Control Relay Dealers

Electrical device control ESIM252 allows to expand existing security panels and systems with GSM capabilities. Adds SMS and auto dial alerts a call is dialled and an SMS message is sent to the programed phone numbers. ESIM252 allows prerecord 10 different voice messages up to 15 sec. length each for different user and situation. It is possible to remotely control electric equipment by a call too. Easy configuration ESIM252 supports configuration through USB and SMS. There is an Eldes configuration tool for quick and easy setup. Possibility to add users and change settings later with simple short messages too. Comfortably access event logs through the Internet. Supports non GSM control panels ESIM252 can add GSM and GPRS functionality to almost any security control panel. Expand system’s capabilities with SMS alerts, automatic phone calls and Internet event logs. ESIM252 GSM has 5 inputs and 2 outputs. Business flexibility Up to 5 users can use one ESIM252 GSM system. It is possible to prerecord up to 10 auto dial messages. Configure ESIM252 so that different users would get alerts only important to them or about devices they are responsible for. Choose between auto call or SMS, maybe some will prefer to receive both + status alerts about auto reboots and device faults. For example: get informed when food vending machine is full of coins by getting an SMS, this will help to avoid unnecessary checking, or monitor ventilation system in your shopping center with accuracy. The system reports about electronic devices failures too.

SC3L microminiature electronic time accumulator has built-in lithium battery and small overall dimensions and is used to provide time accumulation in various types of circuits.

Contact protection relays are used in type 821 contact devices. They increase the switching reliability and switching capacity of electromechanical contact devices and lower their contact voltage. Undesired switching operations of contact devices caused by vibrations are significantly reduced by a drop-out delay of 0.5 sec. On the side of the contact they operate with a lower control voltage, however, on the output side they can be highly loaded. Contact protection relays consist of a power supply unit, control unit, switching amplifier and relay output. The contacts are supplied by a control unit with 35 to 40 V clocked DC (i.e. only every hundredth switching occurs under voltage). This enables the optimum contact protection and switching reliability for millions of switching cycles.

We are offering control relays for various electrical applications. We provide these relays to the customers at reasonable prices. The relays are designed as per the international norms. features high switching power small size wide range of application 5 a switching capacity 4 poles configurationac coils 6 to 230 vac dc coils 5 to 110 vdc 1.5 kv dielectric coil to contacts au-clad contact available conform to the ce low voltage directive ul, vde, csa approved standard with led, push with arm and flag application lift-elevators moving stairs textile machines wood working machines plastic molding machines ceramic working machines.

The raw material used in the manufacturing of products are tested stringently by the experts to make certain that the final product is of premium quality and free from any kind of defect. As a trustworthy organization, we store the entire lot in a secured manner in our automated and capacious warehouse. The unit is supervised by our team of experts ensuring complete security.   Details 8 Channel Relay 4 Channel Relay Thermal Relay 8 Pin Replay

Micro controller technology. Wide range of auxiliary supply: 7 V to 35Vdc. Withstands a dip to OV of auxiliary supply for second. Flush mounting Alphanumeric LCD display with keypad for ease of operation. Display and supervision of three phase mains voltages for UV, OV & unbalance.

Designed using advanced technology, the AVF Control Relay is offered by us to clients across India. The AVF Control Relay that we offer is made up of advanced technology and top-grade materials & components, making it widely demanded by the clients. These AVF Control Relays are used in varied industries for protection of 3 phase power supply working equipment against over volt, over frequency, over current, under volt, under frequency, under volt, reserve phasing and single phasing. Salient Features Of Our AVF Control Relay Based on DSP TechnologyCT Ratio ProgrammableTwo no, of Potential Free contactRS 485 Port for computer interfacingEach unit is digital addressablePassword protection setup parameterIndication-16 character, 2 lines LCDEasy to program with front panel keyDisplay of volt, current, frequency, and all set limit on LCD Our AVF Control Relay Is Useful For Control PanelMotor control CentersPower distribution panelPlant Mentoring and control systemGenets panel original equipment manufacturing (OEM) Technical Specifications Sense Voltage : R.Y.B. PhaseSense Current : R.Y.B. PhaseFrequency : 50/60 Hz  +- 3%Panel Mounting : 96*96 mmAccuracy : Class 1Dimensions : LWD (96x6x110 MM)

We are offering control relay. Common options available for all ratings: 6, 9, 12 a control circuits available: ac, dc, low-consumption dc, silent applications: 2.2 kw, 4.5 kw, 5.5 kw in ac3 and ac4 connectors: screw clamp, faston connectors, spring terminals, pins for printed circuit boards

Welcome to the RS Components range of Control Relays. If you're looking to monitor temperature, voltage, current or frequency, you'll find the products within Monitoring Relays. For all of your Signal Conditioning and Conversion requirements, visit our Signal Conditioning range.

We are offering panasonic lighting control relays. features: unique and robust design carries the ul electronic ballast rating low power consumption for operation easy onoff status recognition and commissioning for contractors.

  Control Relay and Instrumentation Panels to control and monitor Protection Relays and Measuring devices of 33kV and 66kV Sub Station with MIMIC diagrams.

We offer Relay Control System use full for control labs. In the present unit a simulated second order system is controlled by an electronic relay. Apart from a study of the relay characteristics the experiment introduces the concept of Describing Function. Finally the phase plane method of analysis is covered in detail where the switching trajectories can be displayed on an X-Y oscilloscope. Highlights >>System with electronic relay >>Adjustable hysteresis and dead zone >>Display phase plane diagram on CRO >>Stability study by describing function method Experiments >>Study of the relay characteristics and display of the same on CRO for different values of hysteresis and dead zones. >>Study of the effect of hysteresis on system stability. Graphical analysis to predict sustained oscillations. >>Phase plane analysis of relay control system for various values of Hysteresis and Dead Zones. View the trajectory for different hysteresis and dead zone. Features and Specifications >>Simulated electronic relay using high speed IC's >>Simulated 2nd order linear plant. Facility for displaying x and x. signals >>Dead zone variable from 0-600mV >>Hysteresis variable from 0-500mV >>Built-in signal sources – Sine and Square Amplitude: 0-1V (min.) Variable Frequency: 10, 20, 40, 80, 100, 200, 400, 800 and 1000Hz >>IC regulated internal power supplies >>Literature and patch cords included >>Accessory - a dual beam CRO The experiment is complete in all respect, except a CRO.