Control Transformers Dealers

(316 products available)
  • Premium
    Potential Control Transformer

    Potential Control Transformer

    Get Price Quote

    • MOQ20 Piece
    • Frequency50 Hz ± 5%
    • System Voltage415 V / 800 V (as Applicable)
    • StandardIS: 3156 / IEC 61869
    • Country of OriginIndia
    • Primary Voltage Options- 415 V (Single Phase) - 415 V (Two Phase) - 800 V (Three Phase, Star or Delta)
    • Secondary Voltage Options230 V - 110 V
    • Vector Group / Connection- Single Phase: 415 / 230 V - Two Phase: 415 / 110 V - Star–Delta: 800 / 230 V - Delta–Star: 800 / 1
    • Solar ApplicationControl Transformer 800 V input, output as per requirement (typically 230 V / 110 V)
    • Accuracy Class (for PT)Class 0.5 / Class 1.0 (as per requirement)
    • Burden (for PT)25 VA / 50 VA (as specified)
    • Insulation LevelAs per IS / IEC standards
    • ConstructionResin Cast / Dry Type, Vacuum Impregnated
    • TerminalsElectrolytic copper, screw / stud type with cover
    • CoolingNatural Air Cooled (AN)
    • Ambient Temperature–10°C to +55°C
    • MountingPanel / Base mounting suitable
    • Enclosure ProtectionIP 20 / IP 23 (as per requirement)
    • Service ConditionsIndoor, suitable for tropical climate
    • MarkingsAs per IS / IEC (Ratio, VA, Class, Serial No., Year, IS marking)
    • Routine & Type TestsAs per IS: 3156 (Polarity, Ratio, Burden, Accuracy, Dielectric, Insulation resistance, etc.)
    • The Potential / Control Transformer is designed to step down voltage for metering, protection, and control conforms to IS: 3156 and IEC 61869 standards for reliable and accurate performance.Suitable for 415 V / 800 V systems, with primary and secondary options of 415 V / 230 V or 800 V / 110 V.The vector group configuration includes Star–Star (800/230 V) and Delta–Star (800/110 V).It operates at 50 Hz ±5% frequency with an accuracy class of 0.5 or 1.0 as required.The burden rating is 25 VA or 50 VA, depending on the application.The transformer is of resin cast / dry type vacuum impregnated construction.Terminals are made of electrolytic copper with protective covers for safety and durability.Designed for indoor use, it features IP20/IP23 protection and operates in –10°C to +55°C.Each unit undergoes routine and type tests as per IS: 3156 to ensure quality and performance.
    ...more
    www
  • Premium
    Control Transformer

    Control Transformer

    Get Price Quote

    • Country of OriginIndia
    www
  • Premium
    Control Transformers

    Control Transformers

    Get Price Quote

    • Availability100-1000 Gms
    • PhaseThree
    • Frequency50Hz, 60Hz
    • Tensile Strength0-25Mpa
    • Primary VoltageUp to 750 VAC
    • Secondary VoltageUp to 750 VAC
    ...more
    www
  • Premium
    Control Transformers +2

    Control Transformers

    1,000 - 20,000 / piece

    • MOQ1 piece
    • MaterialCopper,Copper
    • FinishingPolished
    • Driven TypeElectric
    • ShapeRectangle
    • Power10-50 KW
    • Cooling TypeAir Cooled
    • Total Carbohydrate1 Year
    • Country of OriginIndia
    • Good quality product. Manufactured inhouse
    www
  • Premium
    Crane Control Transformer

    Crane Control Transformer

    1,000 - 50,000 / piece

    • MOQ10 Piece
    • Brand NamePLICARE
    • MaterialCopper
    • FinishingPolished
    • Driven TypeElectric
    • Cooling TypeAir Cooled
    • UsageIndustrial
    • Country of Origin440V/230V/24V
    • Packaging TypeWooden Box, Carton Box
    • Mounting TypeMOUNTED IN CRANE CONTROL PANEL
    • Number Of FlowerSingle Phase Control Transformer
    • PhaseThree Phase
    • Total Carbohydrate1 Year
    • Country of OriginIndia
    • Plicare Material Handling PVT LTD takes pride in offering high-quality transformers specifically designed for crane control applications. Our transformers are engineered to provide efficient and reliable power distribution, ensuring seamless operation of cranes in diverse industrial environments. Our Crane Control Transformers are meticulously crafted using superior-grade materials and cutting-edge technology to meet international quality standards.   With a focus on performance and durability, these transformers deliver stable voltage and current to control circuits, safeguarding the smooth functioning of crane control systems. As a Crane Control Transformer exporter, we understand the importance of meeting global requirements and industry standards. Our transformers undergo rigorous testing and quality checks to ensure optimal performance, reliability, and safety.
    ...more
    www
  • UPS/control Transformer

    UPS/control Transformer

    Get Price Quote

    • Number Of FlowerUPS Transformer
    • UsageInverter And Converter Circuits
    • System Voltage400V/415V And 690V
    • Range0.2kVA To 100kVA
    • Insulation ClassH (180 Deg C)
    • ComplianceIS And IEC
    • Type and Range: System Voltage 400V/415V and 690V Range from 0.2kVA to 100kVA Insulation Class H (180 deg C) Compliance with IS and IEC Features and Applications: Designed with a wide range of power ratings and high quality resulting in greater efficiency. UPS Transformers are most widely used in inverter and converter circuits.
    ...more
  • Control Transformer

    Control Transformer

    Get Price Quote

    These are specifically functional for converting a high voltage of main circuit to a lower voltage. This facilitates the sourcing of power to the control equipment that need more voltage regulation on starting as well as is not fit to be joined with the main circuit. These are idyllic for functioning in conjunction with industrial starter circuits. These are applied in stepping down the high voltage chiefly for the devices & equipment such as Inverters, Medical Equipment, Rectifier transformer, Control Panel, solenoids, DC braking as well as Drive systems and are specifically functional in Hospitals, Commercial places as well as Industries etc. We manufacture our Control Transformer with the best quality components and elements maintaining the standards set by the industry. We also, quality examine their safety and performance to ensure their reliability and faultlessness.
    ...more
  • Control Transformer

    Control Transformer

    500 - 10,000 / Piece

    • Brand NameMS
    • PhaseSingle Phase
    • Cooling TypeDry Type/Air Cooled
    • Power (VA)2000VA
    • Input Voltage750 V AC
    ...more
  • Control Transformer

    Control Transformer

    Get Price Quote

    Control Transformer are two winding transformers used for safely isolating measurement and loads from Input line. Industrial control transformer provides step down voltages, enabling control circuits to be isolated by ensuring reliable operational voltage for control and auxiliary circuits.     Control transformers are available in a variety of primary and secondary voltage combinations     from 120/240/380/400/415/440 V primary, 24/110/220 V secondary upto 10 KVA     Conductor: Electrolytic grade Copper Strips/Wires or Aluminum     Core: CRGO or CRNGO type EI or strip     Insulation Class: Class H or Class F        Input and out are terminated using bus bars or connectors on board​
    ...more
  • CONTROL ISOLATION TRANSFORMERS

    CONTROL ISOLATION TRANSFORMERS

    Get Price Quote

    Control Transformer & Line Chokes We also offer a wide range of Control Transformer, designed to balance electric supply in medium voltage switchgear Our range of Control transformer is available in both single and three phase configurations with some models capable of vertical mounting to conserve space. Single Phase & Three Phase Control/Isolation Transformers assures long life and reliable performance. Low power loss & temperature rise. Design that can withstand 25% overload and impedance less than 5% Control Transformers (From 25 VA to 5 KVA)Line Choke & Reactor (From 0.37kW to 300kW) Single Phase & Three Phase Control / Isolation Transformers assures long life and reliable performance. Low power loss& temperature rise. Designed that can withstand 25% overload andimpedance less than 5%. Technical Specification :    System voltage 415V/220V-50/60 Hz .  Primary & Secondary voltages are as per customer requirement  Type of core lamination CRNO and CRGO .  Super enamelled F class insulated copper wire  Bobbins FRP/SMC/Red Fibre .
    ...more
  • Control Transformers

    Control Transformers

    1,900 - 2,000 / Pack

    • Number Of FlowerControl Transformers
    • ApplicationEquipments Controlling
    • ConditionNew, Used
    • Automatic GradeAutomatic, Fully Automatic
    • Cooling SystemAir Cooled, Oil Cooled
    • Warrenty1yr, 2yrs
    ...more
  • Servo Controlled Voltage Stabilizer Transformer

    Servo Controlled Voltage Stabilizer Transformer

    100,000 / Piece

    • CertificationCE Certified
    • Automatic GradeAutomatic
    • FeatureAuto Cut, Easy Operate, Stable Performance
    • Country of Origin390/400 volts
    • Warranty1 year
    • Motor Capacity7.5 H.p
    • Features: Easy installation Easy operations Low energy consumption High tensile strength   The electrical motors can be affected by higher current (particularly smaller capacity motors upto 7.5 H.P.) in three ways: Higher current produces higher losses and thereby premature failure of winding Higher losses of electric motors also increase the losses of cables, switches and transformers For smooth continuous operation of motors, over load relays are usually set at 20% higher setting   Other information: These controlled voltage stabilizers are maintained at 390/400 volts, the motor will operate smoothly drawing 15 - 20% lesser current and correspondingly the relay setting can be reduced by 15 - 20% In case single phasing occurs, the relay will trip in 40-50 seconds The motor can withstand the high current Also, the relays, contactors, switch gears incorporated with the motor will be safe
    ...more
  • Control Transformer

    Control Transformer

    Get Price Quote

    we have been able to establish ourselves as a distinguished Manufacturer and Supplier of an incredible range of Electrical Panels and Boards. Our broad gamut encompasses Control Panel Boards, Automation Panel, HT Panel, LT Panel, Pump Control Panel Board and Distribution Board. These products are manufactured using high quality material at par with the latest technological developments in the market. Our range is highly appreciated for its longer functional life, low maintenance, energy efficiency, technical effectiveness, reliability and smooth operations.  
    ...more
  • Premium
    250 Va Control Transformers +2

    250 Va Control Transformers

    2,800 / no s

    • MOQ10 no s
    • Cooling TypeNatural Air Cooled
    • Power250VA
    • ColorBlack
    • ShapeRectangle
    • Driven TypeElectric
    • MaterialCopper
    • Brand NameServokon
    • Power Rating250 VA
    • Mounting StylePanel or chassis mount
    • Tensile StrengthApprox. 1.92 kg/sq mm
    • ·         Product available as per the customer requirement ·         Our product is highly appreciated by customers
    www
  • Single Phase Control Transformer

    Single Phase Control Transformer

    1,500 / Piece

    • MOQ10 Piece
    • MaterialAlluminium
    • Cooling TypeDry Type/air Cooled
    • UsageMaterial Handling
    • Country of OriginMade in India
    • Power Rating62.5 kVA
    • Type of Isolation TransformersPower Line Isolation Transformer
    ...more
  • Control Transformers +2

    Control Transformers

    Get Price Quote

    • Number Of FlowerControl Transformers
    • Country of OriginIndia
    • StandardIS, IEC and Other Standard with special enclosure available
    • ApplicationEquipments Controlling
    • ConditionNew
    • Frequency50Hz, High Frequency As Required
    • CertficationISO 9001:2008 Certified
    • Cooling SystemAir Cooled
    • Warrenty2yrs
    • Rating50 VA Upto 10KVA, on low voltage
    • Insulation ClassClass A,E,B,F,H and higher.
    • ConnectionAny vector Group-3ph
    • Low Tension range includes Control Transformers are specifically used to provide control supply voltage for the control circuits. It can be produced in Three Phase and Single Phase type with capacities up to 10 kVA. . •Resin cast type  •Tape wound type
    ...more
  • Control Transformers

    Control Transformers

    Get Price Quote

    A Control Transformer is generally used in an electrical circuit where Step up/ step down Voltages are required. Widely Step down transformers are used in power supplies and as a isolation transformers in control circuits. Designed for industrial applications where electromagnetic devices such as relays and solenoids are used, the control transformer maximizes inrush capability and output voltage regulation when electromagnetic devices are initially energized. Unique:Sturdy DesignWidely available in power ratings ranging from 2VA – Any KVAControl transformers incorporate high-quality insulating materials.Tested for total steady-state (sealed) VA, total inrush VA, and inrush load power factor. Specifications:1.Winding Turns: No preference2.All Types of Step-UP and Step-Down3.Variable and One-to-One4.Mounting/ Form Factor :No preference5.Chassis Mount, Pole Mount, H-frame Mount, PCB Mounting type.6.Phase No preference Three Phase and Single Phase7.Output Voltage No preference AC. Applications:1.Power supplies2.Battery chargers3.Control panels4.Motor control centers5.ATS Panels
    ...more
  • Single & 3-Phase Control Transformers

    Single & 3-Phase Control Transformers

    Get Price Quote

    A Control Transformer supplies power to control and / or auxiliary equipment not intended for direct connection to the main source. Control Transformers are specifically used to provide control supply voltage for the control circuits of AC motor starters i.e. starter coils, timers, indicating lamps electronics protection relays etc. Control Transformers for contractor applications have to energize the coils. It should have good regulation for surge current. Control transformers are mostly used for industrial applications where electromagnetic devices such as contractors, relays and solenoids are used. They are also used in less sensitive devices where accurate secondary low voltages are essential. The Control Transformer maximizes inrush capability and output voltage regulation when electromagnetic devices are initially energized. Control transformers are sometimes called Industrial Control Transformers, Machine Tool Transformers, or Control Power Transformers.
    ...more
  • Control Transformer

    Control Transformer

    Get Price Quote

    These are Shell Type Transformers manufactured using standard E & I laminations from Type 17 to 8 covering a range from 1 VA to 2500 VA as per IS 6297.
  • Distribution Control Transformer

    Distribution Control Transformer

    Get Price Quote

    We offer distribution control transformer. Transformers are used to step up and step down supply voltage, hence act as step down up transformer depending upon requirement, for the operation of electromagnetic devices e.g.: contactors, solenoids, relays & timers.
    ...more
  • Single Phase Control Transformer

    Single Phase Control Transformer

    Get Price Quote

    The output ratings for continuous duty are for the maximum output voltage. For lower voltage taps the permissible output with constant current must be correspondingly reduced. The output supply for an ambient temperature of maximum 45°C & altitudes upto 1000 meters above sea level. In case of continuous duty with short time loads, Control Circuit Transformers can be subjected to upto 300 contactor operations per hour with the short time loads in excess of the continuous ratings. The restaurant drop of the on - load output voltage will not exceed 5%.
    ...more
  • Control Transformer

    Control Transformer

    Get Price Quote

    We offer a wide range of Control Transformer that can be manufactured as Dry Type or Oil Immersed up to 33 kV. Control transformers are vacuum impregnated and oven-dryed, which seals the surface and eliminates moisture. We are reckoned to be one of the promising manufacturers and exporters of control transformers in India. Material used for manufacturing the transformers: copper, Core and other insulation material. Types : Step up / Step Down Control TransformerIsolation transformerAuto TransformerLightening TransformerLine /Load ReactorsRectifier TransformerCustomized TransformerNeutral Grounding TransformersEarthing Transformers All these products are available at competent prices for our customers across the globe. Uses : Used in an electronic circuit that requires constant voltage/current or VA Rating.Industrial Control Transformer is designed for industrial applications, where electromagnetic devices such as relays & solenoids are used.
    ...more
  • Control Transformer

    Control Transformer

    1,000 / Piece

    • PhaseSingle Phase
    • Packaging TypeBox
    • Power SourceElectric
    • Frequency50-60 Hz
  • Control Transformer

    Control Transformer

    Get Price Quote

    We are offering control transformer. our clients can avail highly effective control transformer. These are specially designed by our skilled and experienced professionals to balance electric supply in medium voltage switchgear. The range of our transformer find their usage in almost all the major industries industries due to their long service life. Our transformers encapsulated windings and a choice of enclosures in order to install the cabinet in harsh environmental conditions. Moreover, we provide these transformers to the clients within a stipulated time frame at industry leading price.
    ...more
  • Control Transformers

    Control Transformers

    Get Price Quote

    The Basic function of a transformer is to increase or decrease the alternating voltages in electric power applications. GPD transformers go beyond the basic functions to efficiently convert voltage, provide isolation, generate impedance in the circuit and provide safe power for industrial and medical applications. Our transformers are mainly customized products developed with customer application in mind. Being a customer focused approach, we have developed a wide customer base in various fields like Motor Drives and Controls, Plastic Processing Machinery, Textile processing Machinery, Mining Equipment, Wind turbine and Solar Inverters, Marine applications, Medical Applications, etc. Under our UL approved file no. E301764 and E302166, we manufacture control transformers of up to 40KVA. GPD also manufactures CE approved control and power transformers as per the IEC 61558 and IEC 60076 standards. General Specifications Max operating voltage : 1 kV Frequency : 50/60 Hz Protection index : IP 00 Protection class : 1 Insulation class : F Termination : Screw / Studs / Bus bars
    ...more
  • Single Phase Control Transformer

    Single Phase Control Transformer

    Get Price Quote

    Single Phase Control Transformer Our clients can avail a wide range of Single Phase Control Transformer from us. These single phase control transformers are available in different customized specifications, so as to meet the diverse requirements of the clients. The single phase control transformers offered by us are applicable in power stations, transformer stations and auxiliary plants.Features: Efficient performance Automatic voltage control Long trouble free performance
    ...more
  • Single Phase Control Transformer

    Single Phase Control Transformer

    Get Price Quote

    a single phase control transformer is a transformer witch supplies power to control and or auxiliary equipment not intended for direct connection to the main circuit. control transformers are specifically used to provider control supply voltages for the control circulate of ac motor starters. in addition we also manufacture a range of general power transformers. these can be of the single, phase version or the 3 phase version with capacities from 1 kva to 10 kva. features: durable easy operation longer service life.
    ...more
  • Single Phase Control Transformer

    Single Phase Control Transformer

    2,700 / Piece

    • Cooling TypeDry type/Air cooled
    • Input Voltage220-240 V
    • Phase2PHASE 
    • Humidity95%
    • Brand NameNEW GOLD
    • ApplicationIndustrial
    • Power SourceElectricity
    • Frequency50-60 Hz
    • Ambient Temperature0 to 50 Degree Celsius
    ...more
  • Control and Isolation Transformers

    Control and Isolation Transformers

    Get Price Quote

    Designed to protect equipments from surge and spikes, our transformers can be used with modern sophisticated micro processor based equipment and are practically maintenance free! There are two kinds of Isolation Transformers: Shielded type Isolation Transformer Ultra Isolation Transformer Key features High efficiency, high reliability and accuracy. Compact, rugged in construction, free standing, floor mounting model and housed in sturdy metal casing with sufficient ventilations. Double wound with copper conductor with low coupling capacitance to isolate the voltage spikes and noise from the mains. High insulation values. Suitable for use with modern sophisticated micro processor based equipment, CNC machines, computers and other Industrial processing. Supply and outgoing terminals brought out with proper brass bolts and double nuts and washers under sheet secured cover with proper marking. The main body of the equipment shall have double earth arrangement. To withstand the ambient temperature up to 55 centigrade and 95% humidity. Transformers shall be provided with rating plate giving the details. No spare required for 2 years of normal operation. SPECIFICATIONS Isolation resistance shall be greater than 1000 M. Ohms at 500 V DC. The transformer regulation shall be less than 7.5% Noise/Spike suppression shall be more than 135 db. The magnetizing current shall be less than 10% of the full current load. The transformer shall in general meet IS: 2026. The transformer is provided with one electrostatic shield between the primary and the secondary. APPLICATIONS It can be used where there are spikes and noises in main supply system. It is suitable to protect sophisticated micro processor based equipments, CNC machines and computer laboratories.
    ...more
  • Control Power Transformer

    Control Power Transformer

    3,500 / Piece

    • MOQ1 Piece
    • Power1VA - 1000 KVA
    • Phase1 Phase / 3 Phase
    • BrandElectroMagnetic Devices
    • Country of OriginMade in India
    • Usage/ApplicationIndustrial
    • Cooling TypeDry type/Air cooled
    • Frequency50Hz - 200KHz
    • HumidityUpto 98% RH
    ...more
Filter by City
top