Alarm Systems Dealers in Kolkata

We are offering fire alarm smoke alarm security system. Fire alarm electronic security system, smoke alarm electronic security system to secure your office, bunglow, plant, factory, gym, restaurant, showroom, club, salon, shop, commercial warehouse, godown, store room, residence, apartment, house, flat.

Both for Industrial and Mall/Residential/Office use, we offer a wide variety of products including Passive infra-Red Detectors, Weather-proof Beams, Control Panels, Speech Dialers, Vibration Sensors, Glass Break Detectors amongst other from world renowned companies like Texecom, Securico, C & K, Rokonet, OPTEX etc. Once we are done, even 1 sq.mm of human flesh will not be able to intrude into yo

KEY FEATURES INTEGRATED ALARM SYSTEM CONSISTING OF 14 ZONE FIRE ALARM SYSTEM WITH 14 ZONE AMPLIFIER. 200 LOG EVENTS STORAGE FOR FIRE EVENTS. VOICE EVACUATION FIRE DRILL FACILITY ONE MAN WALK TEST ADJUSTABLE SOUNDER SETTINGS SPECIFICATIONS SYSTEM COMPONENTSIn-built 14 zone fire alarm(12 volt) In built Public Address (amplifier) for 14 zones. [120 Watt] Menu Settings: Sounder Setting(2-59 mins) Fire Drill Evacuate Log (200 Events)   LCD INDICATIONS ON PANELMains onBattery OnBattery LowBattery ChargingZone ConditionsDate and TimeLED INDICATIONS ON PANELSystem On Mains On Battery On Battery Low Battery Charging Zone Indications Fire Normal Open Short Isolate(Zone + Public Address)   SPECIAL FEATURESIn case of Fire the Sounder in the particular zone will start ringing for the set sounder time , then the sounder will start ringing in the floor above the affected floor for the set sounder time and then the sounder will start ringing in the floor below the affected floor.The Amplifier will normally be in the OFF state, in case of fire the amplifier will automatically be switched on and the sounders will go in alarm state and will be ready for any announcement.

A fire alarm system consists of number of devices which work together to detect and alarm people with the help of visual and audio devices. There are different types of detectors (smoke detector, heat detector), manual call points, sirens, flashers, response indicators and the main panel which controls all these devices. So when there is smoke or rise in temperature, these detectors send a signal to the panel and panel generates alarm through sirens and flashers. Alarms can also be generated manually by using manual call points (MCP). We are committed to supply best quality devices to our clients. We understand the critical aspect of security associated with this so we never ever compromise on quality and performance part of our products.

A fire alarm system is number of devices working together to detect and warn people through visual and audio appliances when smoke, fire, carbon monoxide or other emergencies are present. These alarms may be activated from smoke detectors, and heat detectors. Alarms can be either motorised bells or wall mountable sounders or horns.

It Comes where wires are not used and its accessories comes in different kits. For eg:- Wireless remote control,  Wireless panic Switch, Wireless magnectic contact, wireless shutter contact, wireless P.I.R. Motion sensor.

We offer high performance Fire Alarm System, which is designed to detect the unwanted presence of fire by monitoring environmental changes associated with combustion. In general, a Fire Alarm System is classified as either automatically actuated, manually actuated, or both. Automatic Fire Alarm Systems are intended to notify the building occupants to evacuate in the event of a fire or other emergency, report the event to an off-premises location in order to summon emergency services, and to prepare the structure and associated systems to control the spread of fire and smoke. Types Of Fire Alarm Systems Conventional Fire Alarm Conventional panels have been around ever since electronics became small enough to make them viable. Conventional panels are used less frequently in large buildings than in the past, but are not uncommon on smaller projects, such as small schools, stores, restaurants, and apartments. A Conventional Fire Alarm Control Panel employs one or more circuits, connected to sensors (initiating devices) wired in parallel. These sensors are devised to dramatically decrease the circuit resistance when the environmental influence on any sensor exceeds a predetermined threshold. In a Conventional Fire Alarm System, the information density is limited to the number of such circuits used.Addressable Fire Alarm Addressable Fire Alarm Control Panels employ one or more Signaling Line Circuits, slang - usually referred to as loops or SLC loops, ranging between one and thirty. Depending on the protocol used, a Signaling Line Circuit can monitor and control several hundred devices. Some protocols permit any mix of detectors and input/output modules, while other protocols have 50% of channel capacity restricted to detectors/sensors and 50% restricted to input/output modules. Each SLC polls the devices connected, which can number from a few devices to several hundred, depending on the manufacturer. Large systems may have multiple Signaling Line Circuits. Each device on a SLC has its own address, and so the panel knows the state of each individual device connected to it. Common addressable input (initiating) devices include : Smoke detectorsHeat Detectors (Rate of Rise and Fixed Temperature)Manual call points or manual pull stationsNotification appliances (Simplex systems with True Alert signals only)Response IndicatorHooter

We offer microprocessor based solid state alarm annunciator. Function: annunciator is helpful to understand instantly from one place,the abnormal conditions of different process parameters i.e.temp. Pressure, tripping of any monitor relays. The system design is based on cmos technology providing highest degree of reliability, ruggedness, flexibility, economy and aesthetics. it has built in push switches for test, accept, reset and small pizzo buzzer.test push is for instant versification of entire system.this triggers signal of all fault conditions resulting in flashing of all windows and actuation of hooter.external push switches and hooter can be connected through back connection. application: audio visual alarm for * process industry, * electrical panels, * d.g. Set panels, * chemical plants, * power plant. Etc, advanced microcontroller design optically isolated inputs aux. 85-265 v acdc also available *long life super bright leds for each windows *low power consumption *compact size *standard din cut out *built in push switches *provision for external push switches *interlocking potential free relay model no. pand2-4 pand2-6 pand2-8 pand1-12 pand1-16 pand2-24 number of channels 4 6 8 12 16 24 fault input potential free no contact can also be designed for voltage (potential) input window size(h x w) 28 x 57mm 17 x 55mm 17 x 55mm 40 x 40mm 40 x 40mm 40 x 40mm lamps 4 nos. Of super bright red led s legends photo negative changeable from front flash rate 40 flash per min push switches test , accept, re-set push on front panel externalremote pushes can be connected from back terminal relay out put rl1for hooter (potential free) 5 amp, rl 2 for interlocking (potential free) 5 amp aux supply 85 v 110 v 220 v 265 v ac, 12 v, 24 v, 48 v dc (pre-specified) operating temperature up to 50 degree c. (ambient) housing abs moulded sheet steel enclosure mounting standard din size panel enclosure panel cut out(h x w) 185 x 92mm 185 x 92mm 185 x 92mm 170 x 220mm 255 x 345mm 345 x 255mm overall size(h x w x d) 190 x 94 x 150mm 190 x 94 x 150mm 190 x 94 x 150mm 183 x 235 x 180mm 280 x 370 x 70mm 370 x 280 x 70mm inbuild push button yes yes no no yes yes inbuild hooter no no no no yes no

When you’re using an advanced fire safety solution that is reliable, flexible and survivable, peace of mind is the greatest benefit. Protect your people and property with our market-leading systems. They can be tailored for a wide range of buildings, applications and markets, and our technology and comprehensive maintenance can make your job easier by improving serviceability, reducing costs and saving time. Our detection systems help you avoid unwelcome distractions in the workplace.Global Prana provides a complete range of advanced conventional and addressable fire alarm systems, detectors, signaling devices, accessories and service tools for any new or retrofit application.  

We offer Line Pressure Alarm with Gauge. In this medical products industry, our name is renowned as one of the eminent Manufacturers, Exporters and Suppliers of Single Gas Line Pressure Alarm. This type of pressure alarm is widely used in hospitals and medical centers for different applications. Accurate in performance and safe to use, these Line Pressure Alarms are ideal in detecting any kind of defect in signal transmission.

Analog Addressable Fire Alarm Systems are used all over the world for detecting fire hazards early and have an advanced detection mechanism. The system has mechanism of absolute unique identification of each device by individual addressing of all the all loop devices in the system. Each sensor is maintained at the original sensitivity by adjusting the calibration as per the changes caused due to factors like dust or smoke. Features Swift mechanismDependable performanceAutomatic self-testing every 24 hoursSeparate adjustment for day and nightTotal safety and security at one monitoring station Integrated with Building management systemsCCTVAccess Control Systems

Fire Alarm System that we offer makes a siren or a similar noise to let people know that there is a fire. Due to its excellent fire detection capacity, our Fire Alarm System finds extensive usage in schools and other places during fire drills. We are counted among the top companies, which are engaged in supplying Fire Alarm System from West Bengal, India. One can obtain Fire Alarm System from us at a very reasonable price.

Our company is a proficient Supplier and Exporter of Smoke Detector Alarm Systems from West Bengal. Smoke Detector Alarm Systems offered by us are compatible with Fire Alarm Panel of different make. We maintain a large stock of the Smoke Detector Alarm Systems, to meet the bulk and urgent requirements of the buyers. Bulk orders of the Alarm Systems are processed by us within the allocated time.   Details : FM approved detectors available. Apollo/System Sensor/EST/Agni Sensor are available. Compatible with any make Fire Alarm Panel. Smoke, Heat, Multi-sensor detector is available

The ALM-108 Alarm Annunciator provides an ideal solution to alarm monitoring problems which allows an operator to monitor the alarm status of critical parameters. Use of microcontroller has greatly reduced the number of components, thereby enhancing reliability and efficiency.