Bengal Building Solutions Private Ltd. Kasba, Kolkata, West Bengal

Number Of Flower : Wall Putty

Application : Wall Putty

Form : Powder

Feature : Super Smooth Finish

It is a white cement-based putty ideal for using on plastered/ concrete walls and ceilings. It covers unevenness, undulations, and pinholes on the plastered surface. It strengthens the wall and protects expensive paints from dampness, efflorescence, and moisture. Tigonis waterproof wall putty is modified with polymers and special additives for enhanced strength, finish, and performance. Tigonis is one of the leading waterproof walls putty manufacturers and suppliers in West Bengal, Odissa, Bihar, and Jharkhand. ADVANTAGES ► White smooth surface finish ► Considerable reduction of paint consumption ► Protection from flaking, dampening and peeling off ► Highly durable with excellent water repellent nature.

Number Of Flower : Waterproof Wall Putty

Material : White Cement-based With Polymers And Special Additives

Application : Ideal For Plastered/concrete Walls And Ceilings

Feature : Covers Unevenness, Undulations, And Pinholes

Tigonis Wall putty is a white cement-based powder finished coating applied on walls, surfaces, and ceilings. This covers unevenness, undulations and pinholes on the plastered surface. It strengthens the wall and protects expensive paints from dampness, efflorescence, and moisture. Tigonis Wall Putty is modified with polymers and special additives for enhanced strength, finish, and performance. Tigonis delivers the real essence of ultrafine decor—always. Tigonis is one of the leading Wall Putty suppliers in Kolkata, Asansol, Bokaro, Siliguri, Bhubaneswar. Description TIGONIS WALL PUTTY Tigonis premium Wall putty is a white cement based powder finished coating, applied on walls, surfaces and ceilings. This covers unevenness, undulations and pin holes on the plastered surface. It strengthens the wall and protects expensive paints from dampness, efflorescence and moisture. Tigonis Wall Putty is modified with polymers and special additives for enhanced strength, finish and performance. Tigonis delivers the real essence of ultrafine decor—always.

Number Of Flower : White Cement-based Powder Finished Coating

Material : Cement based Powder

TIGONIS Diamond PU is a two part modified Polyurethane multipurpose thin-set adhesive for fixing all type of tiles and stones including (Composites engineered stone) on interior and exterior surface like Concrete Masonry & Brick Masonry, Cement mortar Beds & Plaster, Metal Substrates, dry wall boards, plywood ,all types of wood Substrate. It has been designed for fixing water Sensitive tiles/ stones on deformable or absorbent/ non-absorbent Substrate. It is highly flexible and water freeze and thermal shock resistant when fully cured. Tigonis Diamond Adhesive is prepared by mixing together parts A and part B from the bottom upwards, using a low-rev (=400/ min) halicidalagitator with present mixing of 4:1 of the packs. Pour Part B into the bucket containing Part- A, being careful to mix the two parts uniformly until a smooth paste is obtained.

Material : Polyurethane

Application : Fixing All Types Of Tiles And Stones On Various Surfaces

Number Of Flower : Tile Adhesives

Application : Tiles Use

TIGOSHIELD TOPCOAT combines the benefits of waterproofing as well as heat reduction in a single product. No additional protective coating is required. Features: Waterproofing – Tough durable elastic membrane with > 200% elongation. Good Adhesion – Bonds strongly to the substrate Crack bridging – High flexibility of materials enables it to bridge hairline cracks. Tough and abrasion resistant – Suitable for light foot traffic. Economical – Cost effective and durable coating. Bright white – Heat Reflective and UV-resistant top coat. Temperature reduction – Reduces surface temperature up to 10ºC** in the peak summer Eco friendly – Low VOC.

Application : Waterproofing, Heat Reduction

CRACK RESISTANT | EXTRA WHITE | LONG LIFE Tigonis high-performance polymer modified white cement compound is a premium quality product designed for specialty purpose like Sanitary, Plumbing, Jointing, Fixing, Plugging, repair work and Tile Fixing ( In specific cases ). It is highly suited for filling porous surfaces and tile joints. FEATURES ► Crack Resistant ► Long life ► Does not shrink ► Easy application ADVANTAGES ► Inhibits powdering and cracking. ► Prevent damage to weathering, frost and thermal shock. ► Reduce absorption. ► Designed for interior and exterior used.

Number Of Flower : Polymer Modified White Cement Compound

Feature : Crack Resistant,Long Life,Does Not Shrink,Easy Application

Material : Polymer Modified White Cement

Number Of Flower : Wall Putty

Brand Name : TIGONIS

Application : Wall Putty

Form : Powder

Feature : Super Smooth Finish

Easy to apply. Water Resistance. Anti fungal. Good Compressive Strength. Increases Paint coverage Covers undulations of plastered surfaces. Give sound base for further putty applications Strong adhesion strength. No curing required. Low VOC

Number Of Flower : Wall Putty

Application : Wall Smoothening And Base Preparation For Painting

Feature : Easy To Apply,Water Resistance,Anti-fungal

Tigonis Universal Waterproof Primer is is a water-based Primer composed of acrylic emulsion polymer, properly selected fine fillers, white, and pigments & additives in water as a medium. It is used as a primer over exterior & interior building walls, slopes, and horizontal surfaces before application or on terraces before application of Tigoshield Topcoat or other similar products.

Features & Advantages Easy to use – just add water on site, ready to use. Water resistant – suitable for wet areas. Sag Resistant formula – provides hassle-free application on vertical walls. Highly Polymer modified – provides high adhesion for fixing a variety of tiles and stones. Self-curing properties, which allows hassle-free application with minimum labor. Low VOC – for healthy living. Color : Grey , White Pack Size: 20 Kg, 30 Kg. Coverage Estimates: Coverage approx. 2.75 – 3 sq. ft. / per kg with 3 mm thickness. Pack size Coverage 20 kg approx. 55-60 sq. ft. and with Pack size 30 kg approx. 80-90 sq. ft. using a 6 mm × 6 mm square notch trowel. Note: Coverage will depend on the nature and flatness of the surface and the method of application. For good coverage, it is must that all surfaces are smooth, plumb, level and free from defects and undulations. Application Areas: Interior Floor, Interior Walls (Up to any height), Tile on Tile applications on floor and wall. Tile Size: Interior and exterior Floor application – Up to any size, Interior Wall application – Up to 5 ft. by 2.5 ft. Type of Tile: Ceramic, Vitrified tiles, Clay tiles, Stone, Mosaic, Large Tiles for interior applications, Tiles with porosity less than 3% for all interior applications. Bed Thickness: Up to 12 mm bed thickness. Substrate: Cementitious, plastered walls, Concrete, Cement – lime mortars, Screed.

Number Of Flower : Tile Adhesives

Packaging Type : 20 Kg,30 Kg

Easy to use – just add water on site, ready to use. Water resistant – suitable for wet areas. Good adhesive bond strength & Bonds to various cement-based substrates. Self-curing properties, which allows hassle-free application with minimum labour. Low VOC – for healthy living Coverage Estimates: Coverage approx. 2.75 – 3 sq. ft. / per kg with 3 mm thickness. Pack size Coverage 20 kg approx. 55-60 sq. ft. and with Pack size 30 kg approx. 80-90 sq. ft. using a 6 mm × 6 mm square notch trowel. Note: Coverage will depend on the nature and flatness of the surface and the method of application. For good coverage, it is must that all surfaces are smooth, plumb, level and free from defects and undulations. Application Areas: Interior Floor, Walls (Up to 2 feet) Tile Size: Interior Floor application – Up to 2 ft. by 2 ft., Interior Wall application – Up to 1 ft. by 1 ft. Type of Tile: Ceramic, Clay tiles, any tile with porosity more than 3%. Bed Thickness: Up to 6 mm bed thickness. Substrate: Cementitious, plastered walls, Concrete, Cement – lime mortars, Screed.

Packaging Type : 20 Kg, 30 Kg

Features & Benefits Easy to use – just add water on site, ready to use. Ideal product for tile-on-tile applications on floor. Water resistant – suitable for wet areas. Good adhesive bond strength & Bonds to various cement-based substrates. Self-curing properties, which allows hassle-free application with minimum labor. Low VOC – for healthy living SUBSTRATE PREPARATION The substrate must be level, cured, undamaged, compact, rigid, resistant, dry and free from any deboning agents and from damp rising. All surfaces must be plumb and true to within 6 mm in 10 ft. (3m). Dry, dusty surfaces should be dampened with water & excess water should be swept off. MIXING Add 3 – 3.5 parts of powder to 1 part of water or 5 – 6 liter water for 20 Kg powder in a clean mixing vessel. Adjust the water as per desired consistency. Mix with a suitable mechanical stirrer or slow speed drills (50 – 100 rpm) until a lump free homogeneous paste is obtained. Leave mixture for 5 minutes before use. APPLICATION Apply adhesive to the substrate with the flat side of the trowel. Comb on additional adhesive with the notched side. Use the proper sized notched trowel to ensure full bedding of the tile. Tiles must be fixed within 15-20 minutes of adhesive being applied, depending on the porosity of the surface and atmospheric conditions. Leave no voids behind tiles. For large size tiles or irregular surfaces, adhesive can additionally be buttered on the backs of the tiles to ensure full adhesive contact. Use suitable support along with adhesive for fixing tiles on vertical surfaces. Clean off surplus adhesive from the tile face and between joints.

Number Of Flower : Tile Adhesives

Application : Tile-on-tile Applications On Floor

Material : Cement-based

Coverage Estimates: Coverage approx. 2.75 – 3 sq. ft. / per kg with 3 mm thickness. Pack size Coverage 20 kg approx. 55-60 sq. ft. and with Pack size 30 kg approx. 80-90 sq. ft. using a 6 mm × 6 mm square notch trowel. Note: Coverage will depend on the nature and flatness of the surface and the method of application. For good coverage, it is must that all surfaces are smooth, plumb, level and free from defects and undulations. Application Areas: : Interior Floor, Interior Walls (Up to any height), Tile on Tile applications on floor and wall, Exterior floor and wall, dry & wet area like spa, fountains, swimming pools etc., Terraces & balconies, domestic applications, commercial applications. Tile Size: Interior and exterior Floor application – Up to any size Interior Wall application – Up to 5 ft. by 2.5 ft. Type of Tile: Ceramic, Vitrified tiles, Clay tiles, Stone, precast terrazzo, Mosaic, Large Tiles for interior applications, Low thickness slab, Tiles with porosity less than 3% for all interior applications. Bed Thickness: Up to 12 mm bed thickness. Substrate: Cementitious, plastered walls, Concrete, Cement – lime mortars, Screed.

It is a 2-component cement-based waterproofing material, which is a combination of powder (fine sand, sizing), liquid (modified acrylic polymer) and nontoxic substances, environmentally friendly - free Volatile Organic Compound (VOC), with excellent waterproofing property - no leakage up to 10 m Tigonis Tigoguard 2K plus is a high-strength Acrylic Waterproofing, polymer-modified elastomeric, protective coating. This is composed of best-quality Portland cement, properly selected & graded aggregates, additives & acrylic emulsion polymer as a binder. It is applied to waterproof and protect concrete and masonry substrates. When the acrylic-modified emulsion is applied according to direction, the cured coating becomes a tough, flexible and seamless waterproof membrane and acts as an excellent water barrier to Concrete and Masonry Surfaces.

Usage/Application : Waterproof And Protect Concrete And Masonry Substrates

Environmentally Friendly : Free Volatile Organic Compound (VOC)

Tigonis Tigoguard 2K Acrylic Waterproofing Coating is an acrylic cementitious, polymer modified elastomeric, waterproofing & protective coating .This is composed of best quality Portland cement, properly selected & graded aggregates, additives & acrylic emulsion polymer as a binder. It is applied to waterproof and protect concrete and masonry substrates. When the acrylic-modified emulsion is applied according to direction, the cured coating become a tough, flexible and seamless waterproof membrane and acts as an excellent water barrier to Concrete and Masonry Surface. Description Application areas Tigonis Tigoguard 2K Acrylic Waterproofing Coating must be applied to new or old concrete substrates Waterproof coating for bathrooms, kitchen sinks, balconies, etc. Excellent as a coating for waterproofing of chhajjas, canopies, etc. Good for waterproof coating on internal sides of domestic water tanks. Waterproofing of sloped roofs. Waterproof coating for terraces areas ( 100 – 150 sqm ) Features & Benefits Easy to apply by brush Flexible and bridges cracks in concrete surfaces. Elastomeric flexible coating Provides a waterproof surface & eliminate water leakage. UV Resistance Non-Toxic Surface Preparation Surface must be clean and dry to ensure adequate adhesion. Surface must free from oil, grease, dust, loose particles and other foreign material. Cracks and voids must be filled with an appropriate Crack Filler. Any defects on surface should be repaired prior to application of membrane. Cracks due to shrinkage should be repaired with polymer modified mortar. Mixing Shake the liquid well before mixing. Add the power into the liquid portion and mix it slowly with slow speed mechanical stirrer. Continue to stir thoroughly to achieve lump free homogenous slurry. Allow the mixture to stand for 5-10 mins to release the trapped air

Number Of Flower : Acrylic Waterproofing Coating

Material : Acrylic Cementitious, Polymer Modified Elastomeric

Tigonis Rust Remover is used as cleaning agent which effectively removes rust from steel surfaces, before application of any protective coating or as a corrective/ upkeep measure. Description Application areas Tigonis Rust Remover removes rust and prevents further rusting of: ► New or old reinforcement steel in construction ► Embedded steel in repairable structures ► Removes rust from tanks, pipelines, trusses, purlins, rafters etc. ► Ball bearings, valves, hacksaws, hammers and other tools. ► Ideal for protecting rust-prone reinforcements ► Has a great domestic use advantage and can clean rusted utensils padlocks metal hinges handles, knobs, almirah and other iron based surfaces. ► Can be used in the automobile segment for rust cleaning on Car shells and other metal surfaces. Features & Benefits ►Ease of application – Ready to use, easily applicable by brush ►Penetration & effect – effective rust removal even from areas difficult to reach and penetrate ►Economical – Cost effective because of good coverage.

Name : Tigonis Rust Remover RR 101

Application : Cleaning Agent For Removing Rust From Steel Surfaces

TIGONIS READY MIX PLASTER is a ready mix cement plaster with high quality polymer additives, well graded sand and fillers for manual plastering applications. Specification: Technical parameters complies with IS 1661-1972, IS 2250- 1965, IS 2402-1963 standards. Features & Benefits: Ø Consistent quality and size Ø Crack free Ø Less curing Ø Low rebound loss Ø Smooth finish-less paint consumption Ø Easy to apply Ø Improves productivity and time Areas of Application: TIGONIS READY MIX PLASTER can be used for plastering on inner and outer walls. It can also be used e ectively on brick, block, stone walls as well as concrete surfaces. Ideal for well-prepared walls with maximum thickness of plastering up to 15 mm. Method of Application: 1) SURFACE PREPARATION Ø Prepare the surfaces before the TIGONIS READY MIX PLASTER application by removing oil, bond inhibiting agents, dirt, dust and loose surface. Ø The cleaning can be carried out with suitable methods like by using wire brush, water jetting, mopping, etc. 2) MIXING Ø TIGONIS READY MIX PLASTER requires 20-25% of water by weight of material Ø Mix TIGONIS READY MIX PLASTER to the measured quantity of water using mechanical stirring for 2-3 minutes to ensure a consistency free of lump. 3) APPLICATION Ø Apply TIGONIS READY MIX PLASTER using mortar trowels, spatula and can beapplied by normal masons as like conventional plasters Ø For thickness above 15 mm it is recommended to be applied in multiple layers

Feature : Consistent Quality, Crack-free, Low Rebound Loss, Smooth Finish

Tigonis Grout Admixture is a white synthetic polymer additive, use with cement based grouts for tile joint grouting works. Tigonis Grout Admixture is used in place of water to provide a dense, colorfast grout joint that inhibits stain causing bacteria growth and ideal for all interior and exterior grout applications. Application Tigonis Grout Admixture to be used in place of water improves the performance of cement grouts for all types of ceramic tile, brick, marble, natural stone and agglomerate stone installations Advantages ►Improves flexibility. ►Reduced water permeability: improves water resistance. ►Improves the adhesion strength. ►Suitable for Interior & Exterior. ►Easy to clean using a minimal amount of water. ►Provides a more dense and stronger Portland cement grout joint hence inhibits powdering and cracking. ►Reduces problems with faded or blotchycolour in grouts. ►Prevents damage to grouts from thermal shock. ►Improves flexibility and durability. Makes grout more shock resistant. Mixing Shake Tigonis Grout Admixture well before use. Add Tigonis Tile Grout powder to proper amount of Tigonis Grout Admixture and mix by hand or with a slow speed mixer to a smooth, stiff consistency. Shelf Life Factory sealed containers of this product are guaranteed to be of first quality for one year (12 months) if stored in normal dry condition.

Number Of Flower : Synthetic Polymer Additive

Application : Use With Cement-based Grouts For Tile Joint Grouting Works

Shelf Life : 1 Year If Stored In Normal Dry Condition

This product is composed of plasticizers, expansion additives, polymers & defoamers. It is used for administering cementitious injection grouts for pressure/gravity injection into concrete structures, for producing cementitious grouts, which are suitable for bed grouting, duct grouting, filling, etc. Areas of Application: For injection grouting in–RCC slabs, Sunken slabs RCC walls of water tanks, swimming pools Basements for waterproofing purpose Concrete Duct grouting Rock and soil anchoring Pre-placed aggregates and tunnel lining Crack ­filling in structural enforcement For structural strengthening in repairs Method of Application: CEMENTITIOUS INJECTION GROUTING. Surface Preparation: The areas that requires injection grouting should be prepared thoroughly and locations of grout must be ­ finalized. Drill hole of required size into the structure and ­ x grouting nozzle. Allow nozzle to set for 24 hours. Mixing: Take the appropriate amount of water and then add cement and mix for 3-5 minutes with a drill mixer (for small jobs) or a paddle type mortar mixer (for large jobs) at 150 – 200 rpm. Add required quantity of TIGOCRETE IG 225 and mix for another 3-5 minutes until a consistent mix is achieved.

Material : Plasticizers,Expansion Additives,Polymers,Defoamers