Khandela Electronika Gulmohar Colony, Indore, Madhya Pradesh

Fully automatic operation Highest ration measurement (45,000:1); Highest accuracy (0.1%) Measures all power transformers, PTs and CTs Built-in storage and downloading capabilities

Soldering Stations from the World Leader. Weller® brings you an extensive line of soldering stations to meet the needs of today’s industrial marketplace. From simple soldering tasks to demanding production applications. Weller® has the solution for your needs.

The Weller® soldering Irons Feature High precision and very fast heat up time. The ergonomic design and high performance of Soldering irons allow fine soldering jobs. As well as heavy duty tasks. A wide range of soldering tips makes them versatile for any job.

Insulation (25, 50, 100, 250, 500, 1000 V DC) Withstand voltage (AC/DC 0-5000V, 500VA) Leakage current Test (AC / DC MAX 25mA) Earth Grounding Test (0 to 1.800 Ohm, 31A) Full remote operation (Software 9267) Interface : RS-232C, GP-IB

Consists of ‘Power Box’, unique TouchView Interface and AVTS software. Ultra flexible output design provides up to four phase voltage and current or eight phase current. NEW constant power output capability

Output current up to 2000A Constant current output (current level maintained throughout the test) Built-in timer to record protection relay operation

1P2W / 1P3W / 3P3W / 3P4W Voltage, Current, Active Power Power Factor, Frequency, integration Available Input : 1, 2, 3, 4, 5, 6CH High-speed harmonic analysis MAX 100th Advanced motor analysis functions Wave & Noise analysis function for inverters Interface : LAN, USB, CF, RS-232C, GP-IB

Suparule has developed a conductor-mounted indicator for the detection and indication of both earth faults and phase-to-phase (short circuit) faults on overhead medium voltage distribution lines

Open loop current sensors measure DC and AC currents and provide electrical isolation between the circuit being measured and the output of the sensor. Typically, open loop current sensors cost less than closed loop sensors. They are preferred in battery powered circuits due to their low operating power requirements. Small Package Low Cost High performance Low power consumption

Recorders, Memory Recorders: Available Input 2, 4, 8, 16, 32CH Voltage, Current, Temperature(64/128CH) FFT, Strain, F/V, Charge, DC-RMS

Interface : LAN, USB, CF, RS-232C, GP-IB

NT SeriesUnique magnetoresistive effect technology allows for the compact design that can be mounted directly to the PC board.CMR-25 SeriesThe CMR-25 current sensor builds on patented company technology to offer superior sensor performance and accuracy in current measurement applications.CDS SeriesThe introduction of the CDS product with its low profile and high performance features creates significant benefits for those who choose to apply it.

Karl Fischer Test Set (moisture content in oil testing) Tests/titrates sample with specific gravity from 0.60 to 1.40 Results in µg, ppm, % Uses any commercially available reagents In-built printer

Insulation Resistance Tester up to 1000 V Selectable test voltage: 250V, 500V and 1000V. Resistance measuring range up to 999MΩ Tough rubber armored case and self contained protective cover Live circuit warning Intelligent safety system for protection Weatherproof to IP54

Infrared Thermo Tester-35.0 to 500 °C, 0.1 c resolutionNon-content MeasurementQuick and Easy Temperature management Temperature TesterK type thermocouple,( Chromel/Alumel)Measurement range:-100 °C to 1300 °C

The line of industrial sensors offered by F.W. Bell covers a wide variety of features. 4-20mA output levels or unidirectional voltage output Available for AC or DC measurement Connect without breaking the circuit Panel mounted Fully adjustable ranges

LCR Meter/Impedance Analyzer: Frequency : DC to 120 MHz |Z|, |Y|, Θ, Rp, Rs(ESR), G, X, B Lp, Ls, Cp, Cs, D (tan δ) , Q High speed measurement 0.5ms (100kHz) High precision measurement : ±0.08% Impedance Analyzer Function Interface : LAN, USB, CF, RS-232C, GP-IB

The advanced technology of Weller hot air stations ensures greater controlled precision when soldering and desoldering sensitive SMD components.Medium to large SMD components are extremely susceptible to thermal and physical damage.Weller hot air nozzles, with in-built hot plate, provide gentle preheat contact to the component followed by a controlled hot air flow being directed to the leads of the component. An in-built vacuum pick-up within the nozzle makes the removal and replacement of the component safe and easy without damaging the circuit board pads or component leads. When using the WHA 300 for the removal and placement of large SMD components, a vacuum tweezer is required.

High voltage Insulation TesterTest voltage 5KV/2.5KV/1KV/500V/250VMeasurement insulation range, up to 5 TΩDiagnose the insulation of various equipmentBuilt-in memory for data storage Insulation Tester (50v/125v/500v/1000v)Measurement insulation range, Up to 4000 M Ω

Hall Effect sensors are a type of semi-conductor that produces a linear voltage output in relation to magnetic field intensity when a constant current is applied to the sensor. Hall Effect sensors are popular in industry for such purposes as sensing rotors of brushless motors and in other applications where contactless sensing of moving mechanical components is required. Hall Effect sensors are immune to environmental conditions that easily effect electro-mechanical type sensors that they replace. Hall Effect sensors are also utilized in FW Bell contactless current sensors. FW Bell produces a complete line of Hall Generators for almost any application. We produce in house thin film Indium Arsenide Hall Effect sensors that are especially sought after for small size, high reliability applications. In addition to these we offer instrument quality, high linearity sensors for demanding applications. Also, we offer several general purpose low cost sensors for those applications that do not require high accuracy. FW Bell will also custom design and manufacture Hall Effect sensors to meet our customers specifications. Our client list includes the leading suppliers to the aerospace, medical, automotive, instrumentation, research, alternative energy, and industrial fields.

7000 Series Gauss Meters Bright 1/4-VGA readout Fully menu-driven for easy operation Large electroluminescent graphic display Auto Zero and Auto Calibration Over 100 standard probes available

In response to the growing awareness of the dangers, of fumes, in today’s production environment Weller® offers a complete line of fume extraction systems. These systems can be integrated into your current production environment to give you safe and efficient removal of noxious fumes.

G4400 BLACKBOX Fixed Power Quality Analyzer The revolutionary Elspec G4000 BLACKBOX is the next generation in power quality analyzers. The G4K provides accurate detection and isolation of power quality monitoring for effective preventive maintenance.No Triggers/No Thresholds meaning no missed events. The G4k records all network parameters for up to a year.

  The Equalizer RT, a transient free static compensation system, modified in order to boost supplied kVAr capacity for short time voltage dips applications. The Equalizer RT is designed to deliver substantial reactive power even during a very deep voltage sag

LUX HiTESTERRange: 20 to 200,000 Lx, 5 ranges SOUND LEVEL METERSimple operation : 30dB to 130dBAC/DC Anlog Output (For Trend and FFT) TACHO HiTESTERr / min: up to 99990 MAX, 4 rangesAnlog Output (For Trend Recording)