, resilient power for a specific event or project.* The Riello UPS PowerBox is a highly efficient and resilient power solution for: Modular data centres requiring a scalable power system City data centre sites requiring additional power Public events requiring reliable additional short-term power, such as the Olympics Military and remote communications installations.    

The NetMan 204 network agent allows UPS directly connected over LAN 10/100 Mb connections to be managed using the main network communication protocols (TCP /IP , HTTP HTTPS, SSH, SNMPv1, SNMPv2 and SNMPv3). It is the ideal solution for the integration of UPS over Ethernet networks with Modbus/TCP and BACnet/IP protocols. It was developed to integrate UPS into medium-sized and large networks, to provide a high level of reliability in communication between the UPS and associated management systems.   32bit RISC processor Compatible with 10/100 Mbps Ethernet and IP v4/6 networks Compatible with PowerShield³ and TeleNetGuard SNMP v1, v2 and v3 with RFC1628 for PowerNetGuard and NMS connection SNMP v1 with RFC3433 for the management of environmental sensors HTTP and HTTPS for UPS control via web browser SMTP for alarm notifications and UPS status updates via email Modbus/TCP BACnet/IP Maximum expandability WiFi ready, using a customized dongle can communicate via WiFi network Events log and data management Wake-on-LAN management for starting computers via TCP /IP network Other standards: DHCP, DNS, FTP, NTP , ICMP , IGMP Management of environmental sensors Configurable via SSH sessions and HTTP Firmware upgradeable via FTP and HTTP.

The MultiCOM 301/302 protocol converter may be used to monitor the UPS using the MODBUS/JBUS protocol on RS485 or RS232 serial line. It will also manage a second, independent RS232 serial line that can be used to connect other devices such as the Netman 101 or a PC that uses the PowerShield³ software.   Port configuration for MODBUS/JBUS as RS232 or RS485 Management of two independent serial lines Suitable for integration with the main BMS management programs.

The CSS (Central Supply System) range by Riello UPS is designed in compliance with standard EN 50171 and is therefore the ideal solution for installation in buildings subject to fire safety regulations and in particular for the power supply of emergency lighting systems. This is not all however, the CSS range by Riello UPS is also suitable for supplying power to other emergency systems such as automatic fire extinguishing systems, alarm systems and emergency detection systems, smoke extraction equipment and carbon monoxide detection devices as well as dedicated security systems in sensitive areas. The use of centralised supply systems (CSS) ensures a significant reduction in system set-up and maintenance costs as well as making periodical checks simpler and faster to perform.