Power12V DC ± 20%, 200mA full operation, 30mA idle
Operating ConditionsOperating Temperature: -20°C to 55°C
IdentificationLED Status Indicator
AccessoriesPower Cables GSM/GPS dual patch antenna Carrying case
Vehicle tracking device combines GPS with GSM technology using a PC through the Internet. Our GSMGPS Vehicle Tracking system is compact, reliable, affordable and easy to install in any part of the vehicle.
Vehicle tracking device combines GPS with GSM technology using a PC through the Internet. Our GSMGPS Vehicle Tracking system is compact, reliable, affordable and easy to install in any part of the vehicle.
Power produced by Solar PV panels will be delivered to Solar water pump controller, which converts the DC power to AC power to operate water pump The Solar water pump controller automatically regulates output frequency according to solar radiation intensity with built in MPPT tracking function. It is compatible with both linear and non-linear loads.
Power produced by Solar PV panels will be delivered to Solar water pump controller, which converts the DC power to AC power to operate water pump The Solar water pump controller automatically regulates output frequency according to solar radiation intensity with built in MPPT tracking function. It is compatible with both linear and non-linear loads.
Simulators are designed and developed for testing the applications with the actual equipment. These products simulate the
functions of the real equipment. They are designed in the required “form factor” as per the client needs including Handheld
unit, Table top unit etc.
With a deep knowledge of sensors, measurements, switching and routing, safety and self-test of ATE, we are leading in
every area of design and manufacturing. We have an experience in design and manufacturing of Simulators,
Monitoring Test Jigs, Automatic Test Equipment, Interface Test Setups, and Test Program Units.
Simulators are designed and developed for testing the applications with the actual equipment. These products simulate the
functions of the real equipment. They are designed in the required “form factor” as per the client needs including Handheld
unit, Table top unit etc.
With a deep knowledge of sensors, measurements, switching and routing, safety and self-test of ATE, we are leading in
every area of design and manufacturing. We have an experience in design and manufacturing of Simulators,
Monitoring Test Jigs, Automatic Test Equipment, Interface Test Setups, and Test Program Units.
Rider is a rugged series of Hand Held Computers with integrated printer. It comes with open source Linux or Android OS and a SDK that helps in rapid deployment of custom applications which can be developed in Java or C. Rider processor options include ARM Cortex A8A9 and Qualcomm Quad Core Snapdragon 200 series.
The terminal can be equipped with integrated wireless features like GSM, GPRS, WLAN and 3G4G. The optional features that can be integrated include finger print sensor, contactcontactless card reader, RFID etc. It can be deployed virtually for many applications in the field. Its rugged construction and long battery life enhance its field usability.
Rider is a rugged series of Hand Held Computers with integrated printer. It comes with open source Linux or Android OS and a SDK that helps in rapid deployment of custom applications which can be developed in Java or C. Rider processor options include ARM Cortex A8A9 and Qualcomm Quad Core Snapdragon 200 series.
The terminal can be equipped with integrated wireless features like GSM, GPRS, WLAN and 3G4G. The optional features that can be integrated include finger print sensor, contactcontactless card reader, RFID etc. It can be deployed virtually for many applications in the field. Its rugged construction and long battery life enhance its field usability.
Temperature (0°C - 50°C) 5-95% RH (Non condensing)185 mm x 95 mm x 43 mm
A Hand Held Computer with integrated finger print sensor. It comes with open source Linux or Android OS and a SDK, which helps in rapid deployment of custom applications that can be developed in Java or C.The terminal can be equipped with integrated wireless features like GSM, GPRS, WLAN and 3G. It can also be customized with various features like contactcontactless card reader, camera, GPS etc. The device can be deployed virtually for many applications in the field. Its rugged construction and long battery life enhance its usability.
Features
Compact & Low Cost
Rugged IP 65 Compliant
Integrated Optical Finger Print Scanner (Sagem CBM â E3)
High Speed ARM Cortex A8 Processor with 1 Ghz speed
LinuxAndroid OS
3.5 QVGA TFT Display with Touch panel
Integrated GSMGPRS3GEthernetWLAN Modules
Inbuilt 1D2D Bar Code Scanner, Camera and GPS*
Integrated Contactless Card Reader*
A Hand Held Computer with integrated finger print sensor. It comes with open source Linux or Android OS and a SDK, which helps in rapid deployment of custom applications that can be developed in Java or C.The terminal can be equipped with integrated wireless features like GSM, GPRS, WLAN and 3G. It can also be customized with various features like contactcontactless card reader, camera, GPS etc. The device can be deployed virtually for many applications in the field. Its rugged construction and long battery life enhance its usability.
Features
Compact & Low Cost
Rugged IP 65 Compliant
Integrated Optical Finger Print Scanner (Sagem CBM â E3)
High Speed ARM Cortex A8 Processor with 1 Ghz speed
LinuxAndroid OS
3.5 QVGA TFT Display with Touch panel
Integrated GSMGPRS3GEthernetWLAN Modules
Inbuilt 1D2D Bar Code Scanner, Camera and GPS*
Integrated Contactless Card Reader*
A Hand Held Computer which comes with open source Linux or Android OS and a SDK, which helps in rapid deployment of custom applications that can be developed in Java or C. The terminal can be equipped with integrated wireless features like GSM, GPRS, WLAN and 3G. It can be customized with various features like finger print sensor, contactcontactless card reader, camera, GPS etc. The device can be deployed virtually for many applications in the field. Its rugged construction and long battery life enhance its usability.
A Hand Held Computer which comes with open source Linux or Android OS and a SDK, which helps in rapid deployment of custom applications that can be developed in Java or C. The terminal can be equipped with integrated wireless features like GSM, GPRS, WLAN and 3G. It can be customized with various features like finger print sensor, contactcontactless card reader, camera, GPS etc. The device can be deployed virtually for many applications in the field. Its rugged construction and long battery life enhance its usability.
Application : College, Home, Office
Feature : Durable, High Speed, Smooth Function
Screen Size : 3-4 inch
Total Carbohydrate : 1year
Processor : High speed ARM Cortex A8 Processor @1GhZ
Electronic Smart Control Panel (ESCP) is an intelligent control panel designed to operate, monitor and control the agricultural
motor pump sets to ensure high and reliable performance and ease of operation from the user point.
Electronic Smart Control Panel (ESCP) is an intelligent control panel designed to operate, monitor and control the agricultural
motor pump sets to ensure high and reliable performance and ease of operation from the user point.
A DCU is usually installed in a sub-station. It is an intelligent device with built-in LPR modules to acquire data from Electronic Energy Meters or MIUs using AMR Software. Its’ in-built 2G 3G module then transmits data to the Data Acquisition Server Interfaced with Data Logger PC.
A Meter Interface Unit (MIU) is connected to Electronic Energy Meters and enables wireless transmission of data from meters to DCUs. It eliminates conventional cabling requirements between meters and DCUs, thereby ensuring a quantum jump and data integrity of the system.
A DCU is usually installed in a sub-station. It is an intelligent device with built-in LPR modules to acquire data from Electronic Energy Meters or MIUs using AMR Software. Its’ in-built 2G 3G module then transmits data to the Data Acquisition Server Interfaced with Data Logger PC.
A Meter Interface Unit (MIU) is connected to Electronic Energy Meters and enables wireless transmission of data from meters to DCUs. It eliminates conventional cabling requirements between meters and DCUs, thereby ensuring a quantum jump and data integrity of the system.
1-RS232 1-USB Device Bluetooth 4.0Operating temperature: 0°C to 50°C Storage temperature: -20°C to 70°C Humidity: 5 – 95% (Non Cond
PrinterPrinting method: Direct thermo sensitive method Paper Width: 72 mm Dot Structure (resolution): 576
Bluetooth thermal printer uses heat and a special coated paper for printing, thus eliminating the need of recursive replacement of ribbon ink. It is compatible with any Android device via BluetoothUSB it is user programmable comes with optional peripherals like contact contactless reader (or both), optional GSM GPRS communication modules, finger print scanner and PCI PED certified Pin pad. It works for more than 10 hours with internal battery.
Bluetooth thermal printer uses heat and a special coated paper for printing, thus eliminating the need of recursive replacement of ribbon ink. It is compatible with any Android device via BluetoothUSB it is user programmable comes with optional peripherals like contact contactless reader (or both), optional GSM GPRS communication modules, finger print scanner and PCI PED certified Pin pad. It works for more than 10 hours with internal battery.
EnvironmentalOperating temperature: 0°C to 50°C Storage temperature: -20°C to 70°C Humidity: 5 – 95% (Non Cond
DimensionsHeight: 130 mm Width: 106 mm Depth: 46 mm Weight: 300 gms
PrinterPrinting method: Direct thermo sensitive method Paper Width: 58 mm Dot Structure (resolution): 384
Bluetooth thermal printer uses heat and a special coated paper for printing, thus eliminating the need of recursive replacement of ribbon ink. It is compatible with any Android device via BluetoothUSB and Windows desktop via USB. It is user programmable and comes with optional peripherals like contact contactless reader (or both), optional GSM GPRS communication modules, finger print scanner and PCI PED certified Pin pad. It works for more than 10 hours with internal battery.
Bluetooth thermal printer uses heat and a special coated paper for printing, thus eliminating the need of recursive replacement of ribbon ink. It is compatible with any Android device via BluetoothUSB and Windows desktop via USB. It is user programmable and comes with optional peripherals like contact contactless reader (or both), optional GSM GPRS communication modules, finger print scanner and PCI PED certified Pin pad. It works for more than 10 hours with internal battery.
PowerBuilt in 2200mAh battery 12V@1A External Adapter
Communication1-RS232 1-USB Bluetooth 4.0
SoftwareAndroid SDK
EnvironmentalOperating temperature: 0°C to 50°C Storage temperature: -20°C to 70°C Humidity: 5 – 95% (Non Conde
DimensionsHeight: 220 mm Width: 102 mm Depth: 52 mm Weight: 800 gms
PrinterPrinting method: Impact with ribbon cassette Paper Width: 57 mm Dot Structure (resolution): 144 do
Bluetooth Impact printer is ideal for long-term duration of receiptsdocuments due to ink mechanism. It is compatible with any Andoroid device via BluetoothUSB and Windows desktop via USB. It is user programmable and comes with optional peripherals like contact contactless card reader (or both), GSMGPRS communication modules, finger print scanner and PCI PED certified pin pad. It works for more than 10 hours with internal battery
Bluetooth Impact printer is ideal for long-term duration of receiptsdocuments due to ink mechanism. It is compatible with any Andoroid device via BluetoothUSB and Windows desktop via USB. It is user programmable and comes with optional peripherals like contact contactless card reader (or both), GSMGPRS communication modules, finger print scanner and PCI PED certified pin pad. It works for more than 10 hours with internal battery
Power : Built in 2200mAh battery 12V@1A External Adapter
Communication Ports1-RS232 1-USB host 1-USB device 1-Weigan in 1-Weigand out
Display3.5" QVGA TFT with Touch panel
Camera3MP/ 5MP Auto focus camera
Fingerprint capacity50000 templates
Fingerprint scannerMulti-spectral Venus finger print scanner 500DPI resolution 0.7” x 1.1” inch platen size
Access control InterfaceElectric lock, door sensor, exit button, alarm, door bell
Environmental RatingIP 65
OutputISO19794-2 (template)
Image Type8 Bits, 256 levels
Operating Humidity0 – 100% Condensing
The Bio Watch Lumidigm, with its fastest fingerprint-matching algorithm and multispectral sensor technology, maintains its performance in almost any environment. It eliminates performance problems associated with conventional fingerprint sensors. The scanner protects against fake and spoof fingerprints by capturing detailed surface and deep tissue data. Lumidigmâs sensor multispectral technology can capture fingerprints in any weather condition like rain, snow, cold, dry, dust or hot. High-quality images are captured by multispectral sensor even when fingerprint ridges are hard to distinguish due to genetics, age, dirt, finger placement or environmental conditions.
The Bio Watch Lumidigm, with its fastest fingerprint-matching algorithm and multispectral sensor technology, maintains its performance in almost any environment. It eliminates performance problems associated with conventional fingerprint sensors. The scanner protects against fake and spoof fingerprints by capturing detailed surface and deep tissue data. Lumidigmâs sensor multispectral technology can capture fingerprints in any weather condition like rain, snow, cold, dry, dust or hot. High-quality images are captured by multispectral sensor even when fingerprint ridges are hard to distinguish due to genetics, age, dirt, finger placement or environmental conditions.
Operating TemperatureStorage -20°C to 70°C Operating 0°C to 55°C
ProcessorARM
Memory4MB Non-volatile data memory
Maximum Output power2W for GSM 900 MHz. 1W for GSM 1800 MHz.
Input Voltage80 – 300 V AC (110 / 230 V ± 30%)
SIM Interface3V / 5V
GPRS Data Rate38.4 Kbps max (depends on service provider)
38.4 Kbps max (depends on service provider)120 KB
120 KB141 x 83 x 33 mm
An advanced meter reading device which automatically collects data from Electronic Energy Meters using optical port and transfers the acquired data to the server with its in-built 2G 3G communication technologies. It is compact, easy to install in existing meter boxes and can be remotely configured or programmed.
An advanced meter reading device which automatically collects data from Electronic Energy Meters using optical port and transfers the acquired data to the server with its in-built 2G 3G communication technologies. It is compact, easy to install in existing meter boxes and can be remotely configured or programmed.
Operating Temperature : Storage -20°C to 70°C Operating 0°C to 55°C
Reviews & Ratings
Write a Review
Post Free Ad
