Rajeev Engineering Co. Industrial Area A, Ludhiana, Punjab

For easy, economical installation and an exceptionally smooth joint, choose the RECO Steel Belt Lacing. Lacing is available in continuous lengths to fit any belt width and the onepiece design provides uniform tension across the full belt width. The one-piece fastener strip also ensures that there are no loose pieces to work themselves out of the belt and into the conveyed product.   Designed for belts from 1/32" (.8 mm) to 1/2" (12.5 mm), Belt Lacing installation requires no special tools, only a hammer. The lacing is secured with teeth that embed lengthwise on the belt, providing a strong, vise-like hold. Clips hold gauge rod and lacing firmly and squarely against the belt and ensures a strong, straight splice. The straight splice also helps ease hinge pin insertion. MARKET APPLOCATION Package/Parts Conveying Food/Sanitary Contact Agricultural Harvesting/Handling Recycling/Scrap Handling Wood Products

RECO Solid Plate type fasteners are manufactured in 9 sizes & are engineered to meet the demands of the toughest material handling applications. A choice of sizes accommodates belts from 3/16" (5 mm) to over 15/16" (24 mm) thick. Market Application Sand Gravel Crushed Stone Grain Coal Cement Salt   NEW PER ASSENBLED FASTENERS FOR FAST INSTALLATION Twin mounting bolts, built into each bottom plate. Piloted bolt tips for easier nut placement. Bolts preassembled with pp washer. Manual Belt Punch Manual Nut Tightner Bolt Brekers Power Belt Punch Power Wrench

To extract a broken stud or screw, drill a hole in the screw, insert the largest possible screw extractor and turn anti-clockwise. The corkscrew teeth will release the broken screw, leaving the original thread in tne hole undamaged. Drill Size 'A'-: For screw or studs of low or medium tensile strenght. Drill Size 'B'-: For screw or studs of high (75 tons/sq. in .or over ) tensile strenght.

quare Shoulder under the head Two Teeth under the bolt head to Prevent the bolts from turning while fastening the nuts. Available in Whith Worth & UNC Thred

These Fasteners are manufactured in steel as well as in malleable casting. these are most widely used fastener in the world for lap & saddle back joints Available is 1/4, 5/16, 3/8 Sizes.

Square Shoulder under the head. Flat Head & Flat Washer, Hexagonal Nut Bolt Head Specielly Designed for buckets with flat wall ( Holes Nut Recessed ) Available in UNC Thred.

They are also known as Ref 70 Bolts. Concave Head with 4 lugs in the underside to prevent rotation when tightening. Hexagon nut and Small flat washer included Available in Whitworth or Metric Thread.

All the milks shakes are as rich as home made products. All the milk shakes are designed using top quality raw materials and utmost care is taken to preserve the rich nutritive values in the same.

Special Carbide Tips. No need to Sharp the Tips. Hardened & Tempered. Specialised Crome or Zinc Plating. Available in Size 1/8 to 1" in standard & 12" length. Allenkey in Pouch & Pipe Packing. Usage:- Bricks, Plaster, Stone & Concrete.  

hese Hex Key Wrenches and allen keys are manufacturers out of high Gade Alloy Steel. Hardness of 50 HRC done as per international standard for High Torsional Strength. Available in Black oxide finish along with the protective coating of rust preventive oil. Available in size 1.5mm to 32mm & 1/16 to 1". Available in loose packing as well as sets. Allenkey Sets are available in pouch packing and in plastic holder with blister packing in option of 10 Pcs. or 8 Pcs. Set. Also Available T-Handle Type Allenkeys.

these hex key wrenches and allen keys are manufacturers out of high gade alloy steel. hardness of 50 hrc done as per international standard for high torsional strength. available in black oxide finish along with the protective coating of rust preventive oil. available in size 1.5mm to 32mm & 116 to 1". available in loose packing as well as sets. allenkey sets are available in pouch packing and in plastic holder with blister packing in option of 10 pcs. or 8 pcs. set.

LIGHT DUTY FASTENER These fasteners can be used for belting of varing thickness. it also suitable for leather, hair, balata, cooton & rubber belting etc. Special parallel groves are engraved on the plates Which improve the fasteners lasting & very effective for heavy work.

For Steel Buckets With Recessed Hole use:- Bolt, Hexagon Nut and Large Domed Washe Large Bolt Head Diameter Fully Threaded Zinc Plated as standard or stainless Available in Metric Thred.

These are aiso Colle hutington type emery wheel dresser cutters Available in size 0, 1, 2. Made from carbon Steel Hardened & Tempreat

High Quality Diamonds. Available in any Shank Size. Ideal Tool for Dressing Wheels for Surface Grinders, Universal Grinders etc. Beautiful Chrome Finish. Moderately Priced.

Heavy Gauge steel sprike bumper designed to give better leverage & reduce operator ftigue, when falling or bucking trees. Electroplated to resist rust.

Reco marking Punches ( Steel Stamps ) are manufactured from best alloy steels. Punches are duly hardened & Tempered Hardness:- 45 HRC to 60HRC. Punches are supplied in sets & all sets sre pcked in convenient plastic boxes. Each & Every punch is marked with same number & letter. Face of the punch should be normal to face of work so that a clear impreesion is obtained. Punches Should be used on Umhardened materials. Punches are fully guranteed for quality & excellence.