Aryan Enterprises Safidon, Jind, Haryana

We are widely acclaimed for supplying Water Fire Extinguisher. We make available �MAHAVIR� Brand BIS approved ISI marked Water Fire Extinguisher. Our Water Fire Extinguisher is suitable for �A� Class fires, which involve materials like wood, paper, cloth, plastic & fiber, rubber etc. Water Fire Extinguisher, supplied by us, is one of its kinds and has no other parallel in the market in terms of quality and effectiveness. Caution : Not to be used on electrical fires

End Connection : 3"BSP(lNT) or flanged end as per requirement       

gas : LPG, Natural Gas, Nitrogen Oxygen, Hydrogen, Carbon dioxide, Argon

End Connection : 3"BSP(lNT) or flanged end as per requirement       

gas : LPG, Natural Gas, Nitrogen Oxygen, Hydrogen, Carbon dioxide, Argon

End Connection : 3? NB flanged as per ANSI  150 rating

End Connection : 3? NB flanged as per ANSI  150 rating

Zero Governors are used to supply gases at atmospheric pressure to the mixing chambers. These are mainly used for the furnaces in glass industry. They are very sensitive and precisely maintain the required outlet pressure.

These regulators are low pressure high flow rate pressure regulators. These are mainly used where the inlet pressure is varying in a wider range. These regulators are suitable for medium size to bigger size furnace. Apart from the regulators shown, we could also supply low pressure high flow regulators with specifications as per the end customer usage for Oxygen, Nitrogen, and air.

End Connection : Inlet - 1/2" BSP(INT) Outlet: 3/4" BSP(INT)

End Connection : Inlet - 1/2" BSP(INT) Outlet: 3/4" BSP(INT)

These regulators are used in pressure reducing system for Natural gas or LPG. They are used to reduce the natural gas pressure from 4 kg/cm2 to 75m bar before supplying it to the domestic feeder line. These regulators are having built in slam shut off valve and creep relief valve (safety relief valve). These regulators are available in two models R-4405 & R-4403 depending upon flow.

End Connection : 1" BSP (INT)

gas : LPG, Natural Gas, Oxygen, Nitrogen, Hydrogen, Carbondoxide  

End Connection : 1" BSP (INT)

gas : LPG, Natural Gas, Oxygen, Nitrogen, Hydrogen, Carbondoxide  

End Connection : 1/2" BSP (INT)

End Connection : 1/2" BSP (INT)

End Connection : Inlet - 1/2" BSP (INT)

End Connection : Inlet - 1/2" BSP (INT)

Preset Pressure Regulators These regulators are having preset outlet pressure. However the outlet pressure can be slightly adjusted by rotating the spring adjusting screw. The Industrial Pressure Regulator R-4109 is available with 4 different types of preset outlet pressures. These are suitable for canteen, restaurants & small Industrial furnaces.

The regulators R-2402 and R-4108 are mainly used for Ammonia gas. The trim parts for these regulators are of stainless steel. R-4108 is a preset type regulator and is mainly used as second stage pressure regulator. R-2402 is an adjustable pressure regulator and is mainly used as a first stage pressure regulator.

End Connection : For R-2316 40mm NB flanged end. For R-2317 50mm NB flanged end.

gas : LPG, Natural Gas, Nitrogen Oxygen, Hydrogen, Carbon dioxide, Argon

End Connection : For R-2316 40mm NB flanged end. For R-2317 50mm NB flanged end.

gas : LPG, Natural Gas, Nitrogen Oxygen, Hydrogen, Carbon dioxide, Argon

End Connection : Inlet - 1", 1 1/2? BSP(EXT)

End Connection : Inlet - 1", 1 1/2? BSP(EXT)

Adjustable Regulators For High Pressure & High Flowrates. Regulators R-2307 & R-2310 are mainly used in "Soft Drink Industries" for Carbon Di Oxide gas pressure reducing system. They are also used in steel industries for high pressure oxygen lancing purpose and for pressure reducing systems for high pressure Gas manifolds.

Regulator R-2206 is available with specifications similar to that of R-2202 except inlet connections. The inlet connection for R-2206 is similar to that of Adaptor R-1703, so it can be directly mounted on LPG cylinder. Outlet Size : 3/8" BSPM

End Connection : Inlet : 21.8 x 14TPI L.H. Union nut

End Connection : Inlet : 21.8 x 14TPI L.H. Union nut

End Connection : Inlet - 5/8" BSP Ext. (LH) with Bullnose & Outlet - Nozzel to suit 6mm l.D. hose pipe.

gas : Acetylene

End Connection : Inlet - 5/8" BSP Ext. (LH) with Bullnose & Outlet - Nozzel to suit 6mm l.D. hose pipe.

gas : Acetylene

End Connection : Inlet - To suit outlet of std. cyl. valves as per IS:3224 & Outlet - 3/8" BSP (INT) or 1/4" BSP (INT)

End Connection : Inlet - To suit outlet of std. cyl. valves as per IS:3224 & Outlet - 3/8" BSP (INT) or 1/4" BSP (INT)

These regulators have wider outlets pressure range. The outlet pressure can be easily adjusted by rotating the knob of spring adjusting screw. By rotating the knob anticlockwise the outlet pressure is reduced & by rotating it clockwise the outlet pressure is increased. R-2101 & R-2111 are mainly used for gas cutting or welding purpose.

End Connection : 3/4

gas : Natural Gas, LPG

End Connection : 3/4

gas : Natural Gas, LPG

End Connection : 1/2" BSPT (INT)

gas : Natural Gas, LPG

End Connection : 1/2" BSPT (INT)

gas : Natural Gas, LPG