Single Ferrule Hydraulic Fittings Dealers

We have carved a niche in the market as the trustworthy Manufacturer, Exporter and Supplier of Single Ferrule Compression Tube Fittings in Mumbai, Maharashtra. We take care to procure only those Fittings that conform to the best standards. From their design to their finishing, each parameter is taken care of while testing the Fittings on the qualitative ground. And moreover, we are known for tackling the demand in a foolproof and swift way.

• Size: 1inch, 2Inch, 3/4Inch
• Thickness: 5-10mm
• Application: Hydraulic, Industrial
• Feature: Corrosion Proof, Fine Finishing
• Form: Bolts, Caps, Couplings
• Material Of Construction: Carbon steel, Stainless steel (304/316), Brass
• Payment Mode: Cash, Cheque, DD, Online, Wire Transfer
• Shipment Mode: By road

We provide the clients with Single Ferrule Tube Fittings, which are widely used in industrial hydraulics and pneumatics industry. These Single Ferrule Tube Fittings are available in various inches and the range includes from ¼â�� to 2â��. Apart from this, these fittings are commonly used in inches and NB sizes tubes. Tube To Tube Fittings Straight Union Union Elbow Reducing Union Union Tee Union Cross Reducing Tee. Bulkhead Union Bulkhead Union Elbow Tube To Female Port Male Stud Connector : BSP, Taper , Metric and NPT Male Stud Elbow : BSP, BSP Taper , Metric Male branch Tee Male Run Tee Tube To Male Thread Female Connector : BSP, Metric Tube To Tube port (Adjustable Fittings) Swivel Adjustable Elbow Swivel Adjustable Branch Tee Swivel Adjustable Run Tee Stand Pipe Adaptor Swivel union Banjo Fittings Banjo Elbow High Pressure Banjo Elbow Other Fittings Male Female Adaptor Hex Nipple Dead Plug (closure plug) Union Elbow Reducing Union Union Tee Union Cross Reducing Tee Bulkhead Union Bulkhead Union Elbow

Single Ferrule Fitting is a three piece design consisting of a body portion, a coupling nut and a ferrule. During the assembly the nut is progressively tightened causing hardened ferrule to slide along the inner conical seat of the body and grip the tube. Tightened the nut, ring deforms due to 24° cone of fittings and bites into the steel tube, producing deep cut on the tube. The cut is visible on the outer diameter of the tube. This cut on the tube acts as metallic interlock and makes the joint leak proof at high pressure and under vibration.

• Material: MS, En1A, SS Aluminium, Crass
• Size: 20 mm
• Usage/Application: Tube Fittings
• Is It Rust Proof: Rust Proof
• Features: Corrosion Resistance
• Packaging Type: Box
• Finishing: Polished
• Production Capacity: 10000

We are one of the leading organizations engaged in offering qualitative Single Ferrule Tube Fittings. We manufacture Single Ferrule Tube fittings as per ISO 8434 and DIN 2353. We also manufacture customised Single Ferrule Tube Fittings.

• Type: Hydraulic Fittings
• Material: Mild Steel
• Shape: Elbow, T Shape
• Application: Industrial Use
• Pressure: High Pressure, Low Pressure

we at dev hydraulics & pneumatic design tube fitting to provide leak-proof, secure connections that can withstand high pressure, vibration and vacuum applications. these single ferrule tube fittings are made up of three parts that are precision engineered and machined: body, ferrule, and nut. single ferrule bite type fittings and accessories (three series) are manufactured in accordance with din 2353/iso8434 for fluid application. single ferrule fittings are available in materials like carbon steel, ss304, and ss316. .

Couplings are best suited for stainless steel, copper or stainless steel tubes where brazing, soldering, welding, flaring or threading is not possible or permissible. To cater all your requirements of spares of Hydraulic & Pneumatic applications from one window, we manufacture many types & designs of fittings and couplings,Single Ferrule fittings are three piece designs comprising of a Socket having a conical seat, a hardened Progressive Ring and a Nut. When the Nut is progressively tightened it makes the Ring “to move on to the tube, which subsequently bites into the pipe, thereby forming a visible collar of material in front of it.

Single Ferrule Tube Fittings are ideal for a diverse range of industries, including process oil and gas, petrochemical, power generation, military, pharmaceutical, and more. Os-Lok is your superior alternative to Swagelok fittings & Parker A-lok. Components are fully interchangeable with Swagelok. We offer an assortment of Single Ferrule Tube Fittings & all instrumentation compression tube fittings in a range of corrosion resistant alloy materials, including 304 stainless steel, 316 Stainless Steel, 6Mo, Alloy 400, Alloy 825, Alloy 625, Copper, Brass, Titanium and more. Similar to Parker Instrumentation fittings Os-Lok Stainless steel tube fittingswork reliably on both seamless and welded-redrawn, fully annealed type 304, 316 and 316L tubing.

Single Ferrule Fitting is a three piece design consisting of a body portion, a coupling nut and a ferrule. During the assembly the nut is progressively tightened causing hardened ferrule to slide along the inner conical seat of the body and grip the tube. Tightened the nut, ring deforms due to 24° cone of fittings and bites into the steel tube, producing deep cut on the tube. The cut is visible on the outer diameter of the tube. This cut on the tube acts as metallic interlock and makes the joint leak roof at high pressure and under vibration.

Single ferrule hydraulic fittings The pressure rating depends on wall thickness and construction, both of which are related to the size of tubing. A variety of different tube fitting sizes are used, depending on the application requirement. Hence, the pressure rating of a tube in a particular operation varies based on these factors.

We have created a positive image of ourselves in the market as a Manufacturer and Supplier all types of Single Ferrule Tube Fittings (Parker Type) and DIN-2353 (Ermeto type). Single Ferrule Tube Fittings are designed to give leak-proof, secure connections that can withstand high pressure, vibration and vacuum applications. To this end, Single Ferrule Tube Fittings are made up of three parts that are precision engineered and they are machined body, ferrule and nut. Single Ferrule Tube Fittings are designed for use in control system, process and instrumentation devices. Used In Industries Such As InstrumentationOffshorePulp & Paper millsPetroleum Process plantsPower generation plantsRefineriesChemical Process Plants Chromatography

• Size: 4mm to 42mm OD, 1/4"OD to 2"OD, 1/8"NB to 2"NB
• Reference Tube Coupling Standards for Metric Tube: 24° Cone Bite Type - ISO 8434 - 1, IS : 8805, DIN 2353, ISO 8434 - 4 (Weld Nipple),  BS 2500 - 60° Hose end, ISO 1179 - BSPP (G), Flat Face, BS 5380 - BSPP (G), 'O' Ring Seal
• Reference Port Connector Standards: ISO 6149 - Metric threads, 'O' Rings Seal, SAE J 1926/1, SAE (UNF/UN) threads,  'O' Rings Seal, ISO 6162 - Four Screw, Split Flange (SAE J514), ISO 6164 - Four Screw.
• Series & Pressure Range: LL Series - 100 Bar, L Series - 250 Bar Max, S Series - 630 Bar
• Material of Construction: Carbon Steel, SS304, SS316, Brass (from Solid Bar Stock / Forged Body)
• Surface Treatment: Phosphates, Trivalent (Chrome Vi Free), Zinc Bi - Chromated (A3C)

'ME' Bite type Fittings manufactured to DIN2353 / ISO8434 - 1 for ease of interchangeablity and to maintain high quality standards. Each fittings are precisely machined and checked thoroughly to achive consistant high quality. Wide Selection of Material and configuration suits every applications and ensures leak proof piping & easy pipe layout. Heat treatment of Ferrule ensures perfect bite & assembly.  

Single ferrule Bite type fittings are the most widely used fittings in the world. Single Ferrule Bite Type Fittings are flarless bite type metric fittings that consist of a body, progressive ring (ferrule) and nut. On assembly, two cutting edges of the ferrule "bite" into the outer surface of the tube ensuring the necessary holding power for high operating pressures. Single ferrule bite type Couplings are best suited for steel, copper or stainless steel tubes where brazing, soldering, welding, flaring or threading is not possible or permissible.

With the use of latest machinery, we Manufacture and Supply high quality Single Ferrule Tube Fittings that are heat and corrosion resistant. We have a team of professionals to ensure that finest carbon steel and brass are used to fabricate premium Single Ferrule Tube Fittings. We offer a wide range of Single Ferrule Tube Fittings in various sizes and dimensions. We are known for supplying all orders on time. We offer Single Ferrule Tube Fittings at affordable prices.

• Material: SS
• Application: Pneumatic Connections
• Color: Silver
• Head Type: Round
• Material Grade: 304,316

• Size: 4mm to 42mm
• Material: steel, stainless steel, brass

we are instrumentation Tube Fittings, Compression Tube Fittings, Double Ferrule Tube Fittings, Ferrule Fittings Manufacturer, Ferrule Fittings Suppliers, Twin Ferrule Tube Fittings, Hydraulic Ferrule Fittings, Double Ferrule Compression Fittings, Single Ferrule Compression Fittings, Ferrule Compression Fittings, Compression Ferrule Tube Fittings, Twin Ferrule Compression Fittings, Compression Ferrules, Compression Nut and Ferrule, Instrumentation Fittings Manufacturer, Stainless Steel Compression Fittings, Hydraulic Fittings, Compression Tube Fittings Manufacturers.On demand we can also offer Single Ferrule Fittings in other grades such as brass, copper, nickel alloys and carbon steel. We are offering din 2353 fittings, single ferrule fittings, bite type fittings, ermeto fittings. high pressure steel fittings are manufactured to din 2353 specification and iso 8434-1 for ease of interchangeability. These fittings are available for different pressure rating from 100bar to 630bar.

• Operating Temperature Range: 8000 F (4270 C)

Bite type single ferrule design Stainless Steel, Brass, Steel According to DIN 2353ISO 8434-1 Two-cutting edges and stop edge design useable with tubes or hoses.

Ferrule Fitting of high quality and precision finishing are manufactured by New Eagle Industrial Corporation are are sold under our brand New Eagle Industrial Corporation Ferrule Fitting. We manufacture both single ferrule and double ferrule fittings. Popular brands include Swagelok and Parker. New Eagle Industrial Corporation Single Ferrule Tube Fittings is fully interchangeable with Swagelok & Alok fittings.

• Material: SS
• Size: 1/4 inch-1 inch
• Country of Origin: Made in India
• Usage/Application: Gas Pipe

Single Ferrule Tube Fittings, Tube Clamps, Double Ferrule Fittings