Ripu Impex Ashok Nagar, Jalandhar, Punjab

Number Of Flower : Cutting Tools

Brand Name : DAMAN

Model Number : ripu54845

Size : 3/8"

Material : Stainless Steel

Hammer Type : Claw Hammer

For transporting light weight goods, rough top belt is designed, either as, inclined or, horizontal as suitable for fragile or deformed materials and packed goods such as Glass, Papers, Bags, Boxes or Cartons to a maximum of 35 degrees.Sidewall Conveyor Belt is designed with two corrugated sidewalls and cleats moulded to cross-rigid base belt and can carry heavy product loads up to the inclined angle of 750. This belt is popular where space is at a premium and steep incline angles are desired.

Material : Carbon Steel

Composed of Synthetic Rubber Compounds. This is resistant to Mineral, Vegetable, Animal Oils and Fats. As per IS 1891 (Part – III).

Number Of Flower : Cutting Tools

Brand Name : DAMAN

Compounded rubber cover grade to provide adequate heat resistance for handling material temperatures over 1200C for coarse and 1500C for fine materials. Conforms to International Standards IS 1891 (Part-II) for HR Type T-2 Grade.

Width Range - 25mm to 400mm Length - 100 Mtrs. single roll length Fabric - Soft Hard Cotton Ducks Synthetic Fabrics No. of Ply - 2 to 10 Available in Cut Edge & Round Edge Construction. Available in Grey, Black, Camel, Beige, Yellow colors or as per customer's requirements.

These are Fire Resistant and Antistatic Properties. Grade is recommended for use where Fire Hazard exists, eg. Thermal Plants, Underground Mines. The important characteristic is self-extinguishable cover rubber and meeting the drum friction test. Conforms to International Standards IS 1891 (Part – V).

This grade is recommended for compounded rubber cover grade handling moderately abrasive material. Conforms to the maximum abrasion loss value specified for Grade like sized coal, ash, chalk, bauxite, etc. Conforms to International Standards IS 1891 (Part-I).

This Grade is Specially Compounded Rubber Cover recommended for good resistance to cutting and gouging and conforms to abrasion, loss value. This is recommended for conveying, heavy, sharp, highly abrasive materials like metallic ores, granite, limestone, coal, blast furnace, slag and clinker, etc. Belts made with this grade are as per International Standards IS 1891 (Part-I).

Brand Name : DAMAN HAND TOOLS

Feature : Quality tested

We are the main supplier of this product.

Material : High Carbon Steel

Brand Name : DAMAN

Number Of Flower : Cold Chisel

Size : 12"---42 "

Fully Polished Eliptical Pattern (Sizes 6 to 50mm), Raised Panel ASME B107. 100-2002 (B-107.6) Sizes 6 to 32mm, Stubby Wrench Sizes 8 to 25mm, Recess Panel (Sizes 6 to 32mm), Cold Coined & Stamped (Sizes 6 to 50mm), Material: CRV Steel / Carbon Steel. Matt / Satin Finish. Available in different sets with a wide range of packaging.  

Fully Polished Eliptical Pattern (Sizes 6x7 to 30x32mm), Long Pattern (Sizes 6x7 to 30x32mm), Recess Panel (Sizes 6x7 to 30x32mm), Cold Coined & Stamped (Sizes 6x7 to 30x32mm), Material: CRV Steel / Carbon Steel. Matt / Satin Finish. Available in different sets with a wide range of packaging.  

DIN 897 Shallow Offset (Sizes 6x7 to 30x32mm), Deep Offset (Sizes 6x7 to 30x32mm), Fully Polished Eliptical Pattern, Cold Coined & Stamped. Material: CRV Steel / Carbon Steel. Matt / Satin Finish. Available in different sets with a wide range of packaging.  

Manufactured from Malleable Cast Iron for back and union nuts on pillar and bath taps.  

Professional Stillson made from quality drop-forged steel. Wear & distortion-resistant. Hardened & tampered jaws allowing greater grip and retechting. Available in Full Painted (8" & 14"), Half Painted (10", 18" 12" & 24").  

Made from quality drop-forged steel. Wear & distortion-resistant. Hardened & tampered jaws allowing greater grip and retechting. Available in Bright Chrome Plated (6" & 10"), Auto Black Finish (8" & 12").  

Hand driven wrench. Suitable for most oil filters.  

Available in Bright Zinc Finish, Bright Chrome Plated Finish