Shree Hospital Equipments Ichalkaranji, Kolhapur, Maharashtra

Frame made from 25mm x 50mm square pipe horizontal Supports 2 supports. Legs made from 31.75mm Round pipe. MS pipe pretreated in seven tanks chemical process & epoxy powder coated.

Material : MS material

Frame made from 25mm pipe & Heavy horizontal Supports. All Stainless steel pipes & Sheets 1.22mm (18 SWG) thick. Available in two seater, three seater, Four Seater.

SS or MS top made in 3 sections fabricated mainly out of 1.22mm (18 SWG) sheets, which it makes rigid & sturdy Hospital Furniture. SS or MS flat pieces welded to the horizontal supports. The backrest adjustable on auto ratchet arrangement, which consist on of 12mm Ø rod. L bent lithotomy rods made of 12 mm Ø SS these adjustable by 2 clamp levers. The entire trendelenburg arrangement mounted on rectangular frame, with rectangular SS or MS tube support. This frame hinged on the tubular base.

Simple Hospital Bed frame made from 25mm X 50mm x 1.22mm(18 SWG) M.S. rectangular tubes, which it makes rigid Medical Bed. Three-section top made from 1.22mm(18 SWG) sheets. Uniformly perforated, Suitably fitted to the top. I. V. Location and urine bag hook provided. Pre-treated in seven tanks chemical process and Epoxy powder coated,which makes it uncorrosive Medical equipment Hospital Furniture.

Mainframe made from 25mm x 50mm x 1.22mm (18 SWG) M.S. rectangular tubes, which it makes sturdy Medical Furniture Hospital Furniture. MS Material Pre-treated in seven tanks chemical process & epoxy powder coated, which It makes uncorrosive Medical Bed. Backrest, maneuvered by screw system. Provided with thrust ball bearing.

Size : 182 cm (72") x - 84cm (33") x H - 56cm (22")

Ms Material pre-treated in seven-tank chemical process & epoxy powder coated, which it makes uncorrosive Hospital furniture Medical furniture.

Three-section top made from 1.22mm (18 SWG) sheets. Uniformly perforated, suitably fitted to the top. The main frame made from 25mm X 50mm x 1.22mm (18 SWG) M.S. rectangular tubes, which it makes rigid Hospital Furniture. MS Material Pre-treated in seven tanks chemical process & epoxy powder coated, which it makes uncorrosive Reletive Bed.

Size : 182 cm (72") x - 68cm (27") x H - 56cm (22")

Two-section top made from 1.22mm (18 SWG) sheets. Uniformly perforated, suitably fitted to the top. Pre-treated in seven tanks chemical process & epoxy powder coated, which it makes uncorrosive Medical Furniture Medical Equipment. Bows, legs made from 1.25” dia x 1.22mm (18 SWG) pipes.

Size : 137 cm (54") x – 76 cm (30") x H - 56cm (22")

MS or Stainless steel rigid tubular frame mounted on four Legs. Tubular frame made from 1.22mm (18 SWG) S.S. sheet & pipes, which it makes rigid Medical furniture. MS material pre-treated in seven tank chemical process & epoxy powder coated, which it makes uncorrosive Hospital furniture Medical Equipment.

Backrest Adjustment, head low up, Kidney Bridge, lateral tilt maneuvered by screw system, provided with thrust ball bearings. All screws easily wind able by independent handle. Hand rest, screen bar, shoulder rests provided. Height adjusts by hydraulic pump. Lithotomy rods with foot straps, fitted with rotary clamps, allowing height forward of backward adjustments and three extra stainless steel clamps for attaching accessories to sidebars.

Lithotomy rods with foot straps, fitted with rotary clamps, allowing height forward or backward adjustments.All screws provided with thrust ball bearings & easily wind able by independent handle. Trendelenburg – 25º degree each side. Foot controlled floor-locking system.Extensive use of stainless steel for rust free long life, which it makes uncorrosive Medical Equipment Medical furniture.

One of the technological leaders in the area of LED illumination for operating theaters, in-depth manufacturing competence - few companies currently produce such quantities of LED lights - is combined with innovative products.The result is top performance, high economic viability and a strongly individual character. While other manufacturers are still at the drawing board, LUXSTAR is already supplying pioneering light and system solutions. Come and see for yourself.

The result is top performance, high economic viability and a strongly individual character. While other manufacturers are still at the drawing board, LUXSTAR is already supplying pioneering light and system solutions. Come and see for yourself.

Scrub top made from S.S. 1.22mm (18 SWG) sheet, which it makes rigid & sturdy Hospital Furniture Scrub Made from Stainless steel & pipe 304 grades, which it makes uncorrosive Medical Equipment Medical Furniture.

Tubular frame made from 1.22mm (18 SWG) S.S. sheet & pipes. MS material pre-treated in seven tank chemical process & epoxy powder coated.Maintenance free 2” rigid castors for go anywhere.

MS or Stainless steel rigid tubular frame mounted on two castors 100mmÆ. Tubular frame made from 1.22mm (18 SWG) S.S. sheet & pipes. Pretreated In seven tank chemical process epoxy powder coated.

MS or Stainless steel rigid tubular frame mounted on two castors 100mmdia, which it makes rigid & sturdy Hospital Furniture. Tubular frame made from 1.22mm (18 SWG) S.S. sheet & pipes, which it makes uncorrosive Medical Equipment Medical Furniture.,br> MS Material Pretreated In seven tank chemical process & epoxy powder coated.

Stainless steel rigid tubular frame mounted on four castors 100mm dia, which it makes uncorrosive Medical Equipment Medical Furniture. Two tops and all tubular frames made from 1.22mm (18 SWG) S.S. sheet & pipes.

MS Material Pre- treated in seven-tank chemical process & epoxy powder coated, which it makes uncorrosive Medical Equipment Medical Furniture. Heavy 1.22mm (18 SWG) M.S. or stainless steel sheet for long life, which it makes rigid & sturdy Hospital Furniture.

SS rigid tubular framework mounted on four swivel casters 100mm Ø. Bowl and bucket on one side and app. side one handle to carry the trolley. All pipes and sheets are 1.22mm (18 SWG) thick Stainless Steel, which it makes uncorrosive Medical Equipment Medical Furniture.

SS tubular framework mounted on four swivel casters 125mm Ø.The top drawers have containers of different size.All pipes and sheets are 1.22mm (18 SWG) thick, which it makes rigid & sturdy Hospital Furniture Medical Equipment Medical Furniture.