heatless desiccant air dryer
Get Price Quote
1 Piece (MOQ)
The No Purge Loss Type Air Dryer and easy to get desired dew point by removing moisture from compressed air. Excellent in desiccant drying Minimum Energy Loss Very Economical Zero purge loss ADP (-) 40°C can be easily achieved
Heatless Air Dryer
Get Price Quote
A Heatless Air Dryer consist of two towers, which, alternately cycle on drying and regeneration. Each tower is filled with a bed of adsorbent desiccant. When one tower is on drying cycle, the desiccant adsorbs moisture from the incoming wet air stream and the other tower is on a regenerating cycle, which, a small portion of the super dried air passing through the desiccant to pick up and remove the adsorbed moisture, which is then vented to atmosphere. The towers are alternated in such a manner so that Dry desiccant is always in contact with wet compressed air, resulting in a continuous supply of Dry Air downstream. The process is automatically reversed from one tower to another by a microprocessor based sequenced timer. Dryer must be protected against water and oil suspended in the form of drops or finely dispersed mist. If the risk for such condition exists, a high efficiency pre-filter must be installed before the dryer. In regular course a ceramic candle Pre-filter is installed prior to the dryer to take care of incoming dust, dirt and foreign particles. By default, a ceramic candle After-filter is installed after the dryer to take care of desiccant dust carry forward in the dry air. The Pearl make heatless dryer is capable of providing a -40°C or lower atmospheric dew point and features a non-lubricated 3-way pneumatic switching valve. The operation is fully automatic and continuous without attention. Features: Pressure equalization: ensures dry air supply is continuous and at constant pressure. Electronic Timer: Highly precise and fail-safe with excellent repeatability Low Dew Point: Constant atmospheric dew point of - 40°C or below. Instant dry air availability: Easy to install & operate, requiring very few, low-cost spares. Low Power Consumption: Approximately 50 Watts only. Equipped with Silencers: low noise level.
Best Deals from Heatless AIR Dryer
Trident Dryspell Plus Heatless Desiccant Air Dryer
5,000 Per Piece
1 Piece (MOQ)
Industrial Heatless Air Dryer
80,000 Per
1 Piece (MOQ)
Heatless Refrigerated Air Dryer
15,000 Per Piece
1 Piece(s) (MOQ)
Heatless Air Dryer
Get Price Quote
1 Pieces (MOQ)
Kaeser Heatless Regenerative Desiccant Air Dryer
Get Price Quote
1 Piece (MOQ)
Heatless Air Dryer
Get Price Quote
Heat less air dryers are used instrumentation and process applications like CNC machines, spray painting, nitrogen generators, laboratories etc. Main Features are Dew point achieved - 40˚C. Compact design, can be mounted on wall. Low power consumption. Light weight, Aluminium construction, Rust free. Specially graded desiccants for optimum performance. Equipped with pre filter & internal post filter. Quality as per ISO 8573.1 class 3. Range from 5 CFM to 1000 CFM.
Heatless Air Dryer
160,000 Per Piece
1 Piece (MOQ)
Heatless Air Dryer
45,400 Per Piece
1 Piece (MOQ)
Heatless Air Dryers
Get Price Quote
1 Piece (MOQ)
Heartless Air Dryer
Heatless Air Dryer
Get Price Quote
Avail from us, high performing Heatless Air Dryer, which has two desiccant towers. These two towers provide drying and regeneration respectively. These Heatless Air Dryers are available in various specifications to meet the varied requirements of the clients. Highlighting Features Simple operation Easy to maintain Microprocessor based Controller with Purge Saver No need of heater or cooler Atmospheric dew point of (-) 40 to (-) 60 Deg C can be easily achieved. Simple operation
Heatless Air Dryer
30,000 - 3,000,000 Per Number
Heatless Air Dryer
25,000 - 80,000 Per Piece
1 Piece (MOQ)
Features Compact design Pre Filter and after filter are standard Counter flow drying and regeneration Low pressure drop Automatic Re-pressurization fixed purge orifice.
Air & Gas Dryer
Get Price Quote
Heatless Air Dryers Operating principleIn Heatless Dryers, two vessels filled with desiccant are provided, which cycle automatically, producing Dry air continuously. In these units, wet air enters the bottom of one vessel and passes upwards through the desiccant bed where the moisture is adsorbed. The dry air comes out from the top. A small portion of Dry air is passed downward through the desiccant bed in the second vessel, which is under re-generation. Moisture laden purge air is then vented out to atmosphere. The purge loss is around 7.5% of the total air flow. At preset interval, the vessels changeover automatically, and Dry air is available continuously, without any surges.Simple Design / Easy operationThis is the simplest type of Air Dryer with Activated Alumina / Molecular sieves drying agent. This design is virtually maintenance free, fully automatic, and requires no attention for years. Heatless type dryers do not require any heating for re-generation and therefore are very simple in design and maintenance free.Low Investment / Low operating cost Due to its inherent simple design, investment in this type of dryer is the cheapest and the payback on this investment is very quick. Low temperature operation reduces corrosion in towers and desiccant lasts longer. Power requirement is single phase 220 /110 volts,50 Hz , 60 watts only for solenoid valves operation.
Heatless Adsorption Air Dryer
Get Price Quote
1 Piece(s) (MOQ)
We are amongst the chief Heatless Adsorption Air Dryer Manufacturers, Importers and Suppliers based in India. Our Heatless Adsorption Air Dryer is based upon the natural phenomenon of �Desiccant�, which allows establishing equilibrium with the surroundings. In Heatless Adsorption Air Dryer, wet Air (fluid) is cycled automatically between two desiccant towers. One tower adsorbs the moisture from the wet fluid, while the other being regenerated. The wet fluid enters the first tower and it passes through the desiccant bed where the saturated moisture is absorbed. Afterwards, a small portion of the dried air at ambient temperature and pressure is passed through the desiccant bed in the second tower for regeneration. At present interval, the towers changeover automatically and the cycle continues giving out a regular supply of fantastic dry air, which have dew points up to (-) 70oC (Atm.) Types Embedded Internal Heat Adsorption Dryer. Split Flow No Loss Adsorption Type Dryer. Heat of Compression No Loss Absorption Dryer. Blower Heat Regenerated No Loss Adsorption Dryer.
heatless type air dryer
Get Price Quote
The presence of oil, moisture and dust particles in compressed air is a well known fact for industrial applications. As the technology advanced with inducation of sophisticated modern machineries working on compressed air, the usage of recommended quality class of air as per machines manufacturer or international Standard Organisation (ISO) or Pneurope recommendation has become necessary. The usage of filtered, dry air as per above recommendations results in reduced wear and tear, increased machine uptime, lower rejections, better product quality and above all considerable saving in energy.
Heatless Air Dryer
50,000 Per Piece
2 Set(s) (MOQ)
To handle both automated inbound and outbound orders, we have exceptional warehousing solutions. We keep the wide array of products sorted in the warehouse to make sure that the delivery commences systematically. Notable name in this field, we successfully cater to the demands of our clientele from Ghaziabad(India) to every nook and corner.
Automatic Heatless Air Dryer
45,000 Per Piece
Heatless Air Dryer
100,000 Per Piece
Heatless Air Dryer
Get Price Quote
We are offering heatless air dryer. The heatless air dryer offered by us comes with three stage prefiltration system - pre filter, oil removal filter (before the dryr) and post filter ( after the dryer). pre filter removes all dust, dirt, pipescale, rust upto 10 micron and oil removal filter removes oil contents from compressed air line upto 0.05 ppm & also remove dust particles upto 0.01 micron and is thus prevented form entering the drying towers. their entry into the tower would result in the desiccant getting spoilt and ineffective. This is the most simple and easy to maintain system. this comprises of two adsorbed towers filled with desiccant. at a time one tower supplies dry air and other goes into regeneration through 3 way valves and microprocessor controller automatic cycling for towers. heartless type air dryer pressure dew point is -70 deg.c ( water content 0.0028 gm3) and the quality of air is 1+. The postfilter ensures that desiccant dust, if any, generated due to attrition is prevented form carry over. applications food & beverage industrypharmaceutical industrypaintingautomobile industrydefence sectorchemical industry refinerieslaboratoriesgas industryprinting industry also required for cns & laser machinesinstrumentationair tools
heatless type air dryer
Get Price Quote
We are manufacturer and supplier of Heat Less Air Dryer. Also called as desiccant dryer, compressed air passing through towers filled with desiccant like alumina, silica gel. This material attract water molecules and dry air (moisture free) air comes out as product. This heat less air we can give better dryness up to -40 dew point. And the moisture is removed by purging or regeneration by tower.it is a device which remove the water contains from compressed air.These compressed air dryers is widely found in commercial as well as industrial applications.Water vapours in the compressed air can be cause of operational problems like freezing of outdoor air lines, corrosion in pipe lines, industrial equipments, malfunctioning of pneumatic process control instruments and many more so air dryers playing vital role in that case.
Heatless Air Dryer
Get Price Quote
The company is a reputed Manufacturer & Supplier of Heatless Air Dryer. The Heatless Air Dryer we offer is attributed with features such as rigid construction, excellent performance, high efficiency and durability. The Heatless Air Dryer supplied by us is also compact and require very less maintenance. Clients can avail stringently quality tested Heatless Air Dryer from us at the market leading prices. Construction & Working : Moisture from compressed air / gas is removed by suitable absorption media. The principal is based on pressure swing adsorption and the operation is totally automatic and very simple. Two drying chambers are provided which keeps on changing their position according to designed cycle. While one chamber dries the air, the other gets regenerated by using a small portion of dried air, which flashes out the moisture from the absorption in previous cycle. Electro pneumatic vales are provided for total automatic changer over moisture level of 80ppm (dew point -40 dec. c) or less can be achieved.
Heatless Dryer
Get Price Quote
Suitable for extensive industrial usage, our Heatless Dryers are of unmatched standards. We fabricate them using the latest CAD/ CAM technologies. Therefore, our entire range is structurally reliable, dimensionally accurate, excellently finished and durable. We provide Heatless Dryer in various designs and sizes to meet varied requirements of buyers. In addition, we offer customized solutions. Buyers can get Heatless Dryer from us anytime and expect on time delivery of consignments.
Heatless Dryer
Get Price Quote
Heatless Dryer simplest type of air dryer with Activated Alumina/Molecular Sieves drying agent. Heatless Dryer is virtually maintenance free, fully automatic, and requires no attention for year. Heatless Dryer does not require any heating for re-generation and therefore are very simple in design and maintenance free.Operating PrincipalIn Heatless Dryers, two vessel filled with desiccant are provided which cycle automatically, producing dry air continuously. In these units, wet air enters the bottom of one Vessel and passes upwards through the desiccant bed where the moisture is adsorbed. The dry air comes out from the top. A small portion of dry air is passed downwards through the desiccant bed in second vessel, which is under re-generation. Moisture laden purge air is then vented out to atmosphere. The purge loss is around 7.5% of the total airflow. At preset interval, the vessel changeover automatically, and Dry air is available continuously, without any surge.Low Operating CostDue to its inherent simple design, investment in this type of dryer is the cheapest and the payback on this investment is very quickly. Low Temperature operation reduces corrosion in tower and desiccant lasts longer. Power requirement is 60 watt only for Solenoids Valves OperationCapacity Air Capacity : 5 to 10000 NM3/Hr. Dew Point : Up to (-) 60oC Operating Pressure : 5 to 35 Kg/cm2g
Heatless Air Dryer
Get Price Quote
Desiccant Heatless Type Dryers
Get Price Quote
How does it workRegenerative desiccant dryers normally are of twin tower construction. One tower dries theairtrom the compressor while the desiccant in the othertower is being regenerated afterthepressure in the tower has been reduced to atmospheric pressure. Regeneration can beaccomplished using a time cycle or on demand by measuring the temperature or humidity inthe desiccant towers or by measuring the dew point ofthe air leaving the on-line tower.In the heatless regenerative desiccanttype, no internal or external heaters are used. Purgeair requirement can range up to 18% otthe total air-flow. The typical regenerative desiccantdryer at 1000 psig has a pressure dew point rating of-40°F but dew points down to -100F can be obtained. Advantages of Regenerative Desiccant Type Dryers include : Very tow dew points can be achieved without potentiai freeze-up. Moderate cost of operation forthe dew points achieved. Low maintenance costs. Heatless type can be designed to operate pneumaticallv for remote, mobile or hazardous locations.
Heatless Air Dryer
Get Price Quote
Compact, light weight and durable are some of the attributes of our Heatless Air Dryers. We are an established Manufacturer of Heatless Air Dryers from Maharashtra. The Heatless Air Dryers have a capacity of 5 CFM to 100 CFM and trouble free valve design. Simple and easy to install, our Heatless Air Dryers can be wall mounted. Low power consumption, automatic and maintenance free operation make our Air Dryers the preferred choice among buyers.
Heatless Air Dryer
18,500 Per Unit
1 Unit (MOQ)
Heatless Air Dryers
Get Price Quote
The theory behind operation of Heatless Dryers, is very simple. Chemicais which have the capacity to adsorb moisture on its surface. These adsorbents are used to dry the air. The adsorber are packed into two columns. The Cornpressed air is passed through this Column of packed adsorbent dessjcant. It is obvious that after a certain period or drying (i.e. few hours few minutes) the dessicant looses its capacjty to adsorb more moisture and hence is not capable of drying any more air, in its present Condition. The drying Capacity of the dessicant is restored by the process of regeneration.