Control Relay Dealers

We are offering Best Automatic Power Factor Control Relays supplying company. Celec® Power Factor Relays are very easy to install and does not in any manner prove difficult to understand. Further, it is also small in size which only facilitates the ease of installation. The intelligent capacitor status indicator of this power factor controller with display is one innovative idea.

SC3L microminiature electronic time accumulator has built-in lithium battery and small overall dimensions and is used to provide time accumulation in various types of circuits.

We are offering power factor control relay. Functions: pfr 06pfr 12 is the new range of power factor regulators using on the highest technology and designed for easy and effective regulation. Regulator monitors the power system status and accurately and quickly takes decisions on the connection or disconnection of compensation stages in order to reach the preset target cos phi. Regulator´s microprocessor records system voltage and current consumption of the entire operation via instrument transformer inputs and uses these to calculate the relationship between active power and reactive power in the power system. Regulator calculates the basic harmonic factor of the active and reactive currents using the fft algorithm. Thus precise measurement and control are provided even if the current waveform is distorted by higher harmonic components. Benefits 6 or 12 steps thd measurement alarm output 4 quadrant pfc fcp system (fast computerized program), minimizes the number of onoff operations measuring cos phi, using true rms voltage and current values displays all measurements on one single display connected steps display features designed for easy and intuitive handling by the user parameter setting in run−time totally digital setting and handling technical data supply and measuring voltage: 400 vac (+15−10%), 45−65 hz current measurement circuit: ct, in 5 accuracy of current measurement: 1% accuracy of voltage measurement: 1% accuracy of cos phi measurement: +− 2%, 1 digit display: 1 line x 3 digits x 7 segments + 20 display icons output: relays, max. 250 v, 4 a, ac1 protection degree: ip 55, category iii dimensions: 144 x 144 x 62 mm

The raw material used in the manufacturing of products are tested stringently by the experts to make certain that the final product is of premium quality and free from any kind of defect. As a trustworthy organization, we store the entire lot in a secured manner in our automated and capacious warehouse. The unit is supervised by our team of experts ensuring complete security.   Details 8 Channel Relay 4 Channel Relay Thermal Relay 8 Pin Replay

Micro controller technology. Wide range of auxiliary supply: 7 V to 35Vdc. Withstands a dip to OV of auxiliary supply for second. Flush mounting Alphanumeric LCD display with keypad for ease of operation. Display and supervision of three phase mains voltages for UV, OV & unbalance.

We are offering control relays for various electrical applications. We provide these relays to the customers at reasonable prices. The relays are designed as per the international norms. features high switching power small size wide range of application 5 a switching capacity 4 poles configurationac coils 6 to 230 vac dc coils 5 to 110 vdc 1.5 kv dielectric coil to contacts au-clad contact available conform to the ce low voltage directive ul, vde, csa approved standard with led, push with arm and flag application lift-elevators moving stairs textile machines wood working machines plastic molding machines ceramic working machines.

Electrical device control ESIM251 allows to expand existing security panels and systems with GSM capabilities. Adds SMS and auto dial alerts a call is dialled and an SMS message is sent to the programed phone numbers. ESIM251 allows prerecord 10 different voice messages up to 15 sec. length each for different user and situation. It is possible to remotely control electric equipment by a call too. Easy configuration ESIM251 supports configuration through USB and SMS. There is an Eldes configuration tool for quick and easy setup. Possibility to add users and change settings later with simple short messages too. Comfortably access event logs through the Internet. Supports non GSM control panels ESIM251 can add GSM and GPRS functionality to almost any security control panel. Expand system’s capabilities with SMS alerts, automatic phone calls and Internet event logs. ESIM251 GSM has 5 inputs and 1 relay output. ESIM252 has 2 outputs. Business flexibility Up to 5 users can use one ESIM251 GSM system. It is possible to prerecord up to 10 auto dial messages. Configure ESIM251 so that different users would get alerts only important to them or about devices they are responsible for. Choose between auto call or SMS, maybe some will prefer to receive both + status alerts about auto reboots and device faults. For example: get informed when food vending machine is full of coins by getting an SMS, this will help to avoid unnecessary checking, or monitor ventilation system in your shopping center with accuracy. The system reports about electronic devices failures too

We offer Relay Control System use full for control labs. In the present unit a simulated second order system is controlled by an electronic relay. Apart from a study of the relay characteristics the experiment introduces the concept of Describing Function. Finally the phase plane method of analysis is covered in detail where the switching trajectories can be displayed on an X-Y oscilloscope. Highlights >>System with electronic relay >>Adjustable hysteresis and dead zone >>Display phase plane diagram on CRO >>Stability study by describing function method Experiments >>Study of the relay characteristics and display of the same on CRO for different values of hysteresis and dead zones. >>Study of the effect of hysteresis on system stability. Graphical analysis to predict sustained oscillations. >>Phase plane analysis of relay control system for various values of Hysteresis and Dead Zones. View the trajectory for different hysteresis and dead zone. Features and Specifications >>Simulated electronic relay using high speed IC's >>Simulated 2nd order linear plant. Facility for displaying x and x. signals >>Dead zone variable from 0-600mV >>Hysteresis variable from 0-500mV >>Built-in signal sources – Sine and Square Amplitude: 0-1V (min.) Variable Frequency: 10, 20, 40, 80, 100, 200, 400, 800 and 1000Hz >>IC regulated internal power supplies >>Literature and patch cords included >>Accessory - a dual beam CRO The experiment is complete in all respect, except a CRO.

Designed using advanced technology, the AVF Control Relay is offered by us to clients across India. The AVF Control Relay that we offer is made up of advanced technology and top-grade materials & components, making it widely demanded by the clients. These AVF Control Relays are used in varied industries for protection of 3 phase power supply working equipment against over volt, over frequency, over current, under volt, under frequency, under volt, reserve phasing and single phasing. Salient Features Of Our AVF Control Relay Based on DSP TechnologyCT Ratio ProgrammableTwo no, of Potential Free contactRS 485 Port for computer interfacingEach unit is digital addressablePassword protection setup parameterIndication-16 character, 2 lines LCDEasy to program with front panel keyDisplay of volt, current, frequency, and all set limit on LCD Our AVF Control Relay Is Useful For Control PanelMotor control CentersPower distribution panelPlant Mentoring and control systemGenets panel original equipment manufacturing (OEM) Technical Specifications Sense Voltage : R.Y.B. PhaseSense Current : R.Y.B. PhaseFrequency : 50/60 Hz  +- 3%Panel Mounting : 96*96 mmAccuracy : Class 1Dimensions : LWD (96x6x110 MM)

      NHP offers a range of control relays and timers that can be used in conjunction with a conventional automation system to switch higher loads or in stand alone applications where the only basic single function control is required.

The relays is an important primary controlelement in a control system which is beingcontrolled by an electrical signal givesadvantage of cost reduction. These systemdeliberately introduced as on - off control.Thisset up is designed to study of such relay controlsystem characteristics. The set up hassimulated relay with simulated process.Therelay : The relay controller system is representin blocks upon the panel  

In stock and ready for immediate shipment, contactors are suitable for a variety of applications like motor control, heating and ventilating, air conditioning, pumping, lifting equipment, lighting, and process power. This Electrical Control Relay is perfect for rugged industrial applications, T-Line and F-Range electrical contractors meet the requirements of steel mills, cement mills, mines, rock quarries, furnaces, cranes, and hoists. Definite purpose contactors are used in industrial electrical equipment including HVAC, refrigeration, and food processing.

We are offering general control relay. as a trusted general control relay supplier from india, we offer high-end components that are manufactured by experts. Widely demanded by clients all over india, our general control relays are known for their performance along with their long service life. variants emfemi-1pemi-2pemlemrezezigcjgjgsagszgz/gzt key features power consumption is lesserprotected constructionquick terminal availablehigh contact capacityeconomical download the file for moretechanical specifications

We are offering control relay. Common options available for all ratings: 6, 9, 12 a control circuits available: ac, dc, low-consumption dc, silent applications: 2.2 kw, 4.5 kw, 5.5 kw in ac3 and ac4 connectors: screw clamp, faston connectors, spring terminals, pins for printed circuit boards

We offer Relay Control System use full for control labs. In the present unit a simulated second order system is controlled by an electronic relay. Apart from a study of the relay characteristics the experiment introduces the concept of Describing Function. Finally the phase plane method of analysis is covered in detail where the switching trajectories can be displayed on an X-Y oscilloscope. >>Highlights System with electronic relay Adjustable hysteresis and dead zone Display phase plane diagram on CRO Stability study by describing function method >>Experiments Study of the relay characteristics and display of the same on CRO for different values of hysteresis and dead zones. Study of the effect of hysteresis on system stability. Graphical analysis to predict sustained oscillations. Phase plane analysis of relay control system for various values of Hysteresis and Dead Zones. View the trajectory for different hysteresis and dead zone. >>Features and Specifications Simulated electronic relay using high speed IC’s Simulated 2nd order linear plant. Facility for displaying x and x. signals Dead zone variable from 0-600mV Hysteresis variable from 0-500mV Built-in signal sources – Sine and Square Amplitude: 0-1V (min.) Variable Frequency: 10, 20, 40, 80, 100, 200, 400, 800 and 1000Hz IC regulated internal power supplies Literature and patch cords included Accessory - a dual beam CRO The experiment is complete in all respect, except a CRO.

Contact protection relays are used in type 821 contact devices. They increase the switching reliability and switching capacity of electromechanical contact devices and lower their contact voltage. Undesired switching operations of contact devices caused by vibrations are significantly reduced by a drop-out delay of 0.5 sec. On the side of the contact they operate with a lower control voltage, however, on the output side they can be highly loaded. Contact protection relays consist of a power supply unit, control unit, switching amplifier and relay output. The contacts are supplied by a control unit with 35 to 40 V clocked DC (i.e. only every hundredth switching occurs under voltage). This enables the optimum contact protection and switching reliability for millions of switching cycles.