Joy Krishna Engineering Works Howrah, West Bengal

Situated in Howrah West Bengal in India Joy Krishna Engineering Works is Manufacturers of U PVC Pipe Featurers: Range:1" to 5" outer diameter (25 mm to 125 mm Nominal Diameter). Color:White.

Situated at Howrah Kolkata West Bengal in India Joy Krishna Engineering Works is Manufacturer All Types of Solinoid Valve. Features: Sizes:10mm (3/8") to 75mm (3") End Connections Standard:BSP, Optional-NPT. Construction-Body:Upto 20mm (3/4") Brass Forged IS 6912 and above in SS ASTM A351 Gr. CF8 Optional:SS ASTM A351 Gr.CF8M. Diaphragm Seat:Standard-Nitrile (Buna 'N') Optional-Neoprene, Viton and other. Differential Pressure:0.5 to 10 bar. Temperature of fluid:-5°C to 120°C.

Situated in Howrah West Bengal in India Joy Krishna Engineering Works is Manufacturers of RCC Pipe.RCC (Reinforced cement concrete) pipes that are used for water supply schemes, drainage works, culverts and other purposes. Produced by centrifugal spinning process & tested on various parameter. Our range of RCC pipes are available in different constructions such as plain type, socket end type, tung type and groove end type.   Featurers:   RCC Pipes are available in Sizes: 6", 8", 9", 10", 12", 16", 18", 24" Length Available: 2mtrs, 2.5mtrs  

Situated in Howrah West Bengal in India Joy Krishna Engineering Works is Manufacturers of PVC Pipe. Specification: Colour:Grey, Dark Grey, White, Blue, Green. Specific Gravity:1 .38 g/cm3 Water absorption:(% in 24 his @ 23 °C) 0.05% Compressive Strength (Mpa):66 Mpa Tensile Strength (Mpa 26°C):52 Mpa Modulus of Elasticity in Tension(@ 23 °C):3400 Mpa Flexural Strength (Mpa):93 Mpa Impact Strength (izod) (kgf.m):0.098 kgf.m Specific Heat (Cal / g /°C):Appro. 0.25 Maximum Operating Temperature (Under Pressure):60° C Softening temperature (BS 2782) °C:78° C. Electrical Resistance:Greater than 10 14 ohm.cm Thermal Conductivity:16 X 10° wm -1 °c -1 Heat Resistance at continuous Drainage (°C):(66 °C) Support Combustion No.:Self Extinguishing

Situated at Howrah Kolkata West Bengal in India Joy Krishna Engineering Works is manufacturers & suppliers of Pressure Relief Valve in compliance with API 520 / ASME Section Vlll – Division l for High performance application for use on vapor, gas and liquid for over pressure protection. This Conventional safety / pressure relief valves are versatile, safe & interchangeable. Features: Size: 25 x 50 mm to 250 x 350 mm. Rating: 150 # to 2500 #. Material: Cast steel, Alloy steel and Stainless steel. End connection: Flanged end. Design: API, ASME & IBR. Accessories: Lever , soft seat, Test Garg, Bellows etc.

Situated at Howrah Kolkata West Bengal in India Joy Krishna Engineering Works is manufacturers & suppliers of Pressure Reducing Valves. These products are widely demanded by the clients for their durability and sturdiness. These products are widely used in various industries. Features: Pretty Cost effective because of high efficiency Simple and design makes them easy to install. Requires very low maintenance. They are direct acting types valves which serve as the actuating means for operating the valve plugs. These valves can be custom designed as per specific requirements.

Situated at Howrah(Kolkata) West Bengal in India Joy Krishna Engineering Works is Manufacturers Exporters Suppliers Traders Dealers of Non Return Valve(Cast Iron D/F Non Return (Reflex) Valves Single & Multi - Door As Per IS : 5312).The offered valves are highly appreciated in various industries across the country owing to features like durability and efficiency, sturdy construction and resistance to corrosion. Additionally, it requires low maintenance. Further, this high performance range of valves is available at the most competitive prices.   Features:   Low maintenance Resistance against corrosion Precise design  

Situated in Howrah West Bengal in India Joy Krishna Engineering Works is Manufacturers of M.S PIPE. Product Details: Unit Length:20 Feet Shape:Round. Specifications: Diameter: 10 * 20mm/15mm*15mm - 200mm Thickness: 0.5mm - 12mm Length: 1-12m. Material: Carbon Steel.

Situated at Howrah Kolkata West Bengal in India Joy Krishna Engineering Works is Manufacturing and Exporting wide range of M.S Fittings.These have excellent finish, achieved with black painting, anti rust oil, and hot & cold galvanized. Further, due to their high tensile strength and leak proof nature the offered MS Fittings are applicable in pressure fluid pipeline, petroleum & natural gas, chemical, drilling, fertilizer equipment and pharmaceutical industries. Manufactured using quality material like carbon steel, stainless steel and alloys, these are perfect for aforesaid applications. Key features of offered MS Fittings:- Extreme corrosion resistance Dimensional accuracy Good Thermal resistance & Chemical resistance Durability Sturdy in construction Easy installation

Situated in Howrah West Bengal in India Joy Krishna Engineering Works is Manufacturers of HDPE Pipe. Features: Durable. Superior sturdiness. High dimensional accuracy Material:HDPE Range:Ø20 to Ø630mm Pressure Rating:2.5kgf/cm2 to 25kgf/cm2 Length:Available in straight lengths of 1 meter to 12 meters for all sizes Coil up to 110mm outer diameter size Material Grades:PE-63, 80 & 100

Situated at Howrah Kolkata West Bengal in India Joy Krishna Engineering Works is leading manufacturer, supplier, trader and exporter of of Globe Valves. These products are available in various sizes and specifications. Features: Application: For handling naptha derivatives in oil refineries for handling water, steam, air, gas, or liquid with corrosive properties suitable for working conditions as per temp/pressure ratings. All dimensions are in mm Flanges: drilled to ANSI b 16.1 Raised face to ANSI B 16.5 Testing as per API598 Standard: API 600-CLASS 150 & 300 Operation: manual/gear/electrical actuator/head stock with extended spindle For higher sizes refer to company

Situated at Howrah Kolkata West Bengal in India Joy Krishna Engineering Works is Manufacturing and Exporting wide range of GI Pipes, Galvanized Steel Pipes & Steel Tubes for various purposes. Apart from the following standard range of products we also manufacture customized products as per the requirement of the buyers which makes us the leading GI Pipe manufacturers, GI Pipe suppliers, GI Pipe exporters and distributors.GI Pipes/Galvanized steel pipes are covered by a layer of zinc .GI pipes and tubes are mostly used in structural applications. GI steel pipes and tubes are available in various size and shapes based on the customers requirements. Pipes and tubing made of GI steel has long been one of the most used building materials in the world. For decades, designers, builders and consumers seeking long-term structural performance in the harshest of outdoor applications have turned to zinc-coated steel pipes. Zinc-coated galvanized steel pipes and tube resist the attack of wind, water and road saltsGalvanized Steel are those steel that has been covered with a layer of zinc metal. During galvanizing, steel is immersed in a molten zinc bath, ensuring a tough, uniform barrier coating. Zinc's natural corrosion resistance provides long-term protection, even in outdoor environments. Apart from preventing water corrosion, it is equally effective in dry, indoor environments. Features: Steel Pipes manufactured as per ASTM specification. Manufactures galvanized hollow sections. Leading manufacturers of manipulated tubes.

Situated at Howrah Kolkata West Bengal in India Joy Krishna Engineering Works is manufacturers & suppliers of Foot Valves As Per IS : 4038.. These products are widely demanded by the clients for their precise performance and easy installation. The products we offer are made by the skilled professionals. Our products are suitable for various applications and known for rendering smooth performance.. These products are widely used in various industries. Features: Durable Reliable Easy to use

Situated at Howrah Kolkata West Bengal in India Joy Krishna Engineering Works is Manufacturing and Exporting wide range of Flange on Double Socket Tee.  

Situated at Howrah Kolkata West Bengal in India Joy Krishna Engineering Works is Manufacturing and Exporting wide range of Double Socket Taper.  

Situated at Howrah Kolkata West Bengal in India Joy Krishna Engineering Works is Manufacturing and Exporting wide range of Double Socket Bend.These are manufactured using latest technology to provide an outstanding range of products. Besides, we offer highly qualitative range of products with the help of our skilled team. These are made of high quality stainless steel to provide the best bends which are used in industrial sectors. Our completely products are ISI marked as per IS 9523-2000. They are available in different sizes varying from 80mm to 1200mm. Features: Long Life. Industry Leading Prices. High Durability.

Situated at Howrah Kolkata West Bengal in India Joy Krishna Engineering Works is Manufacturing and Exporting wide range of Double Flange Bend

Situated at Howrah Kolkata West Bengal India Joy Krishna Engineering Works is leading S.S.I. unit of Howrah having ISO: 9001:2008 certifications from D.N.V and NSIC registered unit.Joy Krishna Engineering Works is one of the prominent manufacturers & suppliers of D.I.Sluice Valve.There is wide spectrum of these valves available with us. These are designed in best manner. We are offering these valves in customized and non customized options to our clients. These sluice valves are flawless in their performance and have robust construction as well. Last but not the least, we are offering these at affordable price. . Features: International design Guranteed Quality Standard specification

Situated at Howrah Kolkata West Bengal in India Joy Krishna Engineering Works is manufacturers & suppliers of D.I.Puddle Pipe.These pipes are available to clients in various specifications at affordable prices. These are made using premium quality ductile iron. The raw material we are using in their production is purchased from amongst the trusted and certified suppliers of the industry.   Features:   Rigid construction. Perfect finish Corrosion resistance.  

Situated at Howrah Kolkata West Bengal in India Joy Krishna Engineering Works is Manufacturers of D.I.Double Flanged Pipe

Situated at Howrah Kolkata West Bengal in India Joy Krishna Engineering Works is manufacturers & suppliers of D.I.Cables Casing Pipe.   Features:   Size: 1/2 inch, 3/4 inch, 1 inch, 2 inch. Unit Length: 3m, 6m, 12m. Shape: Round, Square, Rectangular. Surface Finish: Mill Finished.       Specifications:   Diameter: DN80-DN1200mm. Pipe Wall Thickness: 6.0-15.3mm. Standard: ISO2531/EN545/EN598. Length: 6m/5.7m. Type: Seamless. Material: Ductile Iron.