Clamps Dealers in Kolkata

Gripwel stainless steel clamps offers the best practical solution for chemical, food and marine industry. It also has a wide application in the automobile and engineering industry. Practical designing using advanced tooling makes them stronger than conventional clamps. Gripwel stainless steel clamps are perfectly engineered to provide non throbbing surfaces on the clamp which safeguards the hose from damages. As the perforations on the clamps are done at extended lengths, a recommended clip can be used for smaller diameters in case of emergency requirements.

This repair clamp is for quick repair of leaks or holes in pipes. The installation is fast and simple. Just snap the clamp around the pipe. Drop bolt head through open-slotted lug. Tighten the nut. Range : DN15-DN400.

Premier Souldered End Groove Clamp Coupled Fast and simple to installFoolproof jointing Corrosion proofWide range of pressure ratingsResistant to shockExceptional durabilityLowest lifetime costWidely used in developed countries for potable water supply, gas distribution, irrigation, mining and industrial Removing The Hazards Of In-Field Butt Welding The PREMIER approach is the application of logic - rather than trying to provide ideal welding conditions in the field the process is reversed and pipes are welded under ideal conditions in the factory, tested, then taken to the field. Field butt welding is always a troublesome business requiring close supervision, protection from the elements, a generating set and has low productivity. If there is a failure during testing, the repair and rewelding are particularly complicated.

Klipco is one of the leading manufacturers of hose clamps in the country. The company produces over 1, 80, 000 clamps a day in its factories which are spread across India. Klipco clamps are rigorously tested and are also ISO certified. The company offers a wide range of industrial clamps to suit every need of its customers. Screw clamps consist of a galvanized or stainless steel band into which a screw thread pattern has been cut or pressed. One end of the band contains a captive screw. The clamp is put around the hose or tube to be connected, with the loose end being fed into a narrow space between the band and the captive screw. When the screw is turned, it acts as a worm drive pulling the threads of the band, causing the band to tighten around the hose (or when screwed the opposite direction, to loosen). Screw clamps are normally used for hoses 1/2 in diameter and up, with other clamps used for smaller hoses.   Pairs of screw clamps on a short rubber unit form a “no-hub band,” often used for attaching sections of domestic wastewater piping, or used for other pipes as a flexible coupler (to fix alignment difficulties or to prevent pipe breakage due to relative movement of sections) or an emergency repair. They can also be used in a similar way, as a simple means for the transmission of small amounts of power. A short length of hose is clipped between two shafts where vibrationor variations in alignment may be taken up by the flexibility of the hose. This technique is well adapted to use for mock-ups in a development laboratory.

Bfs trefoil clamps suitable for single core cable upto 132 kv. These trefoil clamps are very much useful in laying cable in trefoil manner. Bfs trefoil clamps can be used indooroutdoor for laying single core cable in trefoil manner. These trefoil clamps are self extinguish type and have very much better results as compared to other manufacturer

Our high efficacy toggle clamps are available in Manual, Pneumatic and Hydraulic Type. We have carved a niche as the most predominant horizontal toggle clamps exporter and one of the major vertical toggle clamps manufacturers, based in India. Our toggle clamps are provided in varied types like Hold down action clamps, Straight line action clamps, Latch type clamps, Hook type clamps, Automation Clamps, Carver Clamps, Grippers, Locators etc. Our toggle clamps encompass both premium quality and long lasting excellent performance.

U-clamps are manufactured out of Nylon and can be used with all Ebco sleek Telescopic Drawer Slides. Basket clamp manufactures out of SS 304 are available in a choice of three lengths covering all Ebco kitchen baskets.

The HGC hand grip clamps are suited for the individual transport of light and thin plates. They have a jaw capacity of up to 10 mm and can lift up to 250kgs. To operate the clamp you simply press down on the hand grip which compresses a spring. This allows the clamp to open and slide onto the plate. The plate can then be lifted and transported using the ergonomically designed hand grip. The positive spring pressure prevents the plate from accidentally slipping out of the clamp. NB. Plate surface of material lifted must not exceed a hardness level of HRC 30/Brinell 300.

These products are l shaped that is why they are called l clamps. They are very light in their weight and are available at different shapes and sizes in the market. The important advantage of these products is that their body is made up of stainless steel which makes them very strong. They don’t get affected by corrosion because they have the great tendency to resist against it. The strength of these products is very high.

Features: Load Range: 1 ton to 6 tons. Safelift's Horizontal Plate Lifting Clamp is made of Low Carbon alloy Steel. Two pieces of clamp is used for testing but two or four pieces are recommended for lifting operation. Durable enduring, easy to operate.