Heatless AIR Dryer Dealers

Heatless air dryers or have several characteristics that could affect operating costs along with the operating of the related compressors, and thus can affect the overall efficiency of the complete compressed air system. These dryers are designed keeping in mind the best of the customer so that you can get most reliable dryers for the usage. Just a look at these dryers tells that these are simply the best and incomparable. Very low silhouette, valves and manifolds within the reach of the arm of the operator, readily available drain and fill ports and just a few differences apparent on the outside. Both internally as well as externally, each of the Heatless air dryers or desiccant type dryers model is the perfect blend of highly durable and technically advanced components and parts and innovative engineering techniques. This provides easy operation, hassle free maintenance and easy installation.

The theory behind operation of Heatless Dryers, is very simple. Chemicais which have the capacity to adsorb moisture on its surface. These adsorbents are used to dry the air. The adsorber are packed into two columns. The Cornpressed air is passed through this Column of packed adsorbent dessjcant. It is obvious that after a certain period or drying (i.e. few hours few minutes) the dessicant looses its capacjty to adsorb more moisture and hence is not capable of drying any more air, in its present Condition. The drying Capacity of the dessicant is restored by the process of regeneration.

• Size: 6x10inch, 7x12inch, 8x14Inch
• Feature: Best Grade Material, Durable, Gud Quality, Heat Resistance, Perfect Finish, Reusable, Rustproof
• Efficiency: 90%
• Warranty: 1 Year
• Max Flow: 100-150 Cfm, 150-200 Cfm
• Country of Origin: India

Tower Non-corrosive Aluminium body. Anrply sized to save heat adsorption. Stainlesssteel support screens and air diffusers. Large desiccant bed ensures sufficient contact time to produce -40°C dew point l-60°C with Molecular sieves]. Each tower is provided with pressure gauge. FilterEach dryer iseouipped with a Pre-filter to protect desiccant frorn free water contamination, dust, scales, etc., and an after-filter to avoid desiccant dust carry over.Pressure Gauge Pressure gauges on each tower for easier illustration of working of dryer. Highly reliable solenoid valves. to international standards, which acts as rnain flow and exhaust valves. ValvesCheck valves with wel I designed orifice for highly accurate purge flow

Suitable for extensive industrial usage, our Heatless Dryers are of unmatched standards. We fabricate them using the latest CAD/ CAM technologies. Therefore, our entire range is structurally reliable, dimensionally accurate, excellently finished and durable. We provide Heatless Dryer in various designs and sizes to meet varied requirements of buyers. In addition, we offer customized solutions. Buyers can get Heatless Dryer from us anytime and expect on time delivery of consignments.

We offer Heatless Type Air Dryer. Operating Principal: In Heatless Dryers, two vessel filled with desiccant are provided which cycle automatically, producing dry air continuously. In these units, wet air enters the bottom of one Vessel and passes upwards through the desiccant bed where the moisture is adsorbed. The dry air comes out from the top. A small portion of dry air is passed downwards through the desiccant bed in second vessel, which is under re-generation. Moisture laden purge air is then vented out to atmosphere. The purge loss is around 7.5% of the total air flow. At preset interval, the vessel changeover automatically, and Dry air is available continuously, without any surge. Easy Operation: This is simplest type of air dryer with Activated Alumina / Molecular Sieves drying agent. This is virtually maintenance free, fully automatic, and requires no attention for year heatless type dryers do not require any heating for re-generation and therefore are very simple in design and maintenance free. Low Operating Cost: • Due to its inherent simple design, investment in this type of dryer is the cheapest and the payback on this investment is very quickly. • Low Temperature operation reduces corrosion in tower and desiccant lasts longer. • Power requirement is 60 watt only for Solenoids Valves Operation. Capacity: • Air Capacity: 5 to 10000 NM3/Hr. • Dew Point : Up to (-) 60°C • Operating Pressure: 5 to 35 Kg/cm2g

• Weight: 100-150kg
• Voltage: 220V
• Automatic Grade: Automatic
• Power: 3-6kw
• Driven Type: Electric
• Warranty: 1 Year

We are well-established organization successfully operating from New Delhi(India); we are a reliable name in the sphere. We have hired a team of professional quality experts to carry out diverse quality tests in order to ensure zero defects at buyer's end.

Compact, light weight and durable are some of the attributes of our Heatless Air Dryers. We are an established Manufacturer of Heatless Air Dryers from Maharashtra. The Heatless Air Dryers have a capacity of 5 CFM to 100 CFM and trouble free valve design. Simple and easy to install, our Heatless Air Dryers can be wall mounted. Low power consumption, automatic and maintenance free operation make our Air Dryers the preferred choice among buyers.

• Country of Origin: Made in India
• Usage: Industrial/Food
• Dryer Type: Regenerative Desiccant Dryer
• I Deal In: New Only
• Automation Grade: Automatic

• Brand Name: Drytech
• Residual Oil: Upto 0.1 PPM
• Range: Upto 1140 SCFM flow
• Pressure: 10 Kg / cm2
• Moisture: (-)40 / (-)700C Atm. Dew Point
• Dust: 5 u
• Application: To various engineering applications where atmospheric dew point is preferred (-) 40 °C and above.

The presence of oil, moisture and dust particles in compressed air is a well known fact for industrial applications. As the technology advanced with inducation of sophisticated modern machineries working on compressed air, the usage of recommended quality class of air as per machines manufacturer or international Standard Organisation (ISO) or Pneurope recommendation has become necessary. The usage of filtered, dry air as per above recommendations results in reduced wear and tear, increased machine uptime, lower rejections, better product quality and above all considerable saving in energy.Drytech Air Drying Unit - HD series (Heatless) type offers quality class of air desired as per various recommendations for different pneumatic applications. The stationary air drying unit with negligible maintenance, lesser operating cost and longer service life is the right selection for pneumatically operated machines which needs purified compressed air.Salient Features Operating on ADSORP principle; Hence prevents entrainment of moisture in the pipe line however long is may be The most compact skid mounted unit supplied in READY FOR USE state by connecting compressed air at inlet and outlet The stationary working system and requires negligible maintenance Assured atmospheric dew point equal to (-) 40 deg. C. or (-) 70 deg C as required Ideal purging as per desiccant manufacturers instruction for regeneration Lesser pressure drop in total unit Modified purge silencer causing less noise Designed for Indian atmospheric condition Easy for installation and commissioning Sequence of Drying Operation : It is as per following three stagesPrefiltration : The dust particles, condensed oil and moisture in liquid droplets and aerosol from is per-filtered by set of pre-fine filter combination, The Compressed air with only vapourised from of moisture is permitted to enter the desiccant bed tower.Drying : The Saturated Compressed air is dried in desiccant bed tower.Postfiltration : The dry compressed air is refiltered in after filter for removal of residual fine particles if any.Operation : The complete ADU operates in following three modes.Drying Mode : The wet saturated compressed air coming from set of pre filters is led through one of the inlet valve (Operated by electronic timer) to the desiccant bed tower. The highly hygroscopic desiccant bed with sufficient air resident time due to proper velocity results in absorbing the moisture vapour and dries the air to desired level of dew point.Regeneration Mode : The small amount of dried air at almost atmospheric pressure is led through purge line to the saturated desiccant bed tower. The absorbed moisture in desiccant bed at earlier drying mode is desorbed in purged dry air and regeneration takes place.Pressurisation Mode : To avoid the pressure fluctuations at outlet of dryer, the regeneration mode tower is put in for pressurisation before it switches to drying mode. The entire operation is electronic timer controlled and automatic at various modes shown above for proper sequence and timing. The total cycle time is 10 minutes or 4 minutes as per timer selection for required dew point.

Thanks to our immense expertise in this domain that allows us to deliver nothing short of the best quality Heatless Air Dryer. In order to keep our offerings in safe and secure conditions, we have developed a storage unit and keep it updated with the defined industry standards. Features: High-Performance Advanced Technology Long Service Life

We are amongst the chief Heatless Adsorption Air Dryer Manufacturers, Importers and Suppliers based in India. Our Heatless Adsorption Air Dryer is based upon the natural phenomenon of �Desiccant�, which allows establishing equilibrium with the surroundings. In Heatless Adsorption Air Dryer, wet Air (fluid) is cycled automatically between two desiccant towers. One tower adsorbs the moisture from the wet fluid, while the other being regenerated. The wet fluid enters the first tower and it passes through the desiccant bed where the saturated moisture is absorbed. Afterwards, a small portion of the dried air at ambient temperature and pressure is passed through the desiccant bed in the second tower for regeneration. At present interval, the towers changeover automatically and the cycle continues giving out a regular supply of fantastic dry air, which have dew points up to (-) 70oC (Atm.)

The company is a reputed Manufacturer & Supplier of Heatless Air Dryer. The Heatless Air Dryer we offer is attributed with features such as rigid construction, excellent performance, high efficiency and durability. The Heatless Air Dryer supplied by us is also compact and require very less maintenance. Clients can avail stringently quality tested Heatless Air Dryer from us at the market leading prices. Construction & Working : Moisture from compressed air / gas is removed by suitable absorption media. The principal is based on pressure swing adsorption and the operation is totally automatic and very simple. Two drying chambers are provided which keeps on changing their position according to designed cycle. While one chamber dries the air, the other gets regenerated by using a small portion of dried air, which flashes out the moisture from the absorption in previous cycle. Electro pneumatic vales are provided for total automatic changer over moisture level of 80ppm (dew point -40 dec. c) or less can be achieved.

Atmospheric Air is sucked by air Compressor which basically contains water vapour & dust. Besides, in lubricated type Air Compressors, oil is present in the air compression chamber, traces of which are present, in compressed air in Liquid / Vapour form, which condenses into a heavy gummy oil varnish.   Condensed moisture together with dust and oil in compressed air leads to emulsion formation causing following troubles: Formation of rust & scale, clogging orificies, resulting in malfunctioning of tools,    controls & instruments.Freezing in air lines causes malfunctions & damages to process Equipments. Increased resistance to flow. By corrosion of air or gas the instruments can give false reading disrupting product    quality. Rust & scale contaminates products when compressed air is used in mixing and    processing. Bubbling effect in spray painted / Powder coated items. Sluggish operation of pneumatic equipments. If the temperature of the compressed air is more then 40o C then it is necessaroy to provide AFTER COOLER which should ensure the outlet temperature of 400C. During this cooling process, some moisture condenses which is removed our from prefilter. If the Air compressor is non-lubricated type then there is no need of Activated Carbon Filter, but if the Air Compressor is lubricated type them Activated Carbon Filter before Compressed Air Dryer / heatless air dryer is must. The characteristic of Activated Carbon is to remove the oil vapour totally from the compressed air. This ensure the full life of the desiccant in Compressed Air Dryer / Heatless air dryer . The HEATLESS type Air Dryer is the simplest & Economical Air Dryer with Activated Alumina Molecular Sieves as the desiccant. The twin Absorbers of Air Dryer is filled with these desiccant and is assembled with 3-way, 2-way, control valves and interconnected pipings. The Air Dryer / instrument air dryer follows the Drying sequence of 10 minutes. Here one absorber of dessicant air dryer is under drying cycle for 5 minutes and simultaneously the other absorber of air dryer under goes for regeneration and equalization process for (4 + 1) 5 minutes respectively. The changeover of the absorber takes place with the help of sequence timer. The moistured air and regenerative air is drained out through the individual silencer of the absorbers provided at the bottom hence super Dry Air comes from the top of the Absorber & is taken to your process for your applications. During this cooling process, some moisture condenses which is removed from prefilter. Salient Features : Super Dry Air by low investment.  100% Oil & Moisture free air with Dew Point of (-) 40oC (

• Country of Origin: India
• Type: Heatless Air Dryer
• Brand Name: DAESER
• Voltage: 220V
• Condition: New
• Usage: Food Industry
• Material: MS
• Power Source: Electric
• Warranty: 1 Year
• Automatic: Automatic
• Phase: Single Phase
• Color: Grey
• Heating Media: Electric
• Finishing: Powder Coated
• Air Heating Area: Yes
• Dryer Horse Power: 10HP
• Frequency: 50-60Hz
• Max Temperature: 45 Digree
• Working Temperature: 35
• Drying Temperature: -2-20 Digree