Indian Machine ToolsCorporation Industrial Area, Jalandhar, Punjab

Bench drilling machine is normally used for doing lighter jobs in steel and cast iron also soft material jobs like aluminum, brass, wood, plastic etc and. It is the widest circulated machine from the house of ITCO drilling machines. Both bore of head and arm of the machine are precision machined to close tolerances and are accurately done for long life.

Itco pillar drilling machine of 20mm capacity has these features: The spindle of this machine is made from alloy steel with four splines as per machine tools spline standard with spindle Morse Taper of MT-2. The drilling capacity of this machine is 20 mm in steel, 22 mm in cast iron. The main pillar is made up of seamless pipe of diameter 72 mm. 1Hp 1440rpm Electric Induction motor is required for running this machine. Round and square work tables are available with dia325mm and 300x300mm resp. Spindle stoke of this machine is 125mm with centre distance of 215 mm. Standard accessories includes ready to fit Motor pulley and drill drift.

In Tapping Machine, tapping or threading operation is done along with drilling. This machine is most suitable in areas where operator needs to perform drilling and tapping operations without opening the job such as using a quick change chuck. The tapping attachment is fitted on the motor plate that is fixed on the machine body. The tap when completes the desired depth is reversed automatically by the limit switch. The tapping attachment has a toggle switch with options of limit control and foot control. When the tapping is done for a blind hole then we move the toggle switch upwards to ‘limit control’ and set the depth with two small stoppers fitted on the main rod. For the tapping in a though hole then you move the toggle switch to ‘foot control’ option and complete the tapping using the foot switch. Here the stoppers and limit switch is not used. The tapping operation starts by engaging the tap to the hole and the tapping tool itself takes its own movement to complete the depth of thread. So no effort is needed during the tapping cycle.