Post Free Ad Sign Up

Diffused Aeration System Dealers

(86 products available)
  • Premium
    Fine Bubble Diffuser +2

    Fine Bubble Diffuser

    480 - 2,000 / pcs
    • Brand NameNeeravi Aqua And Fire Solutions,Neeravi Aqua And Fire Solutions
    • MaterialStainless Steel
    • FinishingPolished
    • Shapetubular
    • Applicationwaste water treatment
    • Warranty2 years
    •  Neeravi Aqua and Fire Solution’s fine bubble diffusers are typically available in disc, tube, or plate shapes, each designed to maximize aeration efficiency. The diffusers feature a perforated membrane, usually made of high-quality EPDM, silicone, or polyurethane, which allows the release of fine bubbles.  Fine bubble diffusers are designed to release very small air bubbles, significantly increasing the surface area for oxygen transfer. This leads to higher oxygen dissolution rates in the water, making these diffusers ideal for biological treatment processes in wastewater management.
    ...more
    www

    Neeravi Aqua And Fire Solutions

    South Extension, Delhi
    GST 9 yrs 4.5 (8)
  • Premium
    Fine Bubble Tube Diffuser

    Fine Bubble Tube Diffuser

    750 / Piece
    • Brand NameAirson – AD
    • Raw materialImported
    • ImportedTube Type
    • Type of BubbleFine bubble
    • MOC of MembraneEPDM / EPDM+ /EPDM++ / silicon / silicon+ / PU
    • MOC of Membrane SupportPVC PIPE
    • MOC of Membrane ClipsSS
    • MOC of Diffuser Male AdapterABS
    • Operating Temperature of Membrane85 deg. Celsius
    • Nipple attached to diffuser¾”x3”
    • Dimensions of Bubble>1mm
    • Air put through rate4 to 6m3/hr
    • Designed under the guidance of expert professionals, the Fine Bubble Tube Diffuser offered by the company is acknowledged by its sophisticated design. Owing to its reliable diffusion technique, this Fine Bubble Tube Diffuser remits excellent performance. This Fine Bubble Tube Diffuser is highly cost-effective in nature. Appreciated For : Abrasion resistant Corrosion resistant Temperature resistant Mechanical strength Easy Installation Demanded For : Oxygenation for pharmaceuticals Water and waste water diffusion Aquaculture diffusion Gas diffusion   Note: Install within 30 days otherwise store in a cool place . Remove from box,keep away from direct sunlight. If plant operation in stop & start,before starting the plant clean the diffusers to prevent damage. Proper maintenance of diffuser will increase the longer life of upto 5 - 7years.
    ...more
    www

    Bajrang Enviro Engineers

    Balanagar, Hyderabad
    GST 16 yrs 4.6 (30)
  • Premium
    Aerator Diffuser

    Aerator Diffuser

    Get Price Quote
    • MOQ100 Piece
    • MaterialPlastic
    • FinishingPolished
    • ShapeRound
    • ApplicationIndustrial
    • SizeStandard
    • Country of OriginIndia
    • Gained by the years of industry experience, we offer to our valued patrons a wide range of Aerator Diffuser. These premium quality products are manufactured using high-grade raw material, which is obtained from the most authentic and leading vendor in the market. The Aerator Diffuser, we offer is easy to Install and is easily available in the market. We also ensure that the product is delivered to our clients as per the time frames set by them.Features : Anti corrosive High durability Excellent performance Affordable price
    ...more
    www

    Energy Equipment

    Sriperumbudur, Chennai
    GST 4 yrs 4.0 (1)
  • Premium
    Aerator Diffuser

    Aerator Diffuser

    Get Price Quote
    • MOQ5 Piece
    • ApplicationAeration
    • Country of OriginIndia
    • MaterialPlastic & Rubber
    • ColorBlack
    • ShapeRound
    • SizeStandard
    ...more
    www

    Crest Infratech

    Sahastradhara Road, Dehradun
    GST 3 yrs 5.0 (1)
  • Premium
    Tube Diffuser (ATI-TD-63-610)

    Tube Diffuser (ATI-TD-63-610)

    Get Price Quote
    • MaterialSilicon/epdm
    • Diameter63 Mm
    • Length610 Mm/1000 Mm
    • Type of BubbleFine
    • Size of Bubbles1.0 to 2.0 Mm
    • Air Flow Rate7.0-10.0 Cum/hr
    • EFFECTIVE AREA OF MEMBRANE0.1 sq. m
    • OPERATING TEMPERATURE RANGE35 Deg. Celsius
    • Temperature ToleranceMaximum 85 Deg. Celsius
    • Size of End ConnectionNpt
    • Moc of Membrane SupportPvc
    • Moc of Membrane ClampsSs-304
    • Moc of End CapPvc
    • Moc of End ConnectorPvc
    ...more
    www

    Aquatech International

    Patparganj, Delhi
    GST 11 yrs 4.5 (26)
  • Premium
    Tube Diffusers

    Tube Diffusers

    350 - 500 / Piece
    • MOQ20 Piece(s)
    • Size5inch, 6inch
    • Number Of FlowerTube Diffusers
    • MaterialAluminum, Ceramics, Stainless Steel
    • ShapeOval, Round, Square
    • Thickness1mm, 2mm, 3mm, 4mm, 5mm
    • ApplicationExterior Decor, Interior Decor
    • FeatureDust Free, Fine Finishing, Heat Resistance, Light Weight, Long Life
    • AppearanceAntique
    • FinishingPolished
    • Our team professionals and experts ensure that the transactions done are exactly as per the guidelines. We maintain stern records of all the transactions done to gain complete satisfaction of our clients. We are a leading name offering the best in class and qualitative array of Tube Diffusers. Our super durable tube diffusers are available in various sizes like 215mm, 260mm, 300mm, etc. 
    ...more
    www

    M/s Biotech India

    Sangam Vihar, Delhi
    GST 11 yrs 4.4 (28)
  • Premium
    Tube Diffuser

    Tube Diffuser

    Get Price Quote
    • Size7inch, 8inch
    • MaterialAluminum
    • ShapeRound
    • Thickness1mm, 2mm
    • FeatureFine Finishing, Heat Resistance, Humidity Control
    • FinishingPolished
    ...more
    www

    Idol Agencies

    Nipani, Belgaum
    16 yrs 4.5 (30)
  • Premium
    Diffused Aeration System +1

    Diffused Aeration System

    500,000 - 3,000,000 / Set
    • Number Of FlowerDiffused Aeration System
    • CertificationISO 9001:2015
    • ApplicationIndustrial, Waste Water Treatment, Effluent Treatment Plant
    • ConditionNew
    • CapacityAS Per Client's Requried
    • Body MaterialDiffuser- EPDM/Silicon
    • Power SourceElectric
    • Industrial UseIndustrial
    • Country of Origin440V
    • Control TypeSemi Automatic
    • Country of OriginIndia
    • It is  an arrangement of submerged diffusers to introduce fine air bubbles in to waste water/ Effluent in a biological treatment system.   Type : Fine Bubble System / Fixed, Retrovable Design Cap : As per Design Size :   Moc : EPDM / Silicon
    ...more
    www

    Distington Engineers & Consultants Pvt. Ltd

    Anoop Nagar, Indore
    GST 10 yrs 4.6 (21)
  • Premium
    Fine Bubble Diffuser

    Fine Bubble Diffuser

    150 - 250 / Piece
    • MOQ5 Piece
    • Country of OriginIndia
    • Model/TypeEws-63/1000, 63/610
    • Air flow Rate5(m3/h)
    • Motor3 kw
    • Oxygenation Capacity0.35 (kgO2/h)
    • Service Area10 m2 (m2)
    ...more
    www

    Disha Aqua Trading

    Nai Basti, Ghaziabad
    GST 4 yrs
  • Fine Bubble Tube Diffusers +2

    Fine Bubble Tube Diffusers

    2,000 - 10,000 / pc
    • Number Of FlowerBubble Diffuser
    • MaterialStainless Steel
    • Thickness2mm
    • Scogen is India's largest diffsuer manufacturer. Out tube diffusers stand the test of time and are robust and long lasting with a very high SOTE achievable.  Our Membrane MOCs include EPDM, Silicone, PU and EPDM++
    ...more

    Southern Cogen Systems Pvt. Ltd.

    Nanjangud, Mysore
    16 yrs
  • Diffused Aeration System

    Diffused Aeration System

    Get Price Quote
    Air from a blower will be diffused through a Diffuser grid. It consists of porous membranes of dia disc or tubular type diffusers made of EPDM material. The diffusers are of non-buoyant type, which during shutdown condition contracts to prevent any back-flow. Diffusers are designed to ensure uniform permeability and to produce a flow of fine air bubbles and provides high contact area and more contact time due to slow rise of the bubbles which makes the system very efficient in terms of oxygen transfer efficiency thus low installed HP for the blower drive and hence low operational cost.
    ...more

    Alpha Water Technologies India P Ltd.

    Vanagaram, Chennai
    8 yrs
  • Fine Bubble Diffuser

    Fine Bubble Diffuser

    600 / Piece
    • Country of OriginMade in India
    • Type Of AeratorSurface Fixed
    • Usage/ApplicationAquaculture
    • Air Flow Rate5(m3/h)
    • Type Of BubbleFine Bubble
    • Bubble Diameter1 mm
    • Automation GradeAutomatic
    • Voltage380V
    ...more

    HYDRO WATER RECYCLING TECHNOLOGY

    delhi
    4 yrs
  • 63X1000 Mm Fine Bubble Tube Diffuser With EPDM Membrane

    63X1000 Mm Fine Bubble Tube Diffuser With EPDM Membrane

    Get Price Quote
    • Number Of FlowerTube Diffuser
    • MaterialEPDM
    • Size63x1000 Mm
    • Connection Type3/4
    • 63(dia)X1000(length) EPDM fine bubble tube diffusers must be installaed using 3/4″ or 1″ NPT nipple connection with saddle if pvc pipes and for ss pipes nipple must be welded to header pipe, diffuser cannot be installed without using nipple.
    ...more

    AASHRITHA SAWAS SYSTEMS LLP

    Patancheru, Hyderabad
    5 yrs
  • Premium
    Fine Bubble Tube Diffuser +2

    Fine Bubble Tube Diffuser

    1,000 - 1,800 / Piece
    • MOQ20 Piece
    • Brand NameGeneric
    • MaterialSilicone And EPDM,EPDM And Silicone
    • FinishingNot Applicable
    • ShapeTubular
    • ApplicationAeration Tanks
    • Size4 Inch,4 Inch X 1000 Mm,93mm X 1000 Mm,63mm X 1000 Mm,63 Mm X 610 Mm
    • FeatureFine Finishing, Long Life, Rust Proof
    • Number Of FlowerTube Type Fine Pore Air Diffusers
    • Country of OriginIndia
    • Tube-type fine pore diffusers made from silicone and EPDM are essential for aeration tanks in wastewater treatment. These diffusers introduce air into water, promoting aerobic microbial growth that breaks down organic matter.Silicone offers flexibility and chemical resistance, while EPDM is durable against aging and harsh conditions. Their fine pore design generates small bubbles, enhancing oxygen transfer efficiency. This results in improved aeration performance and reduced energy consumption. Additionally, these diffusers require minimal maintenance due to their robust construction, making them cost-effective.They are versatile, suitable for municipal and industrial wastewater treatment, as well as aquaculture applications. Overall, silicone and EPDM diffusers are crucial for effective and sustainable wastewater management.
    ...more
    www

    Tatva Enviro Engineers

    Dholka, Ahmedabad
    GST 5 yrs
  • Bubble Tube Diffuser

    Bubble Tube Diffuser

    600 / Piece
    • MOQ5 Piece
    • Number Of FlowerSurface Floating
    • ApplicationWaste Water Treatment
    • Air Flow Rate1 (m3/h)
    • Treatment TechniqueSewage Treatment Aeration
    • Type of BubbleFine Bubble
    • Bubble Diameter3 mm
    • Automation GradeSemi-Automatic
    ...more

    Somu Filtration

    Jahangir Puri, delhi
    GST 4 yrs 5.0 (1)
  • Membrane Tube Diffuser

    Membrane Tube Diffuser

    Get Price Quote
    Oxygenation in the aeration tank to facilitate selective nitrification.  Continuous or intermittent aeration  Grit trap aeration.  Aeration of collecting and intermediate storage tanks.  Restoration (aeration) of rivers and lakes.  Aquaculture (fish farming).  Industrial & Municipal aeration tank. Temperature Range :  -40°C to +90°C Delivery variants:  Further diameters and lengths available on request.  Transparent (standard)  Special colours: full coloured  Customer specific product marking.  Other accessories available Properties :  3-4 times long life than SILICON / EPDM Membrane.  Very good resistance to Industrial wastewater.  25% reduction in energy costs compared to conventional diffusers.  High oxygen transfer efficiency (OP) up to 5.5Kg/KWh with underdamped population density.  Quickly and easily fitted.  Permanently elastic membrane.  Excellent mechanical and chemical properties compared to silicone and EPDM.  Optimized slit perforation.
    ...more

    Annapurna

    Vikas Marg, Delhi
    8 yrs
  • Fine Bubble Diffuser +1

    Fine Bubble Diffuser

    Get Price Quote
    • MOQ1 CPM
    • Country of OriginIndia
    • Thickness3mm
    • ApplicationHome, Hotel, Interior Decor
    • FeatureDust Free, Fine Finishing, Heat Resistance, Humidity Control
    • AppearanceAntique
    • FinishingPolished
    • Fine Bubble Diffusers are Produce a very small air Bubbles, which arise normally from the floor of a waste water treatment plant. They are capable to provide the efficient mass oxygen for the water. They have the bacteria to produce enzymes for lifting up the bubbles. These diffusers are very smaller in size. They are very Innovative by its advanced technology. Bioflow Industries offers them as per the need of customersAvailable TypesSilicon | EPDM | TPEFeaturesDimensional accuracy | Sturdy Construction | Elevated DurabilityApplicationsAqua Culture | Drinking water aeration | Municipal waste water treatment plants | Industrial waste water treatment
    ...more

    BIOFLOW INDUSTRIES PRIVATE LIMITED

    Rai, Sonipat
    4 yrs 5.0 (1)
  • Premium
    Fine Bubble Diffuser

    Fine Bubble Diffuser

    Get Price Quote
    • MOQ1 Piece
    • Country of OriginIndia
    • Number Of FlowerDisc / Tube
    • MaterialEPDM / Silicon
    • Size6” / 9” / 12” / 63 x 1000 / 90 x 1000
    • ApplicationSTP / ETP / Aqua-Culture
    • Air Flow2 cum. to 15 cum.
    ...more
    www

    Green Circle Enviro Engineers

    Saswad, Pune
    GST 9 yrs 4.6 (8)
  • Fine Bubble Tube Diffuser

    Fine Bubble Tube Diffuser

    800 / Piece
    • Size60 x 1000 & 90 x 1000mm
    • ApplicationAeration Process
    • MaterialEPDM / Silicon
    • Brand NameEnvifab
    • Country of OriginMade in India
    • Type Of BubbleFine Bubble
    • Diameter60 & 90 mm
    • Bubble Size1 to 2 mm
    • Air Flow2.0 - 7.0 cum/hr
    • Temperature35 - 85 Degree
    • Model Name/NumberFTD-600 & FTD-1000
    • Diffuser BodyHeavy Duty PVC
    • Effective Area of Membrane0.1 Sq.m
    • End Connection3/4" NPT
    ...more

    Envifab Equipments

    Sola, Ahmedabad
    GST 9 yrs
  • Silicon Tube Diffuser

    Silicon Tube Diffuser

    1,490 / Piece
    • Size90mm X 1000mm, 63mm X 1000mm, 63mm X 610mm
    • MaterialSilicon
    • Item CodesiliconTP636S
    • Usage/ApplicationPond Aeration, Waste Water Treatment, Aquaculture Fish Farm, Sewage Treatment Aeration
    • BrandProflex
    • Membrane MaterialSilicon
    • Membrane Length250mm - 1000mm
    ...more

    Tecpro Energy Systems

    Villivakkam, Chennai
    9 yrs
  • EPDM Membrane Tube Diffuser

    EPDM Membrane Tube Diffuser

    Get Price Quote
    • MaterialRubber, thermoplastic
    • SizeAs per customer requirements
    • ApplicationIndustrial Use
    • ShapeAs per Customer Requirements
    • ColourMulticolour
    • DimensionsAs per customer requirements
    • HardnessAs per requirements
    • Length10mtrs & as per customer requirements
    • Minimum Order QuantityAs per Customer Needs
    ...more

    Shree Rubber Products

    Virar East
    GST 5 yrs
  • Fine Bubble Diffuser

    Fine Bubble Diffuser

    650 - 1,250 / Piece
    • MOQ1 Piece
    • SizeStandard
    • ShapeRound
    • Thickness5mm
    • ApplicationIndustrial
    • FeatureFine Finishing, Rust Proof
    ...more

    CGL Enviro Enterprises

    Sector 6, Noida
    GST 4 yrs 5.0 (1)
  • Fine Bubble Diffuser

    Fine Bubble Diffuser

    400 - 600 / Piece
    • MOQ5 Piece
    • Number Of FlowerTube Diffusers
    • MaterialStainless Steel
    • ShapeRound
    • Thickness2mm
    • ApplicationHotel
    • Country of OriginIndia
    • Brand NameBharat
    • Advanced shipping services, well-planned and organized facilities; we are flexible in presenting the product range with utmost safety. The quality analysis system, we have, is headed by a pool of professional quality experts having rich domain experience.
    ...more

    Bharat Industries

    Kavi Nagar, Ghaziabad
    16 yrs 4.0 (1)
  • Fine Bubble Diffuser

    Fine Bubble Diffuser

    Get Price Quote
    We serve the clients by offering the superior quality Fine Bubble Diffuser. Our range of Fine Bubble Diffuser is widely demanded for fine bubble diffused aeration. These Fine Bubble Diffusers are made using high quality raw materials and have a long usable life. Coming with easy and fast installation features, our Fine Bubble Diffuser is highly demanded. Brief About Product : Industries where this product is used : Where waste water is generated Colors & packaging available : Black & Poly BagsRaw Material Used : EPDM & Silicon Applications : Increases capacity of clarifierEnhances particle agglomeration and growthIncreases capacity of clarifierEnhances suspended solids concentrationInstallation is fast and easy Specifications TypeMembrane ODLengthAir Flow RatePPA-63-61063 mm610 mm2.0 - 7.0 m3/hrPPA-63-100063 mm1000 mm7.0-½ 10.0 m3/hrPPA-90-100090 mm1000 mm9.0-½ 12.5 m3/hr
    ...more

    Enhance Eco Tech Solution Pvt Ltd

    Charmswood Village, Faridabad
    14 yrs
  • Fine Bubble Diffuser +6

    Fine Bubble Diffuser

    Get Price Quote
    • Brand NameWater 2
    • ApplicationMunicipal wastewater treatment,Intermittent operation capability,Raw water treatment.
    • Country of OriginDelhi
    • Product NameFine Bubble Diffuser
    • ConditionGood
    • Min. Order QuantityAs per client requirement
    • Aporous Tube or Disc or Strip through which air is forced and divided into minute bubbles for diffusion in the water thereby increasing the oxygen quantity in the water or the fluid. This is advanced in the view of better performance, high oxygen transfer efficiency, low power consumption and cost effective due to low maintenance.   Fine bubble membrane diffuser generally delivers greatest energy saving When they can be distributed in more uniform distribution on the floor of the basin. In diffused type of aeration system the size of the bubble play a major role. Bubble diameter can critically affect proces efficiency because it determines the surface area of the bubbles. Surprisingly, the most important factor has been found to be the ratio of the surface energy of the diffuser material at the water interface to the surface tension of the liquid. The higher the ratio, the smaller the bubbles.   Structure : Membrane with micro slits to prevent clogging and back flow with flexibility of air volume. Membrane rim sealed with the base with stainless steel screw for prevention of side leakage. Perforated Membrane with Low Plasticizer EPDM / SILICON rubber compound. Membrane Support Base with uPVC / PP of high pressure. Advantage : High oxygen transfer efficiency. High resistance to clogging. High resistance to corrosion. Small diameter of air bubble. Wide air flow range. Low pressure loss. Low energy cost. Easy installation. Water-stirring effect. Back flow prevention. Self cleaning operation. Intermittent operation capability. Application : Municipal wastewater treatment. Intermittent operation capability. Raw water treatment. Sludge stabilization. Aeration offish ponds. Aeration of streams and lakes.
    ...more

    Water 2 People Teknologies

    Naraina, Delhi
    GST 12 yrs
  • Automatic Venturi Aeration System

    Automatic Venturi Aeration System

    Get Price Quote
    • Power SourceElectric
    • ApplicationWaste Water Treatment
    • Automation GradeAutomatic
    • Installation Services AvailableYes
    • Installation Services RequiredYes
    ...more

    Concept Engineering Services

    Koppa Gate, Bangalore
    9 yrs
  • Tube Diffuser +2

    Tube Diffuser

    850 - 1,250 / Piece
    • MOQ20 Piece
    • Brand NamePP Aquatech
    • MaterialEPDM/ SILICON
    • FinishingNon Polished
    • ShapeTubalar
    • ApplicationSewage Treatment Aeration
    • Size65 X 610,65 X 1000,90x X1000mm
    • CertificationCE CERTIFICATE
    • FeatureDust Free, Fine Finishing, Heat Resistance, Humidity Control, Light Weight, Long Life, Water Proof, Premium Quality,Top Performance,Durable
    • Number Of FlowerTube Diffusers
    • Thickness2mm
    • AppearanceAntique
    • Installationas required
    • Country of OriginIndia
    • Type of AeratorDiffused Aerations, Submersible Aerators
    • Air Flow Rate1 (m3/h), 5(m3/h), 3 (m3/h), 8 (m3/h)
    • Motor3 kw, 4 kw, 5 kw, 2 kw
    • Treatment TechniqueFluidized Aerated Reactor, Bio Tower, Clarifier, Mixed Bed Bio Reactor
    • Automation GradeAutomatic, Semi-Automatic
    • Service Area (m2)0.25 m2, 5 m2, 1 m2, 10 m2
    • ProcessingIndustry Waste Water Etc
    • We ( PP AQUATECH PRIVATE LIMITED) are a manufacturer, Supplier & xporters of fine bubble diffuser in EPDM and silicon.

    P P Aquatech Pvt Ltd

    Pul Pehlad Pur, Delhi
    GST 17 yrs 4.6 (22)
  • Solar Day Tube Light Diffuser

    Solar Day Tube Light Diffuser

    Get Price Quote
    • ShapeDome & Flat Shaped
    • Body MaterialAluminum
    • Lighting ColorCool daylight
    • FeaturesLow Roof, Lighting

    Star Roofing Solutions

    Shastri Park, Delhi
    10 yrs
  • Fine Bubble Tube Diffuser +2

    Fine Bubble Tube Diffuser

    2,000 / Piece
    • MOQ50 Piece
    • Number Of FlowerTube Diffusers
    • ShapeRectangular
    • Air Flow Rate5-12 M3/hr
    • DimensionsSuitable for 63 and 90 mm OD tube diffuser
    • Bubble Diameter1 mm
    • Air Flow Rate5-12 M3/hr
    • Treatment TechniqueMixed Bed Bio Reactor
    ...more

    M/s HMG Beverages

    Ganj, Betul
    9 yrs 5.0 (1)
  • Tube Bubble Diffuser

    Tube Bubble Diffuser

    1,000 / Piece
    • Air flow Rate1 (m3/h)
    • Automation GradeAutomatic
    • Bubble Diameter1 mm
    • Oxygenation Capacity0.13 (kgO2/h)
    • Service Area1 m2 (m2)
    ...more

    Foofishin

    Ernakulam
    7 yrs
More results
Filter by City

GENERAL LINK

Top Cities (India)

top