Ktpl Provides USB232 smart adapter cable lets PC Users add an additional serial port for RS-232 connections using USB It. Provides an external plug-and-play port for convenient connection of cell phones, digital cameras, modems and ISDN terminals. Just plug the serial device into the cable and the cable into the USB port. Automatic handshake is supported. No IRQs are required.This smart cable transmits up to 230 kbps with a 96 byte buffer for upstream and downstream data flow.
General Information
Key features:
·Small volume, Easy installation
·No power supply needed, plug and play
·Automatic detective serial signal rate
·Inbuilt battery charger
·Single chip[ASIC] USB port to serial port communication
·Accord USB1.1 or 2.0, EIA RS232 standard
·USB full-speed to 12Mbps
·In-house manufacture
Ktpl Provides USB232 smart adapter cable lets PC Users add an additional serial port for RS-232 connections using USB It. Provides an external plug-and-play port for convenient connection of cell phones, digital cameras, modems and ISDN terminals. Just plug the serial device into the cable and the cable into the USB port. Automatic handshake is supported. No IRQs are required.This smart cable transmits up to 230 kbps with a 96 byte buffer for upstream and downstream data flow.
General Information
Key features:
·Small volume, Easy installation
·No power supply needed, plug and play
·Automatic detective serial signal rate
·Inbuilt battery charger
·Single chip[ASIC] USB port to serial port communication
·Accord USB1.1 or 2.0, EIA RS232 standard
·USB full-speed to 12Mbps
·In-house manufacture
Ktpl Manufactures a faster, more accurate, and easy to operate milk stirrer that increases work performance and productivity of milk collection. Its function is to stir the milk sample and remove air bubbles from the sample to get a perfect reading. It is especially suitable for dusty and humid environment. It is manufactured using quality material and considered ideal for quality control at the milk collection spot. Our range is well known for its long working life, accurate result, smooth operations and low maintenance. Being customer friendly, we offer our range at industry leading prices.
Key Features
Easy to Operate
A/c and DC [12V] Operate
Table top Type
Less Maintenance SS Ball Toll
Compact Weight & Size
Remove air from fresh milk
General Information
Electrical Parameters
AC Power Supply voltage – 240V/110V 50-60Hz
DC Power Supply voltage – 12-14V Dc
Note:- A full charged 42 AH battery will last for at last 8 hour operation
Environmental Conditions
Ambient air temperature — 10°C –40°C (option 43°C)
Relative humidity — 30% – 80%
Mechanical Parameters
Dimensions (Wx L x H) 11x10x21CM
Weight < 2 kg Approx Body MS with powder Coated
Spare Parts Kit Battery Cable, Adapter,
Specifications
Capacity=180 Sample & More per hour (Approx)
Sample Volume=50 ML/Test
Stirrer Timer=Adjustable 7 Sec. - 15 Sec.
Working Principal=Ultra Sonic of Adjustable Frequency
Milk before testing=Remove air from Fresh Raw milk
Housing=Vibrating Part Nikl Coated
Accuracy=98%
Ultra Sonic Measurement of 10 KHz to 20 KHz frequency by the electromagnetic present in the sample
Power Consumption 60W max
Ktpl Manufactures a faster, more accurate, and easy to operate milk stirrer that increases work performance and productivity of milk collection. Its function is to stir the milk sample and remove air bubbles from the sample to get a perfect reading. It is especially suitable for dusty and humid environment. It is manufactured using quality material and considered ideal for quality control at the milk collection spot. Our range is well known for its long working life, accurate result, smooth operations and low maintenance. Being customer friendly, we offer our range at industry leading prices.
Key Features
Easy to Operate
A/c and DC [12V] Operate
Table top Type
Less Maintenance SS Ball Toll
Compact Weight & Size
Remove air from fresh milk
General Information
Electrical Parameters
AC Power Supply voltage – 240V/110V 50-60Hz
DC Power Supply voltage – 12-14V Dc
Note:- A full charged 42 AH battery will last for at last 8 hour operation
Environmental Conditions
Ambient air temperature — 10°C –40°C (option 43°C)
Relative humidity — 30% – 80%
Mechanical Parameters
Dimensions (Wx L x H) 11x10x21CM
Weight < 2 kg Approx Body MS with powder Coated
Spare Parts Kit Battery Cable, Adapter,
Specifications
Capacity=180 Sample & More per hour (Approx)
Sample Volume=50 ML/Test
Stirrer Timer=Adjustable 7 Sec. - 15 Sec.
Working Principal=Ultra Sonic of Adjustable Frequency
Milk before testing=Remove air from Fresh Raw milk
Housing=Vibrating Part Nikl Coated
Accuracy=98%
Ultra Sonic Measurement of 10 KHz to 20 KHz frequency by the electromagnetic present in the sample
Power Consumption 60W max
Ktpl are in field of manufacture for the past 17 years. The business of Power Conditioning Equipment The key advantage of full-digital control for UPS systems is that all power conversion is handled by MCU, thus fewer total components are required comparing to a traditional analog system. This reduces overall cost and provides a more stable method of control.
UPS applications require a high-speed control MCU with multiple on-chip inverter and converter PWM control functions thus making the UPS an ideal choice for continuous commercial power supplies
Key Features
Pioneer in UPS Design & Manufacturer for past 17 Years
Fully Digital UPS
Extended Battery life
Highly Reliable & Rugged Product
Maximum Battery saving
Battery Recharge even at very low Input voltage
Operate on wild Input Voltage
Overload, Battery Low, Short circuit, Ac Low & High Protection
General Information
Environmental Conditions
Ambient air Temperature 5-50 degree C
Humidity 50% to 90%
Electrical Parameters
AC: 160-260V Operate
DC: 12V Operate 750VA
A full charged 150AH battery will last for at least 3 hour operation.
Mechanical Parameters
Dimension (H x W x D)
Weight (without diluents)
TECHINICAL SPECIFICATIONS
750va UPS 750VA OFF-LINE PURE SINE WAVE UPS
MOSFET based, Pure Sine Wave, CVCF, with a CVCC Charger & with the following
specifications.
INPUT Input voltage window-160V To 270V
Input Frequency-50Hz +/- 1%
OUT PUT Output Voltage On Back up mode -230+/-2%
Output Voltage on Mains mode – 220+/-8%
Output Frequency battery mode50Hz+/0.1%
Output Wave form- Sine Wave
Output charging cutoff-13.8 V
Output Current for Charging– 2 to 8 Amp
Load Power factor-Unity to 0.7 lagging
GENERAL
Inverter Efficiency->92% Operating
DC Voltage-12V
Transient response:
-maximum Deviation-+/-10%
-Recovery time Within 1Cycle
Noise Level-
Ktpl are in field of manufacture for the past 17 years. The business of Power Conditioning Equipment The key advantage of full-digital control for UPS systems is that all power conversion is handled by MCU, thus fewer total components are required comparing to a traditional analog system. This reduces overall cost and provides a more stable method of control.
UPS applications require a high-speed control MCU with multiple on-chip inverter and converter PWM control functions thus making the UPS an ideal choice for continuous commercial power supplies
Key Features
Pioneer in UPS Design & Manufacturer for past 17 Years
Fully Digital UPS
Extended Battery life
Highly Reliable & Rugged Product
Maximum Battery saving
Battery Recharge even at very low Input voltage
Operate on wild Input Voltage
Overload, Battery Low, Short circuit, Ac Low & High Protection
General Information
Environmental Conditions
Ambient air Temperature 5-50 degree C
Humidity 50% to 90%
Electrical Parameters
AC: 160-260V Operate
DC: 12V Operate 750VA
A full charged 150AH battery will last for at least 3 hour operation.
Mechanical Parameters
Dimension (H x W x D)
Weight (without diluents)
TECHINICAL SPECIFICATIONS
750va UPS 750VA OFF-LINE PURE SINE WAVE UPS
MOSFET based, Pure Sine Wave, CVCF, with a CVCC Charger & with the following
specifications.
INPUT Input voltage window-160V To 270V
Input Frequency-50Hz +/- 1%
OUT PUT Output Voltage On Back up mode -230+/-2%
Output Voltage on Mains mode – 220+/-8%
Output Frequency battery mode50Hz+/0.1%
Output Wave form- Sine Wave
Output charging cutoff-13.8 V
Output Current for Charging– 2 to 8 Amp
Load Power factor-Unity to 0.7 lagging
GENERAL
Inverter Efficiency->92% Operating
DC Voltage-12V
Transient response:
-maximum Deviation-+/-10%
-Recovery time Within 1Cycle
Noise Level-
Our Company is involved in Offering of high quality Data processor, which is Manufactured by Superior quality basic material and Advanced Technology in order to Ensure their quality and Efficient performance. These are widely reckoned for their high performance, longer service life and rust resistance. Further, our clients can avail these at highly economical prices. KTPL has developed a unique Data Processor – SUPPER DTP - It's offers versatile utility actions to simplify the milk purchase and payment process, with accuracy and transparency.
Key features:
Easy to Install & Operate.
20x4, bright LCD display.
Maintenance - Easy and Minimum
12 volt battery can be used to operate
In-house Manufacture
Internal & external weighing Support
GSM facility.
More type Milk analyzer Support
DMP printer Support
General Information
Environmental Conditions
Ambient air Temperature 5-50 degree C
Humidity 50% to 90%
Electrical Parameters
AC: 140 -260V,(12 V 5 Amp adaptor)
DC: 12V Battery
A full charged 42AH battery will last for at least 2-3 Day’s
Mechanical Parameters
Dimension (L x W x H) 23x20x18 cm
Weight 2 Kg.
Spare Part Kit: - 5Amp Adaptor, RS232 Cable, Thermal Paper Roll, Battery cable
Specification
Environmental Conditions:
Ambient air Temperature 5-50 degree C
Humidity 50% to 90%
Electrical Parameters:
Input: 150V-270V (2Amp AC Adopter)
50Hz-60Hz
12V DC
30W-40W
Mechanical Parameters:
Dimension (H x W x D) (17*21*13) cm
Weight [without diluents] 1.5Kg.
Our Company is involved in Offering of high quality Data processor, which is Manufactured by Superior quality basic material and Advanced Technology in order to Ensure their quality and Efficient performance. These are widely reckoned for their high performance, longer service life and rust resistance. Further, our clients can avail these at highly economical prices. KTPL has developed a unique Data Processor – SUPPER DTP - It's offers versatile utility actions to simplify the milk purchase and payment process, with accuracy and transparency.
Key features:
Easy to Install & Operate.
20x4, bright LCD display.
Maintenance - Easy and Minimum
12 volt battery can be used to operate
In-house Manufacture
Internal & external weighing Support
GSM facility.
More type Milk analyzer Support
DMP printer Support
General Information
Environmental Conditions
Ambient air Temperature 5-50 degree C
Humidity 50% to 90%
Electrical Parameters
AC: 140 -260V,(12 V 5 Amp adaptor)
DC: 12V Battery
A full charged 42AH battery will last for at least 2-3 Day’s
Mechanical Parameters
Dimension (L x W x H) 23x20x18 cm
Weight 2 Kg.
Spare Part Kit: - 5Amp Adaptor, RS232 Cable, Thermal Paper Roll, Battery cable
Specification
Environmental Conditions:
Ambient air Temperature 5-50 degree C
Humidity 50% to 90%
Electrical Parameters:
Input: 150V-270V (2Amp AC Adopter)
50Hz-60Hz
12V DC
30W-40W
Mechanical Parameters:
Dimension (H x W x D) (17*21*13) cm
Weight [without diluents] 1.5Kg.
Electronic Milko Tester
Electronic Milk Tester has been used as an essential and user friendly instrument for the measurement of Milk FAT .It is compact in Design and provided with an inbuilt battery charger & big, Bright LED Display. EMT is a Trouble free and easy maintenance product. Electronic Milk Tester works on the principle of photometric measurement of light scattered by the fat globules present in the milk sample. The measuring procedure follows the conventional system of dilution, mixing, homogenization and photometric measurement.
Key features:
Easy to setup, operate and clean
Big, bright LED display
Single curve calibration
Inbuilt battery charger
Compatible with most computers.
Handles wide range of voltage (fluctuations also)
Maintenance - easy and minimum
In-house manufacture
General Information
Environmental Conditions
Ambient air Temperature 5-50 degree C
Humidity 50% to 90%
Milk temperature 1°C – 45°C
Electrical Parameters
AC: 220-240V,(Max. +10%, Min.-15%)
DC: 12V, 6A (Max 16V, Min.10.5V)
A full charged 120AH battery will last for at least 10 hour operation.
Mechanical Parameters
Dimension (H x W x D) 23 x 31 cm
Weight (without diluents) 16 Kg.
Spare Part Kit :- Mains Moulded Lead ,PVC Inlet Tube ,PVC Outlet Tube, Battery Accessory Cable , Fuse 10 A, Fuse 1Amp,LD Powder Pk, Beaker, Strips, etc in Sufficient Number.
Electronic Milko Tester
Electronic Milk Tester has been used as an essential and user friendly instrument for the measurement of Milk FAT .It is compact in Design and provided with an inbuilt battery charger & big, Bright LED Display. EMT is a Trouble free and easy maintenance product. Electronic Milk Tester works on the principle of photometric measurement of light scattered by the fat globules present in the milk sample. The measuring procedure follows the conventional system of dilution, mixing, homogenization and photometric measurement.
Key features:
Easy to setup, operate and clean
Big, bright LED display
Single curve calibration
Inbuilt battery charger
Compatible with most computers.
Handles wide range of voltage (fluctuations also)
Maintenance - easy and minimum
In-house manufacture
General Information
Environmental Conditions
Ambient air Temperature 5-50 degree C
Humidity 50% to 90%
Milk temperature 1°C – 45°C
Electrical Parameters
AC: 220-240V,(Max. +10%, Min.-15%)
DC: 12V, 6A (Max 16V, Min.10.5V)
A full charged 120AH battery will last for at least 10 hour operation.
Mechanical Parameters
Dimension (H x W x D) 23 x 31 cm
Weight (without diluents) 16 Kg.
Spare Part Kit :- Mains Moulded Lead ,PVC Inlet Tube ,PVC Outlet Tube, Battery Accessory Cable , Fuse 10 A, Fuse 1Amp,LD Powder Pk, Beaker, Strips, etc in Sufficient Number.
Keeping In Mind the Peculiar Requirements Of Milk Collection At Village Level. Data Processor Is A Boon For Small Collection Centers, Where Setting Up A Computer System Is Not Viable. This Are Widely Reckoned for Their High performance, Longer Service Life and Rust Resistance. Further, Our Clients can avail these at Highly Economical Prices. KTPL Has Developed a Unique Data Processor with an objective to benefit the small and medium level milk collection centers. Our systems are equipped with in-built battery to avoid data loss and are operational even during power cuts.
Our DPUs can store and display various information such as weight, FAT & SNF, amount payable, etc. An additional display can be installed to simultaneously display the details of milk collection to the farmer making it transparent and reliable system.
With in-built thermal printer, all the data collected and amount payable can be printed. Reports such as daily milk purchase, payment register can be obtained easily.
Key features:
Easy to Install & Operate.
20x4, bright LCD display.
Maintenance - Easy and Minimum
12 volt battery can be used to operate
In-house Manufacture
Internal & external weighing Support
GSM facility
More type Milk analyzer Support
DMP printer Support
Manual Rate chart Both Cow and Buffalo
General Information
Environmental Conditions
Ambient air Temperature 5-50 degree C
Humidity 50% to 90%
Electrical Parameters
AC: 220-240V, (Max. +10%, Min.-15%)
DC: 12V Battery Operated UNIT
A full charged 42AH battery will last for at least 2-3 Day's operation.
Mechanical Parameters
All Unit Weight Approx 35Kg
Specification
Keeping in mind the peculiar requirements of Milk Collection at Village level, The Data processor Milk Collection System is a boon for small collection Centers, where setting up a computer system is not viable. Please Note The Item Details in Collection System, for more please read the particular product specification
Data Processor
Electronic Milko Tester
Weighing Indicator
400x400 SS Platform [Suitable for one Can]
Keeping In Mind the Peculiar Requirements Of Milk Collection At Village Level. Data Processor Is A Boon For Small Collection Centers, Where Setting Up A Computer System Is Not Viable. This Are Widely Reckoned for Their High performance, Longer Service Life and Rust Resistance. Further, Our Clients can avail these at Highly Economical Prices. KTPL Has Developed a Unique Data Processor with an objective to benefit the small and medium level milk collection centers. Our systems are equipped with in-built battery to avoid data loss and are operational even during power cuts.
Our DPUs can store and display various information such as weight, FAT & SNF, amount payable, etc. An additional display can be installed to simultaneously display the details of milk collection to the farmer making it transparent and reliable system.
With in-built thermal printer, all the data collected and amount payable can be printed. Reports such as daily milk purchase, payment register can be obtained easily.
Key features:
Easy to Install & Operate.
20x4, bright LCD display.
Maintenance - Easy and Minimum
12 volt battery can be used to operate
In-house Manufacture
Internal & external weighing Support
GSM facility
More type Milk analyzer Support
DMP printer Support
Manual Rate chart Both Cow and Buffalo
General Information
Environmental Conditions
Ambient air Temperature 5-50 degree C
Humidity 50% to 90%
Electrical Parameters
AC: 220-240V, (Max. +10%, Min.-15%)
DC: 12V Battery Operated UNIT
A full charged 42AH battery will last for at least 2-3 Day's operation.
Mechanical Parameters
All Unit Weight Approx 35Kg
Specification
Keeping in mind the peculiar requirements of Milk Collection at Village level, The Data processor Milk Collection System is a boon for small collection Centers, where setting up a computer system is not viable. Please Note The Item Details in Collection System, for more please read the particular product specification
Data Processor
Electronic Milko Tester
Weighing Indicator
400x400 SS Platform [Suitable for one Can]
AMCU kT Measures milk Fat, SNF, CLR and water content and calculate the amount to be paid. It also prints the receipts with above details, which are given to the milk producers for the payments. It maintains a database on the computer for producer details like passbook number, date and time of the milk collection, weight of the milk and it’s Fat, SNF, CLR and water content and the amount payable.
AMCU KT ensures full data handshaking among the modules. This provides error free operation with minimum effort and the availability of data, where and when it is required.
AMCU KT is Computer based Automatic Milk Collection Unit. It is comprises of following -
• Computer (Branded HCL)
• AMCU KT Software (Hindi/English)
• Milk Analyzer (Lacto Scan)
• Electronic Weighing Scale (KT Brand 500/1000 kg.)
• Printer (Epson Dot Matrix)
• UPS (1500 VA)
• Battery (120 AH)
• Ultrasonic Milk Stirrer
• Electric Extension Board
Specification
Keeping in mind the peculiar requirements of Milk Collection at Village level, The Automatic Milk Collection Unit is provide milk collecting solutions to Dairy co-operative societies at the village level across the country by understanding the process of all transactional details that take place. This intensive software application provides integration with severals milk testing equipments and weighing instruments, thereby minimizing the time required during milk collection, with minimum user interaction.
Please Note: _ The Item Details in Automatic Milk Collection Unit, for more please read the particular product specification
Desktop Computer Branded
Spiker
Milk Analyzer
Stirrer in SS tool
LQ-300 Epson Printer
Weighing Indicator
600 x 600 SS Platform [Suitable for Two Cans]
Ups 750Va with 150Ah Tubular Battery 2 Year Warranty
AMCU kT Measures milk Fat, SNF, CLR and water content and calculate the amount to be paid. It also prints the receipts with above details, which are given to the milk producers for the payments. It maintains a database on the computer for producer details like passbook number, date and time of the milk collection, weight of the milk and it’s Fat, SNF, CLR and water content and the amount payable.
AMCU KT ensures full data handshaking among the modules. This provides error free operation with minimum effort and the availability of data, where and when it is required.
AMCU KT is Computer based Automatic Milk Collection Unit. It is comprises of following -
• Computer (Branded HCL)
• AMCU KT Software (Hindi/English)
• Milk Analyzer (Lacto Scan)
• Electronic Weighing Scale (KT Brand 500/1000 kg.)
• Printer (Epson Dot Matrix)
• UPS (1500 VA)
• Battery (120 AH)
• Ultrasonic Milk Stirrer
• Electric Extension Board
Specification
Keeping in mind the peculiar requirements of Milk Collection at Village level, The Automatic Milk Collection Unit is provide milk collecting solutions to Dairy co-operative societies at the village level across the country by understanding the process of all transactional details that take place. This intensive software application provides integration with severals milk testing equipments and weighing instruments, thereby minimizing the time required during milk collection, with minimum user interaction.
Please Note: _ The Item Details in Automatic Milk Collection Unit, for more please read the particular product specification
Desktop Computer Branded
Spiker
Milk Analyzer
Stirrer in SS tool
LQ-300 Epson Printer
Weighing Indicator
600 x 600 SS Platform [Suitable for Two Cans]
Ups 750Va with 150Ah Tubular Battery 2 Year Warranty
We are glad to present our latest innovative product which no doubts will revolutionize the milk analysis process in dairy industry, whole laboratory either in private and state farms or in breeding farms as well as in places where milk is accepted and is to be assessed, in milk processing plants and selection stations, veterinary laboratories and milk kitchens. Sample analysis is done without the use of chemical reagents and extra equipment.
We are glad to present our latest innovative product which no doubts will revolutionize the milk analysis process in dairy industry, whole laboratory either in private and state farms or in breeding farms as well as in places where milk is accepted and is to be assessed, in milk processing plants and selection stations, veterinary laboratories and milk kitchens. Sample analysis is done without the use of chemical reagents and extra equipment.
Secondary Business TypeManufacturer / Exporters / Wholesale Suppliers
Opening Hours
SUN : Closed
MON : 9:30 AM - 6:30 PM
TUE : 9:30 AM - 6:30 PM
WED : 9:30 AM - 6:30 PM
THU : 9:30 AM - 6:30 PM
FRI : 9:30 AM - 6:30 PM
SAT : 9:30 AM - 6:30 PM
KTPL Instruments Pvt. Ltd. was founded in year 1997- Keeping in mind to solve the day to day problems in milk dairy equipments and power electronics in case of power failed .This brings an idea to born KTPL. In the year December 2005 KTPL has been awarded ISO 9001-2000 certified by ICS (Accredited by joint Accreditation System of Australia and New Zealand) for manufacturing, marketing and supply of On-Line/Off-Line UPS, INVERTER, STABLIZERS, AMCU EMT and Milk ANALYZER. Our customer base spans over 5000 customer and more than 3000 Milk Collection Units. KTPL operates through its Head office and 4 branches in Rajasthan and 115+ dealers in southern and Northern India in strategic locations all over India. KTPL Dealer Network caters to a wide spectrum of customers ranging from Government, Public Sector Company, corporative sectors & many multinationals. Also KTPL has tied up with more than 300+ agents. This ensures wide distribution channel across the country & high visibility in the market plus. Looking Ahead….. We are constantly identifying opportunities for enriching our range of product and services, incorporating the latest state-of-the-art technology to enhance our customer-need orientation, thereby, seeking to be a vibrant multifaceted digital Dairy equipment & Power electronics Products.