Wireless Motion Detector Dealers

High performance, non regulating PIR Occupancy SensorsParameter Name, COP 10006,Sensing Technique,Passive Infrared,Max. height, 2.8 m,Area of Detection,7 m,Lighting Load - switching,10 sec to 30 min,Lighting Load - dimming CFLFTL,6 ballasts

We offer pir motion detector. A pir-based motion detector is used to sense movement of people, animals, or other objects. They are commonly used in burglar alarms and automatically-activated lighting systems. They are commonly called simply "pir", or sometimes "pid", for "passive infrared detector". This wall mountpir sensor works on the principle of passive infrared detection from the infrared heat emitted by human beings. The fresnel lens of this light control motion sensor has an angle of aperture of 180'360' as it is wall mounted and therefore can only detect human motion in front of the lens and not behind it. The detection lens of the light control motion sensor is mounted on a pivot for adjusting the tilt angle to suit the application area applications: main entrance toilet pantry stairways lifts lobby covered parking area lockers room trial rooms office atm malls and many more!!! specifications: detection range 360°180° power source 220-240vac power frequency 5060hz rated load max.1200w (220-240vac) detection distance max.6m(24℃) time delay 10sec± 3sec to 7min±2min(adjustable) installation height 2.2m - 4m protection class ip 44

Product ID: 1136 The PIR Sensor module allows you to sense motion. It is almost always used to detect the motion of a human body within the sensor's range. It is often referred to used "PIR", "Pyroelectric", "Passive Infrared" and "IR Motion" sensor. Compatible with ARDUINO, RASPBERRY PI, AVR, PIC, 8051, etc 100% Brand New and High Quality Infrared Sensor with Control Circuit Board The Sensitivity and Holding Time Can be adjusted. Working Voltage Range: DC 4.5V- 20V Current Drain:

* The PIR detects human movement and temperature of monitored area.* When movement is detected the PIR Sensor will send a signal to the main unit triggering an alarm.* It has a long battery life and very easy to install and maintain.* Batteries can be changed within 1 min without any hassle of removing the covers and screws.  

WIRED DOOR SENSOR The Honeywell 951WG is a miniature recessed contact with 12” wire leads. You can use the 951WG recessed contact to protect doors and windows from intrusion. As the included magnet is only 3/4” long, the 951WG is ideal for windows and doors that have a thinner frame such as casement windows and sliding windows. You can order the miniature recessed contact in your choice of white (951WG-WH) or brown (951WG-BR).

A PIR-based motion detector is used to sense movement of people, animals, or other objects. They are commonly used in burglar alarms and automatically-activated lighting systems. They are commonly called simply "PIR", or sometimes "PID", for "passive infrared detector".

We are offering a wide range of Pir Motion Detector. Specification : voltage – 5v-20v power consumption : 65ma ttl output : 3.3v delay time : adjustable (0.2->5min) lock time: 0.2 sec trigger methods : l-disable repeat trigger, h enable repeat trigger sensing range : less than 120 degree within 7 meter temperature – 15~+70 dimension : 32*24mm, distance between screw 28mm, m2 lens dimension in diameter : 23mm application : automatically sensing light for floor, bathroom, basement, porch, warehouse, garage etc, ventilator, alarm etc.

we are offering Pir + Mw Motion Sensor. • advanced dro type microwave sensor • target size verification (tsv) technology • superior rfi and emi protection • adjustable microwave detection range • almost no false triggering. • fluorescent light interference filter circuit

For the diverse requirements of our clients we are offering an extensive range of PIR Sensor & Human Body Sensor. A passive infrared sensor (PIR Sensor) is an electronic sensor that measures infrared (IR) light radiating from objects in its field of view. It is almost always used to detect the motion of a human body within the sensor's range.

Working voltage: for DC 5V Single channel signal output Low level output signal used for human body touch sensor alarm Adjustable sensitivity With fixed bolt hole for easy installation Forum link: facebook.com/123Neonado Material: PCB + Brass Dimensions: 43 x 16 x 15 mm / 1.69 x 0.63 x 0.59 inch Weight: 3 g / 0.11 oz Color: red + blue

We are offering pir sensor with direct switching. Directly switches on light when it is dark and human motion is detected. Max. Load : 100 watts ambient light intesity trigger level : can be adjusted as required. On time after triggering : settable from 15 secs to 5 min. Metal mounting clamp provided.