Davesmen India Pvt Ltd South Tukoganj, Indore, Madhya Pradesh

A Tyre Protection Chain is a close mesh of high-alloy, drop-forged, steel, wear links which wraps around the tyre to protect the tread and sidewalls. The flexible nature of the mesh enables the chain to adjust to the tyre as it deforms during the loading or hauling operation. The chain’s highly-efficient, self-cleaning properties prevents the mesh from becoming filled and clogged thus achieving the best possible traction and increasing the loader’s productivity. Through 70 years of development in co-operation with owners and operators of wheeled loaders and dump trucks, together with on-going investment in state-of the-art production facilities and quality control labs in Europe and South America, we have achieved pre-eminence in the tyre protection chain market with a wide range of chains designed to match the challenges of a multiplicity of site conditions. By protecting tyres from excessive abrasion, punctures and sidewall damage, our Tyre Protection Chains saves thousands of dollars in tyre replacement costs and assures full loader productivity. For your confidence, our experts will be on hand from your initial enquiry, through delivery and installation, routine check-ups and on-call 24/7 for the life of your tyre protection chain. At some sites, where the terrain is slippery because of mud or where trucks have to contend with icy haul roads, poor traction can be a major problem.Wrestling to control a loaded truck with a rend of its own is exhausting for the operator. can reduce concentration and risks “losing’ the truck with all the collateral damage that may invoke. Where the tyre tread. atone. cannot provide an adequate grip. Our traction chains in protection plus traction.

The Tire Pressure Monitoring System (TMPS) is an electronic system in your vehicle that monitors your tire air pressure and alerts you when it falls dangerously low. TPMS notifies you when your vehicle’s tire pressure is low or is going flat. By helping you maintain proper tire pressure, TPMS can increase your safety by improving your vehicle’s handling, decreasing tire wear, reducing braking distance and bettering fuel economy.  

Sensor Transmit Range Approx. 300 feet (Line-of-Sight) Operating Frequency 433.92 MHz FM Operating Temperature Range -40°C / -40F to +150°C / 302F Sensor Weight 2/3 oz. or 17 grams Sensor Dimensions 1.01″ H x 1.11″ Dia. Sensor Batteries Internal, non-rechargeable Sensor Pressure Range 8 to 299 PSI 55 to 1999 kPa 1 to 20.3 BAR Sensor Low Voltage Shutdown 2.2 Volts Accuracy +/- 3% range up to 120 PSI, +/- 5% from 120 PSI up Installation Screws onto regular valve stem

Fully encapsulated GREEN LED warning light Shows if seatbelt is being used Flashing LED s Dual Voltage 12-24V CE and EMC approved Epoxy sealed Off Highway use only

Features Effectively detects stationary, moving and multiple objects Programmable to calibrate out fixed objects, bodywork and attachments Effective through non-metallic objects (i.e. plastic or glass fibre bodywork) 2 output triggers to activate other safety devices Multiple sensors can be networked together for maximum danger zone coverage Self-diagnostic function Graduated audible and visual distance warning display old, mud and glare     Specifications 12-24 Volts Programmable detection range up to 10m Rugged design for harsh environmental conditions Size (WxHxD) 187 x 192 x 61mm 2 year warranty   PowerCurrent: 0.2 Amps   Durability & Standards Operating temperature: -40 to +85°C Resistant to water, moisture, dust, vibration, heat, cold, mud and glare

Sensor Transmit Range Approx. 300 feet line-of-sight Operating Frequency 433.92 MHz FM Monitor Power Requirements 12VDC; 125 mA in standby,

By recording footage from vehicle mounted cameras, mobile digital recording provides an accurate witness, giving irrefutable evidence in the case of false claims, crash for cash incidents or vandalism. Disapproving these claims means companies can make major cost savings, whilst importantly supporting their drivers, who are often the subject of increased scrutiny. False claim prevention Protection for drivers who may be wrongly accused Provides irrefutable evidence in the case of accidents and legal proceedings Useful in reducing shrinkage and catching perpetrators Driver training and best practice Peace of mind for passengers and drivers

The PDTS display is a high quality low cost display unit for displaying angle in both X and Y axis (pitch and roll) to the operator. It can interface with many of our inclinometer sensors depending on the requirements for the application. The high contrast LED display is viewable in low light and direct sunlight, and the LED brightness is adjustable. It is designed to be panel mounted and is supplied with a sealing gasket and hardware for mounting on plates between 1mm and 10mm thick. As well as displaying angle it also has a built in tilt switch functionality. The two on board relays can be configured to operate when a certain angle is exceeded in the X or Y axis (or both), in either the positive or negative direction (or both). It is highly configurable with adjustable threshold, hysteresis and delay. There is a USB interface to allow the angle to be monitored or logged on a PC. The devices can be factory configured for OEM applications, or user configured using the simple Windows based configuration application supplied free of charge with this product. When connected the USB interface will supply power to the display and sensor. DC Power is supplied to the display, which in turn will provide power to the sensor, simplifying the wiring requirements. Connection is via spring release terminal block for simple and secure wiring.

Features 6 Infrared LEDs for ultra-low light performance 5m illumination distance Shutter, Heater, Audio Day / Night sensor Mirror / Normal view 1/3″ Sony CCD TV System: PAL TV Lines: 400   PowerPower consumption: 5 WattsCurrent: 0.4 Amps   Durability & Standards Mechanical vibration: 10G Mechanical shock: 100G Operating temperature: – to +80°C CE marked EMC approved: E   Specifications IViewing angle (HxVxD) 103 x 71 x 134 IPX9K Size (WxHxD) 123 x 85.5 x 80.4mm 3 year warranty    

When driving two hours at a speed of 100km/h, the driver has to struggle to stay awake on account of his lower levels physiological functions followed by inattention. In general, accidents rates are extremely high when the driver drives over 6 hours a day or is lack of proper rest (less than 4 or 5 hours ) According traffic accidents analysis from Europe and USA, 80-90% was caused by human factors. In USA, about 100,000 traffic accidents were caused because of fatigue or drowsy driving every year, which leads to 1500people die, Similar situation in Europe? take Germany as an example, 25% of traffic accidents were caused by fatigue or drowsy driving. Product Information DMI DDS works based on Advanced Face Recognition and Pupils Detection technology, detects drivers drowsy status, stores drowsy image and give outs alarm and reminding signals. It can help prevent drowsy driving and lower traffic accidents rate.

Features 9 LEDs for ultra-low light performance 8m illumination distance Mirror view 1/3″ Sharp CCD TV System: PAL TV Lines: 420     Specifications Viewing angle (HxVxD) 88 x 64 x 112° IP67 Size (Diameter x Length) 35 x 50mm 2 year warranty     PowerPower consumption: 2.3 WattsCurrent: 0.2 Amps   Durability & Standards Mechanical vibration: 10G Operating Temperature: – 20 to +70°C CE marked

The Nordic CENTAURUS LED work lamp delivers stunning illumination and is equipped with the revolutionizing QUAKE dampening system. The new QUAKE dampening system takes protection against vibration and shock to a whole new level never seen before. The work lamp meets the expectations of the most demanding situation.   Features: Long Lifetime Low Maintenance Waterproof Heavy Duty Construction Reverse Voltage Protected EMC Load Dump Protected Over Voltage Protected Overheat Protected Salt Mist Optically Even Light  Distribution Distinct Light Pattern Different Lens Colour Versions Available Replaceable Lens High Light  Output High Lumens / Watt Efficiency Quake Dampening Extreme Heavy Duty Dampening   Specifications: Theoretical Lumens Output: 115001m Operational Lumens Output: 72001m Colour Temperature: 5700K Nominal / Input Voltage DC: 24V 1832V Power Consumption: 85W Nominal Current at: 24V 3.5A Electronics: Integrated Connector: Built•in Deutsch 2•pin Mount: Single Bolt M10 Shock: 60G Vibration: 15.3Grms 24.2000Hz, 4.65Grms 12-2000Hz Lens: PC Body: Aluminum Weight: 2.5kg IP Rating: Ip68 IP6K9K Salt Mist: SAE J1455 EMC: ISO 9227 240H, CISPR 25 Class 3, ISO 13766, ISO 14982, ISO 7637-2 Overheat Operating Temperatures: protected Packing: 6 pce / Box

Rated voltage : 12 volt/ 24 volt Rated device current 100 mAMP/ 60 AMP Current Switching cap 20 Amp. (240tt bulbs at 12 volt and 480 watt bulbs at 24 volt) Manual override for High to Low beam shift. other = 0.9 sec. (AS per SAEJ565 standard it is permitted up to 2 second) Dipping distance adjustable as per SAE J565. Light sensitivity 1 lux (approx)