AGNEE Gears Indraprastha Industrial Area, Kota, Rajasthan

Input power:0.067kw – 10.8kwTransmission ratio : 4 – 70 Mounting structure: foot – mounted, flange – mounted

The AGNEE Adaptable Worm Speed Reducers (gearbox) have Cast Iron Gear Case of streamlined design completely air tight, dust proof and capable of being installed in open without any cover. The Worm Shaft is made of Alloy Steel, duly hardened, tempered and ground. The Worm Wheel is made of Chill Cast Phosphorous Bronze and teeth accurately Generated on Gear Hobbing Machines. They are supported on Extra Heavy Duty Taper Roller anti friction Bearings of ample margin of safety to allow adequate journals as well as thrust loads. Lubrication is effected by splash of oil from the sump. Thus, no special care is required

Features Model in six sizes from B to G with nominal ratios of 5:1, 13:1 and 20:1 Extended 2 year warranty. Mounts direct onto the driven shaft: No alignment problems.No shaft couplings.Flexible motor mounted in a convenient position. No expensive adjustable base plate is required for the motor, as V-Belt     tensioning is done by the use of a torque arm which can be simply shortened or     extended to swing the SMSR about its output hub to tension the 'V' -Belts. Quick and easy speed changing via belt drive. Final output speed can be very accurately obtained by adjusting the 'V' -Belt'     drive ratio. High efficiency by using helical gears Single - 98% efficiency.Double - 96% efficiency. Anti-run back device can easily be fitted on site. Most SMSR use "6000" series I. S. O. plan deep groove ball bearings, stock     around the world. Double lip type oil seals used throughout. Shaft Mounted Speed Reducers can be mounted in any position. Proven history of success in all industrial applications; particularly, conveyors &     elevators in the construction industry. Long established and proven drive system. Wide range of variation available: Shaft mount, face mount, foot mount, motor mount, hydraulic input, screw conveyor adaptor. Ultra compact when compared to other designs. AGNEE offers a full comprehensive repair facility including spares availability.

Roller Chain Sprockets as per following specifications: ·  In 1/4" Pitch to 5" Pitch, for Simplex, Duplex an Triplex, Quadruple Chains ·  Outer Diameter from 25mm/1" to 1800mm/71" ·  As per British and ANSI Standard ·  In Mild Steel, Stainless Steel, Alloy Steel, Hardened and Tempered Steels, Case Hardened Steels, Induction hardened, Cast Iron, or    specified ·  For Automobiles and Industries ·  Custom made as per Specifications, Drawing or Sample Required information for quotation: ·  Material of Construction - steel, hardening and tempering required etc ·  Teeth Specification - pitch ·  Outer Diameter ·  Bore size ·  Key way size ·  Hub size ·  Any other requirement 

The AGNEE Worm Speed Reducers (gearbox) have Cast Iron Gear Case of streamlined design completely air tight, dust proof and capable of being installed in open without any cover. The Worm Shaft is made of Alloy Steel, duly hardened, tempered and ground. The Worm Wheel is made of Chill Cast Phosphorous Bronze and teeth accurately Generated on Gear Hobbing Machines. They are supported on Extra Heavy Duty Taper Roller anti friction Bearings of ample margin of safety to allow adequate journals as well as thrust loads. Lubrication is effected by splash of oil from the sump. Thus, no special care is required except for occasional oil topping to the required level. Air cooling is affected by means of standard polypropylene or metal fans. Apart from standard range, Gear Boxes are also tailor made  to suit individual requirement or as per specifications provided. They are available in   Vast range of Models suit every individual's requirement.         Available Models are:               30, 40, 50, 60, 75, 85 (Adaptable Worm Gearboxes)               75, 100, 125, 150, 175, 200, 250 (Vertical Worm Gearbox)               75, 100, 125, 150, 175, 200, 250, 300, 350, 430 (Horizontal Worm Gearbox) ·         Ratio 30:1 or 40:1 are usually available Ex-stock or on short notice ·         Center Distances from 40 mm to 400 mm ·         In Single or Double Stage Reductions ·         Ratios from 5:1 to 4900:1 ·         Also made as per customer's specifications, Drawing, requirements ·         Overhauling of Old Gear Boxes also undertaken, Early delivery schedules  

Agnee manufacture custom precious Gear Rack and Pinion in both Spur and Helical tooth form in steel, stainless steel , cast iron , brass , bronze, plastic, hylam etc. Heat treatment facility is also offered. Continuous length of Gear Racks up to 2500mm are possible. Agnee has a dedicated facility for preicision Gear Rack and Pinion cutting in volume ensuring quality at highly competitive prices.   Specifications of Rack and Pinion gears ·  1.0 Module/ 25 D.P. to 12 Module/2.1 D.P. ·  Face Widths up to 250 mm/9" ·  In Mild Steel, Alloy Steel, Hardened and Tempered Steels , Case carburised,  Case Hardened Steels, Cast    Iron or as specified ·  Custom made as per Specifications, Drawing or Sample ·  Automotive and Industrial use   Required information for quotation :           ·  Material of Construction – eg. Steel.           ·  Teeth Specifications – Module, pitch.            ·  Dimensions: Face Width, Length.              ·  Hardening and tempering required etc.           ·  Holding holes if any, Quantity, Any other requirement

Agnee Gears has developed Planetary Gearbox for various Industrial applications operated by Electric motor & Hydraulic motor. Agnee Gears providing customers with High Quality, Cost Effective, Power saving, Planetary gear box with wide range of power transmissions.\ Principle: Planetary Reduction Gearbox consist of an Internal toothed Ring Gear to which are set 3 Planets mounted on the Planet Carrier engaging also with the Sun Gear (Pinion) and reduced output speed is taken through Planet Carrier and Ring Gear is remain stationary. Output shaft maintaining the same direction of rotation as Input. Material Construction               1)  Graded Cast Iron Housing 2)  High tensile Steel Shafts 3)  High Tensile Alloy Steel Gears 4)  Carbon Steel Planet Carriers Salient Features: High Reduction Ratios, Power Saving, High Efficiency Long Life, Space-Saving Compactness, Higher Overload Capacity, Reliable and Trouble-Free Service, Compact and Co-Axial Sturdy, No-Self Locking Property.

Output Torque : 10 Nm to 1,450,000 Nm

Mounting Type : Flange/ Foot

Input Speed : 1440 rpm

AGNEE ‘M-Series’ Inline Helical Geared motors in Double / Triple reduction models having motorised /solid inputs are intended to satisfy all the requirements of a reliable drive for slow-speed high-torque application. Standard range of AGNEE Inline helical geared motors, available in foot-mounted and flange-mounted versions, offer un-parallel performance covering output speed graduated from 9 to 1230 rpm with motor power ratings ranging from 0.18 kW to 90 kW. The gearbox and motor built as a single unit looks stylishly compact which ultimately results smooth and silent operation in an efficient fashion. The solid input version incorporates an input solid shaft mounted on a bearing housing having dual bearings of ample capacity.   Features of Inline/Coaxial Helical Geared Motor ·  Helical Gear Units are designed for continuous duty under difficult operating conditions. ·  Gears are case carburized to a hardness of 58 - 62 HRC for durability. ·  Gear case and flanges of high strength gray cast iron. ·  Available in Foot mounted or flange mounted options Technical Data for Inline/Coaxial Helical Geared Motor ·  Input power: 0.18KW-90KW ·  Transmission ratio: 1.4-250 ·  Mounting structure: Foot-Mounted, Flange-Mounted ·  Model: M-03 to M-14

The AGNEE Helical Gearboxes Housing is usually made of Close Grain Cast Iron or Structural Steel. They are rugged, corrosion resistant and absorb shock and vibration. The Reducer Gearing is Helical type made from high quality alloy steel, hobbed, gas carburized, tempered and surface finish to class 10 AGMA quality. That leads to a very good efficiency and a quiet working condition. The shafts are from alloy steel forging or bars heat treated. Low speed shafts can be solid or hollow type. Bearings are fitted on a ground journal and are spherical roller or/ and taper roller type.   Apart from standard range, Helical Gearboxes are also tailor made to suit individual requirement or as per specifications provided. Helical Gearboxes are available in: ·    Center Distances from 175 mm to 750 mm ·    Single Stage or Multiple Stage Reduction ·   Ratio from 2:1 to 625:1 ·   Tailor-made as per Specification, Drawings or Sample  ·   For Automobile and Industrial uses ·   Teeth Size from 1 module

Apart from standard range, Helical Gearboxes are also tailor made to suit individual requirement or as per specifications provided. Helical Gearboxes are available in: Tailor-made as per Specification, Drawings or Sample, For Automobile and Industrial uses.