Temperature Range: -46oC to +116oC (-50` F to 240` F)
Temperature below: -60 F at lower pressure
Safe working pressure: 365 psig (25 bar)
Weld–IN- Line Stop Valves well designed and constructed low pressure drop refrigerant shut-off valve are butt – welded directly to steel piping, there by eliminating potential leaky flanges or threaded joints and simplifying installations. Available in both wheel and vented cap option
Weld–IN- Line Stop Valves well designed and constructed low pressure drop refrigerant shut-off valve are butt – welded directly to steel piping, there by eliminating potential leaky flanges or threaded joints and simplifying installations. Available in both wheel and vented cap option
Vertical Accumulators are made from Carbon Steellow temp. plate shell and carbon steellow temp. steel dished ends. Shells upto 300mm (12") are made from seamlesswelded pipes and above 300 mm, they are made from rolled plates.
Vertical Accumulators are made from Carbon Steellow temp. plate shell and carbon steellow temp. steel dished ends. Shells upto 300mm (12") are made from seamlesswelded pipes and above 300 mm, they are made from rolled plates.
Strainers Valve are seam welded, and the ends reinforced or capped with seal rings. This construction reduces the possibility of bursting the screen assembly. The end of the screen assembly seats against the flange plate to form a tight seal, thereby preventing dirt from bypassing the strainer screen.
Strainers Valve are seam welded, and the ends reinforced or capped with seal rings. This construction reduces the possibility of bursting the screen assembly. The end of the screen assembly seats against the flange plate to form a tight seal, thereby preventing dirt from bypassing the strainer screen.
Refrigerants: R-717 (Ammonia), R-12, R-22 & other common refrigerants.
Temperature Range: -46oC to +116oC (-50` F to 240` F)
Safe working pressure: 365 psig (25 bar)
Stop valves make them far superior product especially in regard to non leakage of seat, bonnets and back seating. All valves are available in Straight and Angle form.
Stop valves make them far superior product especially in regard to non leakage of seat, bonnets and back seating. All valves are available in Straight and Angle form.
Temperature Range: -46oC to +116oC (-50` F to 240` F)
Safe working pressure: 365 psig (25 bar)
Temperature below: -60 F at lower pressure
Stop Cum Check Valves are butt-weldable directly to steel piping, thereby eliminating potential leaky flanges or treaded joints, and simplifying installation. The important features of these valves are non leak packing and back seat design. In valve open condition, if inlet pressure drops below outlet pressure, the valve acts as check valve and do not allow reverse flow of liquid.
Stop Cum Check Valves are butt-weldable directly to steel piping, thereby eliminating potential leaky flanges or treaded joints, and simplifying installation. The important features of these valves are non leak packing and back seat design. In valve open condition, if inlet pressure drops below outlet pressure, the valve acts as check valve and do not allow reverse flow of liquid.
Temperature of medium: -40oC to +80oC with 18 Watt coil
Safe Working Pressure: 300 psig (21 bar)
Solenoid valves may be applied on a wide variety of applications. These flanged, industrial refrigeration duty solenoid valves are very simple and compact but rugged in construction, These are direct acting or pilot operated solenoid valves for liquid suction and hot gas lines with ammonia or fluorinated refrigerant. SUPERFREEZE Solenoid valve type SFA5 is the direct operating type & type SFA 17, SFA 32, SFA 42, SFA 50 are higher capacity pilot operated solenoid valves for refrigeration controls & air conditioning applications.
Solenoid valves may be applied on a wide variety of applications. These flanged, industrial refrigeration duty solenoid valves are very simple and compact but rugged in construction, These are direct acting or pilot operated solenoid valves for liquid suction and hot gas lines with ammonia or fluorinated refrigerant. SUPERFREEZE Solenoid valve type SFA5 is the direct operating type & type SFA 17, SFA 32, SFA 42, SFA 50 are higher capacity pilot operated solenoid valves for refrigeration controls & air conditioning applications.
Temperature range: -46oC to + 116oC (-50 F to + 240 F).
Seat disc: PTFE Teflon
Safe Working Pressure: 365 psig (25 bar)
Self Closing Oil Drain Valves are used for draining oil from systems containing refrigerant under pressure. The main feature of this valve is that on release of the handle the valve closes immediately, thus protecting the user and unnecessary refrigerant leaks.
Self Closing Oil Drain Valves are used for draining oil from systems containing refrigerant under pressure. The main feature of this valve is that on release of the handle the valve closes immediately, thus protecting the user and unnecessary refrigerant leaks.
Srv-1 series safety relief valves are designed to provide emergency relief from excessive pressure in refrigerant congaing vessels. Most prefered by users of refrigeration plants and equipments.
Srv-1 series safety relief valves are designed to provide emergency relief from excessive pressure in refrigerant congaing vessels. Most prefered by users of refrigeration plants and equipments.
We are offering refrigeration valves.
Superfreeze state of the art shut off valves are designed specifically for use in industrial ammonia and large halocarbon refrigeration systems.
We are offering refrigeration valves.
Superfreeze state of the art shut off valves are designed specifically for use in industrial ammonia and large halocarbon refrigeration systems.
We are offering refrigeration solanoid valves.
The primary function of superfreeze electronically operated solanoid valve is to control automatically the flow of fluids or gases in a refrigeration plant.
We are offering refrigeration solanoid valves.
The primary function of superfreeze electronically operated solanoid valve is to control automatically the flow of fluids or gases in a refrigeration plant.
The Group started with a humble origin has now grown into the present "Super" Group with SUPERFREEZE INDIA LIMITED as a flag ship company with well equipped manufacturing unit in an area of 8 acres of land with a completely modernised foundry, C.N.C. Machines equipped Machine shop and the most modern Research and Development Center for wide range of Industrial Refrigeration Equipments.
The Group started with a humble origin has now grown into the present "Super" Group with SUPERFREEZE INDIA LIMITED as a flag ship company with well equipped manufacturing unit in an area of 8 acres of land with a completely modernised foundry, C.N.C. Machines equipped Machine shop and the most modern Research and Development Center for wide range of Industrial Refrigeration Equipments.
Ice Bank Coils are evaporator coils made of pipes and dipped in a tank containing water. Ice is made and stored on the coil and used as and when required. The ice can be made at non-peak hours and can be utilized as and when required.
Ice Bank Coils are evaporator coils made of pipes and dipped in a tank containing water. Ice is made and stored on the coil and used as and when required. The ice can be made at non-peak hours and can be utilized as and when required.
Reflex Glass Liquid Level is designed for safe & positive visual indication of liquid level in vessels under high pressure & temperature conditions. The liquid chamber is one piece metal body covered by glass. The light striking the glass in the liquid portion is absorbed by the liquid where as the light striking the glass in the vapor portion is reflected making the liquid appear as black. Large chamber for boiling, flashing or surging liquids.
Reflex Glass Liquid Level is designed for safe & positive visual indication of liquid level in vessels under high pressure & temperature conditions. The liquid chamber is one piece metal body covered by glass. The light striking the glass in the liquid portion is absorbed by the liquid where as the light striking the glass in the vapor portion is reflected making the liquid appear as black. Large chamber for boiling, flashing or surging liquids.
Recirculation System With Ammonia Pump No need to adjust Expansion Valves, Adoptable to all types of Refrigeration Plants, Protects Compressor by Preventing.
Recirculation System With Ammonia Pump No need to adjust Expansion Valves, Adoptable to all types of Refrigeration Plants, Protects Compressor by Preventing.
Refrigerants: R-717 (Ammonia), R-12, R-22, R-502 etc.
Pressure and Temprature Regulators are specially designed for capacity regulation in refrigeration, freezing and air conditioning plant for ammonia and fluorinated refrigeration. SAR is a pilot operated main valve with screwed-in pilot valve or valves mounted in an external pilot line. External control pressure with electric on-off regulation complain with evaporate pressure regulation
Pressure and Temprature Regulators are specially designed for capacity regulation in refrigeration, freezing and air conditioning plant for ammonia and fluorinated refrigeration. SAR is a pilot operated main valve with screwed-in pilot valve or valves mounted in an external pilot line. External control pressure with electric on-off regulation complain with evaporate pressure regulation
Power Saver Refrigeration Compressors high to low temperature in general applications such as cold storage, quick freezing, ice-making and air-conditioning. Additionally, they are particularly suitable for special applications in breweries, steel works, and chemical and research establishments.The liners are of high tensile cast iron with a fine ground external and honed internal finish.The pistons are made of an aluminium alloy. They are fitted with 3 compression and 2 oil scraper rings to provide efficient gas sealing and good oil control.
Power Saver Refrigeration Compressors high to low temperature in general applications such as cold storage, quick freezing, ice-making and air-conditioning. Additionally, they are particularly suitable for special applications in breweries, steel works, and chemical and research establishments.The liners are of high tensile cast iron with a fine ground external and honed internal finish.The pistons are made of an aluminium alloy. They are fitted with 3 compression and 2 oil scraper rings to provide efficient gas sealing and good oil control.
Oil Separators are made from Carbon Steel shell and carbon steel dished ends. Shells upto 300 mm (12") are made from seamleslswelded pipes and above 300 mm. they are made from rolled plates. All oil separators are manufactured and tested as per the following standards.
Oil Separators are made from Carbon Steel shell and carbon steel dished ends. Shells upto 300 mm (12") are made from seamleslswelded pipes and above 300 mm. they are made from rolled plates. All oil separators are manufactured and tested as per the following standards.
Monoblock Vertical Agitators are made from Carbon Steellow temp. plate shell and carbon steellow temp. steel dished ends. Shells upto 300mm (12") are made from seamlesswelded pipes and above 300 mm, they are made from rolled plates. They are simple and rugged in construction, double taper roller bearings at one end reduces noise and given long life to the agitator.
Monoblock Vertical Agitators are made from Carbon Steellow temp. plate shell and carbon steellow temp. steel dished ends. Shells upto 300mm (12") are made from seamlesswelded pipes and above 300 mm, they are made from rolled plates. They are simple and rugged in construction, double taper roller bearings at one end reduces noise and given long life to the agitator.
Level Port is a simple device to see actual levels in refrigeration system. It has reflex glass. When liquid is present behind glass, it appears dark. When vapor is present, it is light. The neck is provided long for ease of welding and insulation clearance for low temperature service. To see level clearly in frosting condition, Frost shield may be provided.
Level Port is a simple device to see actual levels in refrigeration system. It has reflex glass. When liquid is present behind glass, it appears dark. When vapor is present, it is light. The neck is provided long for ease of welding and insulation clearance for low temperature service. To see level clearly in frosting condition, Frost shield may be provided.
Inline Check Valves are ideally suitable for refrigerant flow control applications. Valves open wide for flow in the arrow direction on the valve body. Valves close quickly and reliable when flow reversal occur. Plated bodies, stainless steel disc and spring enable them to withstand expected industrial refrigeration conditions. Furthermore, these valves can be mounted in any position.
Inline Check Valves are ideally suitable for refrigerant flow control applications. Valves open wide for flow in the arrow direction on the valve body. Valves close quickly and reliable when flow reversal occur. Plated bodies, stainless steel disc and spring enable them to withstand expected industrial refrigeration conditions. Furthermore, these valves can be mounted in any position.
Port Size¼” thru 1” (6mm – 25mm) for globe and angle form, screwed end.
Hand Expansion Valves These slotted seat nut are more tolerant to dirt particle than tapered plug expansion. Hand wheels are of red color to distinguish them from shut-off valves.High pressure or intermediate pressure liquid feed to accumulators, intercoolers or recirculators.
Hand Expansion Valves These slotted seat nut are more tolerant to dirt particle than tapered plug expansion. Hand wheels are of red color to distinguish them from shut-off valves.High pressure or intermediate pressure liquid feed to accumulators, intercoolers or recirculators.
Reviews & Ratings
Write a Review
Post Free Ad