Prime Water Systems Hyderabad, Telangana

The process of removing divalent cat ions, usually calcium or magnesium, from water. When a sample of water contains more than 120 mg of these ions per liter, expressed in terms of calcium carbonate (CaCO3), it is generally classified as a hard water. Hard waters are frequently unsuitable for many industrial and domestic purposes because of their soap-destroying power and tendency to form scale in equipment such as boilers, pipelines, and engine jackets. Therefore it is necessary to treat the water either to remove or to alter the constituents for it to be fit for the proposed use. Water described as "hard" is high in dissolved minerals, specifically calcium and magnesium. Hard water is not a health risk, but a nuisance because of mineral buildup on fixtures and poor soap and/or detergent performance. Fiber Glass Reinforced Plastic (FGRP) composite vessels are 1/3 the weight of carbon steel, strengths are directly comparable to steel, no maintenance & high aesthetic appearance.     High performance Composite material    Thermoplastic liner of polyester – wall thickness 3.8 mm to 7.6 mm as per vessel diameter     100 % corrosion resistant     Excellent bonding between inlet & PE liner    Better curing at high temperature     200 mm to 1,000 mm diameter     All are top opening & dia 450 mm onwards top & bottom opening     450 mm onward flange fitting    Operating Pressure – 10.5 kgf/cm2     Operating temperature – 49°C     250,000 times cycle test from 10 psi to 150 psi     Vessels are NSF & PED certified

Cartridge filtration units generally operate most effectively and economically on applications having contamination levels of less than 50 – 80 ppm. For heavier contamination applications, cartridges are normally used as final polishing filters. In the following the basic systems of cartridge filters are listed Wound cartridge filters:     the most common type of depth filters     materials: natural or synthetic yards, which are wounded around a central tube or former     numerous applications in the industry Bonded cartridge filters:     One-piece cordless construction, consisting of resin bonded fibers of solid particles     Their filtration range is between 5 to 125 micron, good chemical compatibility/flow rate     Frequent application: viscous fluids, process duties Pleated cartridge filters:     today's most common cartridge filter system     materials: cellulose basis, resin impregnation; polyester, micro fiber glass, polypropylene     advantages: increased surface area (up to 60 %) compared to traditional cartridge filters Metal fiber cartridge filters:     material: stainless steel fibers, connected to a mat     used in the polymer industry Hollow fiber membrane cartridge filters:     for applications under 0.5 micron, for example used for the removal of aerosols.     Further applications can be, for example microbiology (filtration range down to 0.01 micron), where sterility is very important     materials: hydrophilic polyamide/polypropylene Applications:     Pre RO water     Chemicals     Beverages     Solvents    Compressed air     Cosmetics     Alcohol

Our Industrial RO plants start from 2000 LPH onwards. All our Industrial Reverse Osmosis (RO) Plants are carefully customized and configured to suit the individual’s requirement, which varies from normal drinking application to specific usage, such as food processing, pharmaceuticals and boiler feeding requirement We Use high quality Stainless Steel for quality product output. Water produced using Reverse Osmosis Technology is of low TDS and free from particulate, Organic and Collidal matter   Our FRP models are designed to suit our customers budgets. Unlike SS plants these plants are very economical and as effective as SS industrial RO plants. Considering the important aspects of the RO plants stainless Steel is maintained at the required locations of the plant including RO membrane housing and pipings after the Micron filters.

Our organization is renowned in offering UV Systems to our clients. These systems are offered in best range with customization also offered on our range. These systems are able to give excellent performance for years and are reckoned for their inbuilt protection system. These systems are developed at state of art manufacturing unit and are completely compatible as well. Advanced tools and technologies have been used in construction of entire range. UV supplies, installs and services a wide variety of ultraviolet disinfection systems (UV systems), ultraviolet lamps (UV lamps, UV tubes, UV lights, Germicidal Lamps), Quartz Tubes, Quartz Sleeves, UV Intensity Sensors, UV Monitos, Electronic Ballasts, O Rings and Spare parts for UV systems. We provide ultra-Violet disinfection systems for treatment of: Drinking Water Soft Drinks & Bottled Water Sugar Syrup Swimming Pools Air Aquaculture Brewing Ultra Pure Process Water Removal of Chlorine

Demineralization is the process of removing mineral salts from water by using the ion exchange process. Demineralised water is water completely free (or almost) of dissolved minerals as a result of one of the following processes :     Distillation     Deionization     Membrane filtration (reverse osmosis or nanofiltration)     Electrodyalisis     Or other technologies. Demineralization ( DM ) Water Treatment Plants Demineralized water also known as Deionized water, water that has had its mineral ions removed. Mineral ions such as cations of sodium, calcium, iron, copper, etc and anions such as chloride, sulphate, nitrate, etc are common ions present in water. Deionization is a physical process which uses specially-manufactured ion exchange resins which provides ion exchange site for the replacement of the mineral salts in water with water forming H+ and OH- ions. Because the majority of water impurities are dissolved salts, deionization produces a high purity water that is generally similar to distilled water, and this process is quick and without scale buildup. De-mineralization technology is the proven process for treatment of water. A DM Water System produces mineral free water by operating on the principles of ion exchange, Degasification, and polishing. Demineralized Water System finds wide application in the field of steam, power, process, and cooling. The water free from any mineral is called De- Mineralised Water (D.M.Water). Naturally occurring water has various salts in dilute form which are called dissolved solids (TDS) . When the water having such mineral is required to be free from this, it is to be treated in Ion Exchange Resins column (H form) which adsorbs the positively charge ion. Now the cations free passed through Anion Resin Column (OH form) which adsorbs the negatively charged anions and water free from the total ions shall comes out from the system.     Mini DM Plant Specifications :    Model: eDM-5    Flow rate: 50 to 80 Lit/hr.    Space requirement: very compact- 1 m x 1m    Power: NIL, Min inlet pressure 0.5 kg/cm2    Output TDS: Less that 10 ppm    Output DM Qty.: 500 Lit at 100 ppm TDS (Best suitable when feed water is corporation water TDS < 100 ppm)

Due to the breadth of the facilities we manage throughout the world, and our specific position as both a manufacturer and an operator, we can help water treatment plant operators to achieve their objectives in terms of productivity improvement thanks to our framework agreements to obtain the best price and to facilitate better management through a single service provider. We provide all the spare parts needed for the smooth running of water treatment plants, whether or not they were built by us:     Production of drinking water (well water, surface water)    Desalination (brackish water, sea water)    Urban wastewater treatment Urban wastewater reuse     Sludge recovery and treatment units     Odour control facilities     Primary hydraulic networks General Spares for W.T.P     Reagent feeder Lime, etc.     Air blower for filtering, mixing and washing    Valves – all types, automatic or pneumatic     Piping and couplings: GRP, fibreglass, PVC, steels    Flowmeters: ultrasound, electromagnetic     Instrumentation     Chemical reagent metering pump, diaphragm metering pump     Peristaltic pump, centrifuge pump     Wash water pump, booster pump Spare Water For Drinking Water Treatment Plants on Pulsator, Pulsatube, Turbocirculator, Aquazur V and T processes     Pre-treatment: grates    Settling/Clarification: Pulsator, Turbo Circulator    Pulse surge tube (fiberglass)    Deflector plate (fiberglass)     Float contractor (for pulses)    Lamellar modules (unit measuring 1 x 1 x 0.65 m)    GRP piping (Distribution & Collecting trough)    Fan Circulator bridge    Nozzles – D13 & D20 + Washers & Nuts    Partialization valve – DE 25 & DE 40    Siphon    Valve (Filter Feed – Fiberglass)    Filter sand – Various grades    Filter floor mould (for Degrémont Standard sizes)    Degrémont head loss gauge (160 diam. Dial)     Disinfection     Metering pumps    Chlorinator     Gas masks & related equipment