RC networks are used across the coils of the contactors, to protect them from the undesirable transient voltages that are generated during switching off of contactor coils. The induced transient voltage surges can be several times the rated voltage of the coil and can damage the coil of the contactor. These induced voltages also have a high frequency of the order of several KHz and generate noise.
RC networks connected in parallel to the coils of the contactors effectively suppress the surge voltages by absorbing the energy contained in the transients and safely discharging them. The RC networks also filter out the noise generated by the transients.
RC networks are used across the coils of the contactors, to protect them from the undesirable transient voltages that are generated during switching off of contactor coils. The induced transient voltage surges can be several times the rated voltage of the coil and can damage the coil of the contactor. These induced voltages also have a high frequency of the order of several KHz and generate noise.
RC networks connected in parallel to the coils of the contactors effectively suppress the surge voltages by absorbing the energy contained in the transients and safely discharging them. The RC networks also filter out the noise generated by the transients.
Features: • Non-Inductive construction
• Self- Healing property
• Hum free functioning
• Low Dissipation Factor and high Insulation Resistance
• Special Metallized Polyester Film with Internal Fuses for Safety Features
• Capacitance Values: 1µF to 4.7µF in 5% and 10% tolerances
• Test Voltage: 1.6 x Vr for 2 seconds.
• Fire Retardent Encapsulation
Features: • Non-Inductive construction
• Self- Healing property
• Hum free functioning
• Low Dissipation Factor and high Insulation Resistance
• Special Metallized Polyester Film with Internal Fuses for Safety Features
• Capacitance Values: 1µF to 4.7µF in 5% and 10% tolerances
• Test Voltage: 1.6 x Vr for 2 seconds.
• Fire Retardent Encapsulation
El-Ci-Ar MKP - 71 capacitors are unmatched in terms of size, weight, performance and reliability for A C applications. MKP - 71 series of capacitors are specifically designed for POWER ELECTRONICS applications, where the voltage waveform is non-sinusoida! and higher frequency currents are present but peak currents are lower. The MKP-71 capacitors are oil filled which makes heat dissipation more efficient and ensures a long life. MKP-71 capacitors display "self healing property" by which the capacitor has an open circuit mode of failure. This ensures safe operation.
Dielectric :Polypropylene film.
Dissipation Factor (tan d) :
El-Ci-Ar MKP - 71 capacitors are unmatched in terms of size, weight, performance and reliability for A C applications. MKP - 71 series of capacitors are specifically designed for POWER ELECTRONICS applications, where the voltage waveform is non-sinusoida! and higher frequency currents are present but peak currents are lower. The MKP-71 capacitors are oil filled which makes heat dissipation more efficient and ensures a long life. MKP-71 capacitors display "self healing property" by which the capacitor has an open circuit mode of failure. This ensures safe operation.
Dielectric :Polypropylene film.
Dissipation Factor (tan d) :
Features:Oil Impregnated, Aluminium Can Encased, Dielectric - Polypropylene,Electrode - Double Metallised Paper,Coil - Non inductively wound, Extended Foil,Leads - Fast on terminals, weld jointed to coil,Construction - Aluminium can with a threaded stud for mounting.Dissipation Factor
Features:Oil Impregnated, Aluminium Can Encased, Dielectric - Polypropylene,Electrode - Double Metallised Paper,Coil - Non inductively wound, Extended Foil,Leads - Fast on terminals, weld jointed to coil,Construction - Aluminium can with a threaded stud for mounting.Dissipation Factor
Technical specifications of El-Ci-Ar MKP-75 0.47?F600 V AC and 0.5 ?F 1000 V AC oil filled capacitors.
Capacitance Tolerance: ± 10%, ± 10%. Rated Voltage UN:1400 V, 850 V. Periodic Voltage Umax:1800 V, 1050 V. Time constant between terminals:> 3000s, > 3000s. Climatic category:-25°C to + 70°C, -25°C to + 70°C.
Technical specifications of El-Ci-Ar MKP-75 0.47?F600 V AC and 0.5 ?F 1000 V AC oil filled capacitors.
Capacitance Tolerance: ± 10%, ± 10%. Rated Voltage UN:1400 V, 850 V. Periodic Voltage Umax:1800 V, 1050 V. Time constant between terminals:> 3000s, > 3000s. Climatic category:-25°C to + 70°C, -25°C to + 70°C.
Construction:MPP Capacitors are wound with Metallized polypropylene film as dielectric and copper clad steel wire and epoxy coating.Features:· Self healing properties
· Non - inductive construction
· Low Dissipation and High Moisture resistance.
Construction:MPP Capacitors are wound with Metallized polypropylene film as dielectric and copper clad steel wire and epoxy coating.Features:· Self healing properties
· Non - inductive construction
· Low Dissipation and High Moisture resistance.
Yellow 140 mm + 3.8mm ring tag, Solderable terminal 6 mm length. 19.8mm DIA x 32mm L, Bajaj 150 cc three wheele front engine. Bajaj M 50 motorcycle. Bajaj M 80 motorcycle (old).
Under the "ElCiAr" brand we are currently manufacture plastic film capacitors, IGBT and snubber capacitors. We are continually investing in R&D, innovating rigourously to develop new markets.
Yellow 140 mm + 3.8mm ring tag, Solderable terminal 6 mm length. 19.8mm DIA x 32mm L, Bajaj 150 cc three wheele front engine. Bajaj M 50 motorcycle. Bajaj M 80 motorcycle (old).
Under the "ElCiAr" brand we are currently manufacture plastic film capacitors, IGBT and snubber capacitors. We are continually investing in R&D, innovating rigourously to develop new markets.
A Press shop tool room plating unit is located at Gokul road and a fully integrated capacitor manufacturing unit located at Tarihal estate. The current capacity is 20 million with a total installed capacity 40 million comprising of state of the art machinery imported from USA and JAPAN. The entire manufacturing process done under climate controlled conditions. Our film capacitors use oil impregnation technology which is a homegrown technology and perfected for mass manufacture. Our film capacitors have a lot of advantages over metallized capacitors which have been listed below.
1) Higher dvdt rating, higher peak current capacity, higher insulation resistance over metallized capacitors.
2) Oil impregnation of film capacitors acts as a coolant at higher temperatures and prevents breakdown.
3) Mode of failure in film capacitors is in short circuit mode versus open circuit mode for metallized capacitors
A Press shop tool room plating unit is located at Gokul road and a fully integrated capacitor manufacturing unit located at Tarihal estate. The current capacity is 20 million with a total installed capacity 40 million comprising of state of the art machinery imported from USA and JAPAN. The entire manufacturing process done under climate controlled conditions. Our film capacitors use oil impregnation technology which is a homegrown technology and perfected for mass manufacture. Our film capacitors have a lot of advantages over metallized capacitors which have been listed below.
1) Higher dvdt rating, higher peak current capacity, higher insulation resistance over metallized capacitors.
2) Oil impregnation of film capacitors acts as a coolant at higher temperatures and prevents breakdown.
3) Mode of failure in film capacitors is in short circuit mode versus open circuit mode for metallized capacitors
MEA Series capacitors are constructed with metallized polyester film dielectric, tin plated copper leads and tape wrapped by PET film with epoxy sealing. Features:· Self healing properties· Non - inductive construction
· High reliability and excellent long term stability
· Small Size
MEA Series capacitors are constructed with metallized polyester film dielectric, tin plated copper leads and tape wrapped by PET film with epoxy sealing. Features:· Self healing properties· Non - inductive construction
· High reliability and excellent long term stability
· Small Size
Construction:MKT11 Capacitors are wound with Metallized
polyester film as dielectric and tinned copper
wire and FR grade epoxy coating.Features:· Self healing properties
· Non - inductive construction
· Low Dissipation Factor and high
Insulation Resistance
· Hum Free functioning . Application:· In step- type, fan speed regulators.
Construction:MKT11 Capacitors are wound with Metallized
polyester film as dielectric and tinned copper
wire and FR grade epoxy coating.Features:· Self healing properties
· Non - inductive construction
· Low Dissipation Factor and high
Insulation Resistance
· Hum Free functioning . Application:· In step- type, fan speed regulators.
BORGER Capacitors have also found wide acceptance in applications wherever spark ignition combustion is employed. Stationary engines, portable gensets, knapsack sprayers, outboard motors and assorted other units that have varied industrial, commercial, agricultural and marine applications have depended on BORGER Capacitors for their
BORGER Capacitors have also found wide acceptance in applications wherever spark ignition combustion is employed. Stationary engines, portable gensets, knapsack sprayers, outboard motors and assorted other units that have varied industrial, commercial, agricultural and marine applications have depended on BORGER Capacitors for their
Our film capacitors use oil impregnation technology which is a homegrown technology and perfected for mass manufacture. Our film capacitors have a lot of advantages over metallized capacitors which have been listed below.
1) Higher dvdt rating, higher peak current capacity, higher insulation resistance over metallized capacitors.
2) Oil impregnation of film capacitors acts as a coolant at higher temperatures and prevents breakdown.
3) Mode of failure in film capacitors is in short circuit mode versus open circuit mode for metallized capacitors
Our film capacitors use oil impregnation technology which is a homegrown technology and perfected for mass manufacture. Our film capacitors have a lot of advantages over metallized capacitors which have been listed below.
1) Higher dvdt rating, higher peak current capacity, higher insulation resistance over metallized capacitors.
2) Oil impregnation of film capacitors acts as a coolant at higher temperatures and prevents breakdown.
3) Mode of failure in film capacitors is in short circuit mode versus open circuit mode for metallized capacitors
Leads:Axial, Copper Wires, Solder Plated, Pressure Contacts.Markings:Capacitance,Rated Voltage,Type. Dissipation Factor (tan d):= 30,000 M Ohms. for C =10,000 Sec. (M Ohms x mF) for C > 0.33mF.
Leads:Axial, Copper Wires, Solder Plated, Pressure Contacts.Markings:Capacitance,Rated Voltage,Type. Dissipation Factor (tan d):= 30,000 M Ohms. for C =10,000 Sec. (M Ohms x mF) for C > 0.33mF.
Reviews & Ratings
Write a Review
Post Free Ad