Rathi Polyplast Pvt. Ltd. Kaladera, Jaipur, Rajasthan

  This Pipe is made of un-plastisized Poly Vinyl Chloride(uPVC). It is a versatile plastic having an excellent combination of strength, chemical inertness and fine resistance, which gives optimum performance at very low and very high temperature like less than 0o to 60oC for pressure rating as per IS: 4985:2000.   BENEFITS       Corrosion resistant pressure pipe Resistant to most acids, bases, salts, aliphatic, solutions, oxidants and halogens Best in chemical processing, plating, high purity applications, potable water systems, water and wastewater treatment irrigation, agriculture and other industrial applications involving corrosive fluid transfer Plumbing and drainage systems in the dwelling houses Reliable leak proof joints   SIZE       90 mm to 315 mm ODCI, plain ended & socketed pipe for solvent cement jointing 63 mm to 315 mm ODCI, plain ended & socketed pipe for solvent cement jointing 40 mm to 180 mm ODCI, plain ended & socketed pipe for solvent cement jointing 40 mm to 315 mm ODCI, socket ended with elastomeric sealing ring    

          Poly Ethylene Piping Systems are the most preferred means of transportation and distribution of Natural Gas Worldwide.   MATERIAL       The raw material used is Medium Density Poly Ethylene(MDPE) PE-80 and PE 100 is used for the production of Gas Pipes.   PRODUCT RANGE       These Pipes are manufactured in the range of 20mm to 500mm (Outer Diameter) in all pressure ratings. These pipes confirm to various International standards as ISO 4427, BS 7281, DIN 8074/75 and BIS Standard IS:14885. These Pipes are identified by their colour for different uses for eg. Yellow for Gas, Orange for Petrol and Blue for Water. These Pipes can tailor make to meet specific requirements of individual Gas Customer.   SALIENT FEATURES       Poly Ethylene Pipes are used world over for natural gas distribution at 4 Bar Pressure, due to their excellent technical and operation advantages as a pipe material.

Worldwide HDPE Sprinkler System is found to be the best method to get maximum yield at low cost. It has been observed that, a sprinkler system can irrigate 2 to 3 times more farm and in the same quantum of water. The sprinkler helps in cleaning the surface of the plants, thereby helping them in easy photosynthesis. This results in greater yield. In winter season, the sprinkler system saves the surface of the plants from accumulation of frozen water and in summers it saves evaporation of water to the tune of 40%. The sprinkler system spreads the water in the farmland uniformly and thus saves the plants from water clogging and scarcity. Maximum water reaches the roots of the plants.

HDPE Pipes are manufactured from High Density Poly Ethylene Polymers i.e. PE-63, PE 80, PE 100. HDPE Pipes are available in sizes 20mm to 315mm outer diameter and in pressure rating ranging from PN 2.5 to PN 16.0.   APPLICATIONS       Water Supply Systems In Water supply distribution systems As a replacement of G.I. Pipes in Borewell Application to submersible pumps For suction and delivery lines of jet pumps and centrifugal pumps Domestic Gas Distributions is perfectly possible   INDUSTRIAL APPLICATIONS       Disposal of corrosive effluents chemicals and treated / untreated wastes Acids and Alkalies can be transported through these pipes For conveying edible oils, fruit pulps, juices, milk and other food products As ducts for Air Conditioning and ventilation For Transporting slurries of Iron Ore, FlyAsh etc Under Water (Submarine pipe lines) pipe lines is feasible   ENVIRONMENTAL PROTECTION       HDPE Pipes are also used for Industrial waste treatment plants and water treatment plants For disposal of sand slurry in dredging operations For drainage of sewerage   ADVANTAGES       Low Specific weight and flexibility Perfect weld ability, tough and strong Abrasion and wear resistant Good Chemical and weathering resistance Low co-efficiant of Friction   RECOMMENDATIONS         DEPTH OF THE BORE PRESSURE CLASS         Up to 55 meters 4.0 kg/cm2         Up to 90 meters 6.0 kg/cm2         Up to 140 meters 10.0 kg/cm2         Up to 170 meters 12.5 kg/cm2

HDPE Pipes are manufactured from High Density Poly Ethylene Polymers i.e. PE-63, PE 80, PE 100. HDPE Pipes are available in sizes 20mm to 315mm outer diameter and in pressure rating ranging from PN 2.5 to PN 16.0. APPLICATIONS Water Supply Systems In Water supply distribution systems As a replacement of G.I. Pipes in Borewell Application to submersible pumps For suction and delivery lines of jet pumps and centrifugal pumps Domestic Gas Distributions is perfectly possible

We are indulged in manufacturing and supplying best quality Emitting Pipe. These pipes are used widely in various irrigation systems. Our offered pipes are available for the clients in different size, lengths and internal diameters. The provided pipes are quality certified with the aid of diligent analysts. This Emitting Pipe is packed in premium packaging for delivery at the client's defined place within the limited time frame.   FEATURES       Highly permeability Leakage proof quality Smooth finishing   MATERIALS       The material used in the manufacture of emitting pipes and their fitting shall be resistant to fertilizers and chemicals commonly employed in irrigation, and shall be suitable for use with water at temperatures up to 60oC and at pressures designed for the emitting pipe. The materials shall, as far as possible, not support the growth of algae and bacteria. The parts of the emitting pipe that are exposed to sunlight, shall be opaque and protected against UV degradation.    

The pipes have all the better qualities of a pipe and better substitute for costly Metallic and Non-Metallic pipes like CI, GI, AC, RCC & MS. HDPE(Rathi Brand) Pipes are generally made black in colour by addition of Carbon Black to protect from aging & degradation due to ultraviolet sunrays

We are offering best mdpe pipe supplying company.

We are dealing best Sprinkler supplying company.

olyvinyl Chloride (PVC) pipes are the replacement of cement, GI, and CI pipes, Due to light weight, it is easier to transport and has better life's-PVC Pipes are manufactured from PVC Resin - Suspension Grade, K-Value 6701 a bulk polymer suitable for pressure pipes.

One of the best upvc pipe supplying company.

We are offering best swr pipe supplying company.

We are dealing best sprinkler fitting supplying company.