Prompt Spray Engineers Meerut, Uttar Pradesh

  • Water Spray System

    Water Spray System

    Get Latest Price

    • MOQ50 Piece
    • ConditionNew
    • Automatic GradeAutomatic
    • Country of OriginIndia
    • FeatureBell Shaped Flanged Outlets, UPVC Branch Pipes, Clamps, Five Way Header, PVC Extension Pipe, ABS Male Threaded Coupler, Female Threaded Half Tee, End Cap, Spray Nozzles
    • ApplicationCooling System
    • SupportFlange, Nuts & Bolts, UVS PVC Flanged Tailpieces, SS Grouting Rods
    • Water Spray Height2.5 - 3.0 Meters
    • Prompt Spray Engineers is a pioneer organization in the realms of manufacturing, exporting and designing high end Industrial Spray Ponds Cooling System, Water Cooling System. Spray Pond System and Its Spares Spray Pond System we bring forth is made using lightweight and strong material. These systems have an excellent construction. Bell shaped flanged outlets on the Main Header supports UPVC Branch Pipes by Flange, Nuts & Bolts and UVS PVC Flanged Tailpieces. It reduces the entrance losses as well.UPVC Branch Pipes are supported by Clamps, which are grouted on the concrete pillars by SS grouting rods. “Five Way Header” with PVC extension pipe is connected to the Branch Pipe by ABS male threaded coupler and female threaded half Tee. Similarly all the Clusters are fitted. After the last Cluster, End Cap is used to close the UPVC Branch Pipe. All PVC Pipes and fittings are of Rigid PVC Class III (6kgf/cm2) as per IS: .Spray Nozzles should spray water from a height of 2.5 – 3.0 m from the water level working
    ...more
  • Water Spray System

    Water Spray System

    Request for Price

    50 Piece (MOQ)

    Prompt Spray Engineers is a pioneer organization in the realms of manufacturing, exporting and designing high end Industrial Spray Ponds Cooling System, Water Cooling System. Spray Pond System and Its Spares Spray Pond System we bring forth is made using lightweight and strong material. These systems have an excellent construction. Bell shaped flanged outlets on the Main Header supports UPVC Branch Pipes by Flange, Nuts & Bolts and UVS PVC Flanged Tailpieces. It reduces the entrance losses as well.UPVC Branch Pipes are supported by Clamps, which are grouted on the concrete pillars by SS grouting rods. “Five Way Header” with PVC extension pipe is connected to the Branch Pipe by ABS male threaded coupler and female threaded half Tee. Similarly all the Clusters are fitted. After the last Cluster, End Cap is used to close the UPVC Branch Pipe. All PVC Pipes and fittings are of Rigid PVC Class III (6kgf/cm2) as per IS: .Spray Nozzles should spray water from a height of 2.5 – 3.0 m from the water level working

    Condition : New

    Automatic Grade : Automatic

    Country of Origin : India

    Feature : Bell Shaped Flanged Outlets, UPVC Branch Pipes, Clamps, Five Way Header, PVC Extension Pipe, ABS Male Threaded Coupler, Female Threaded Half Tee, End Cap, Spray Nozzles

    Application : Cooling System

    ...more
    Get Best Price
  • Water Cooling Systems

    Water Cooling Systems

    Get Latest Price

    • MOQ50 Piece
    • Country of Origin220V, 440V
    • FeatureEasy To Use, Fine Finished
    • ApplicationIndustry Use
    • Automation GradeAutomatic
    • ConditionNew
    • Driven TypeElectric
    • Number Of FlowerWater Cooling Systems
    • Industrial FRP Cooling Tower
  • Water Cooling Systems

    Water Cooling Systems

    Request for Price

    50 Piece (MOQ)

    Industrial FRP Cooling Tower

    Country of Origin : 220V, 440V

    Feature : Easy To Use, Fine Finished

    Application : Industry Use

    Automation Grade : Automatic

    Condition : New

    Driven Type : Electric

    ...more
    Get Best Price
  • pp grid vacuum filter

    pp grid vacuum filter

    Get Latest Price

    • MOQ100 Piece
    • MaterialNon Woven
    • ColorWhite
    • ConditionNew
    • Filter Medium MaterialFiberglass
    • Filter TypeReturn Line Filters
    • Brand NamePrompt Spray Engineers
    • a portion of the water evaporates, carrying away heat and cooling the remaining water, which then falls back into the pond. The cooled water is collected and recirculated for reuse in the system.
    ...more
  • pp grid vacuum filter

    pp grid vacuum filter

    Request for Price

    100 Piece (MOQ)

    a portion of the water evaporates, carrying away heat and cooling the remaining water, which then falls back into the pond. The cooled water is collected and recirculated for reuse in the system.

    Material : Non Woven

    Color : White

    Condition : New

    Filter Medium Material : Fiberglass

    Filter Type : Return Line Filters

    Brand Name : Prompt Spray Engineers

    ...more
    Get Best Price
  • Sugar Mill PVC Spray Nozzles

    Sugar Mill PVC Spray Nozzles

    Get Latest Price

    • MOQ100 Piece
    • MaterialPVC
    • TypeSpray Nozzles
    • ApplicationDispersion Of Liquid Into A Spray, Liquid Distribution, Increasing Liquid Surface Area, Creating Impact Force On A Solid Surface,Based On Specific Usages
    • Widely Used ForDistributing Liquid Over An Area
    • Area Of ApplicationSugar Mill
    •  We provide to our customers the Spray Nozzles manufactured from PVC. It is a precision device that facilitates dispersion of liquid into a spray. They are widely used to distribute a liquid over an area, to increase liquid surface area, and create impact force on a solid surface. They are made according to the usages in which they would be applied.
    ...more
  • Sugar Mill PVC Spray Nozzles

    Sugar Mill PVC Spray Nozzles

    Request for Price

    100 Piece (MOQ)

     We provide to our customers the Spray Nozzles manufactured from PVC. It is a precision device that facilitates dispersion of liquid into a spray. They are widely used to distribute a liquid over an area, to increase liquid surface area, and create impact force on a solid surface. They are made according to the usages in which they would be applied.

    Material : PVC

    Type : Spray Nozzles

    Application : Dispersion Of Liquid Into A Spray, Liquid Distribution, Increasing Liquid Surface Area, Creating Impact Force On A Solid Surface,Based On Specific Usages

    ...more
    Get Best Price
  • Sugar Mill Machinery

    Sugar Mill Machinery

    Get Latest Price

    • MOQ50 Piece
    • I Deal InNew Only
    • Country of OriginIndia
    • MaterialMild Steel
    • Packaging TypeSilver
    • We are a leading Manufacturer, Exporter, and Supplier of high-quality Sugar Mill Machinery in India. Our machinery is made of durable Mild Steel, ensuring long-lasting performance. We provide new machinery only, packed securely in silver packaging. With a focus on quality and reliability, our Sugar Mill Machinery is designed to meet the needs of sugar processing industries efficiently. Trust us for top-notch machinery that is proudly made in India.
    ...more
  • Sugar Mill Machinery

    Sugar Mill Machinery

    Request for Price

    50 Piece (MOQ)

    We are a leading Manufacturer, Exporter, and Supplier of high-quality Sugar Mill Machinery in India. Our machinery is made of durable Mild Steel, ensuring long-lasting performance. We provide new machinery only, packed securely in silver packaging. With a focus on quality and reliability, our Sugar Mill Machinery is designed to meet the needs of sugar processing industries efficiently. Trust us for top-notch machinery that is proudly made in India.

    I Deal In : New Only

    Country of Origin : India

    Material : Mild Steel

    ...more
    Get Best Price
  • Sugar Centrifuge Machine

    Sugar Centrifuge Machine

    Get Latest Price

    • MOQ100 piece
    • CapacityVaries Based On Model
    • ApplicationSugar Processing
    • ColorSilver
    • MaterialStainless Steel
    • TypeCentrifuge Machine
    • PackagingStandard Packaging
    • Power SourceElectric
    • a portion of the water evaporates, carrying away heat and cooling the remaining water, which then falls back into the pond. The cooled water is collected and recirculated for reuse in the system.
    ...more
  • Sugar Centrifuge Machine

    Sugar Centrifuge Machine

    Request for Price

    100 piece (MOQ)

    a portion of the water evaporates, carrying away heat and cooling the remaining water, which then falls back into the pond. The cooled water is collected and recirculated for reuse in the system.

    Capacity : Varies Based On Model

    Application : Sugar Processing

    Color : Silver

    Material : Stainless Steel

    Type : Centrifuge Machine

    ...more
    Get Best Price
  • Spray Ponds

    Spray Ponds

    Get Latest Price

    • MOQ100 Piece
    • Power SourceManual, Battery-operated
    • Country of OriginIndia
    • UsageAgricultural Use
    • MaterialPlastic,Metal
    • WeightLightweight
    • Temperature0-10 Deg, 10-20 Deg
    • Number Of FlowerMisting Systems
    • a portion of the water evaporates, carrying away heat and cooling the remaining water, which then falls back into the pond. The cooled water is collected and recirculated for reuse in the system.
    ...more
  • Spray Ponds

    Spray Ponds

    Request for Price

    100 Piece (MOQ)

    a portion of the water evaporates, carrying away heat and cooling the remaining water, which then falls back into the pond. The cooled water is collected and recirculated for reuse in the system.

    Power Source : Manual, Battery-operated

    Country of Origin : India

    Usage : Agricultural Use

    Material : Plastic,Metal

    Weight : Lightweight

    ...more
    Get Best Price
  • Sugra Mill Spray Ponds System

    Sugra Mill Spray Ponds System

    Get Latest Price

    • MOQ50 Piece
    • ApplicationIndustrial
    • Country of OriginIndia
    • ColorWhite
    • FeatureGood Finish , Shiny Look , Heavy Duty
    • PressureI Bar
    • Water SourceSewage Water
    • Angle Of Inclination75 Degree
    • Products Information Cooling Efficiency: The extremely smooth inside surface finish brings frictional losses to practically zero. S S inserts provided at the discharge end, ensure a uniform spray and avoid deformation. Thus, the system is perfectly designed for a definite temperature drop of 10.c. to 11.c. as the microfine atomized spray created by our micro spray nozzles, offers high surface contact with the ambient air. Under computerized automation of our condensers, system can give a temperature drop up to 15.c.-16.c Highly Economical Due to the special quality of Isophthalene Engineering Polymer used as raw material micro spray nozzles, clusters are resistant to erosion and corrosion. The result longer life, compared to other systems using ordinary thermoplastics. Effect of Sunlight Our Isophthalene Engineering Spray Pond equipment, withstands the action of sunlight effortlessly, due to the special grade polymer used as raw material. Traditional spray pond systems including mist cooling need CI / PVC Tee on every civil column for installation of Five Way Cluster. We have developed a unique Five Way Cluster that can be directly screwed into F.T. console fitted on branch. This eliminates a no. of SS / MS nut bolts, jointing packing. This facilitates maintenance cleaning of nozzles etc. During off season the entire cluster can be unscrewed, each nozzle can be unscrewed even special F.T. console can be taken out for cleaning purposes. Cooling Efficiency The system is designed to suit low head spray pumps of 10/12mtr head hence power requirement at the spray station is 35% lower compared to cooling towers with induced draft fans. Gravity Flow Micro Spray Water Cooling System Gravity flow spray pond facilitates elimination of spray pumps. Condensers are installed at a height of about 22mtrs & hot water coming out of tail pipes is collected in a common header (installed at 10mtrs height from G.L.) & this header is directly connected to spray pond common header. This system is very effective & saves on power. Branch Lines are of special grade u/v resistant PVC helps reduce frictional losses. Only one flange joint at start of branch line. Main line fabricated from SS (409 / 304) ensures maintenance free life of over 15 years. Due to SS as material of construction scaling, corrosion shall be eliminated.
    ...more
  • Sugra Mill Spray Ponds System

    Sugra Mill Spray Ponds System

    Request for Price

    50 Piece (MOQ)

    Products Information Cooling Efficiency: The extremely smooth inside surface finish brings frictional losses to practically zero. S S inserts provided at the discharge end, ensure a uniform spray and avoid deformation. Thus, the system is perfectly designed for a definite temperature drop of 10.c. to 11.c. as the microfine atomized spray created by our micro spray nozzles, offers high surface contact with the ambient air. Under computerized automation of our condensers, system can give a temperature drop up to 15.c.-16.c Highly Economical Due to the special quality of Isophthalene Engineering Polymer used as raw material micro spray nozzles, clusters are resistant to erosion and corrosion. The result longer life, compared to other systems using ordinary thermoplastics. Effect of Sunlight Our Isophthalene Engineering Spray Pond equipment, withstands the action of sunlight effortlessly, due to the special grade polymer used as raw material. Traditional spray pond systems including mist cooling need CI / PVC Tee on every civil column for installation of Five Way Cluster. We have developed a unique Five Way Cluster that can be directly screwed into F.T. console fitted on branch. This eliminates a no. of SS / MS nut bolts, jointing packing. This facilitates maintenance cleaning of nozzles etc. During off season the entire cluster can be unscrewed, each nozzle can be unscrewed even special F.T. console can be taken out for cleaning purposes. Cooling Efficiency The system is designed to suit low head spray pumps of 10/12mtr head hence power requirement at the spray station is 35% lower compared to cooling towers with induced draft fans. Gravity Flow Micro Spray Water Cooling System Gravity flow spray pond facilitates elimination of spray pumps. Condensers are installed at a height of about 22mtrs & hot water coming out of tail pipes is collected in a common header (installed at 10mtrs height from G.L.) & this header is directly connected to spray pond common header. This system is very effective & saves on power. Branch Lines are of special grade u/v resistant PVC helps reduce frictional losses. Only one flange joint at start of branch line. Main line fabricated from SS (409 / 304) ensures maintenance free life of over 15 years. Due to SS as material of construction scaling, corrosion shall be eliminated.

    Application : Industrial

    Country of Origin : India

    ...more
    Get Best Price
  • Pen Condenser Nozzles

    Pen Condenser Nozzles

    678 / Piece

    • TypeSpray Nozzle
    • MaterialPrecision-engineered
    • ApplicationCondenser Cooling Systems, Spray Ponds, Heat Exchange Applications
    • DesignPen Shape
    • ShapeLong And Narrow
    • FunctionalityUniform Spray Distribution, Efficient Cooling Of Circulating Water
    • A Pen Condenser Nozzle is a precision-engineered spray nozzle designed for use in condenser cooling systems, spray ponds, and heat exchange applications. Its design resembles a pen shape — long and narrow — allowing uniform spray distribution and efficient cooling of circulating water.
    ...more
  • Pen Condenser Nozzles

    Pen Condenser Nozzles

    678 / Piece

    1 Piece (MOQ)

    A Pen Condenser Nozzle is a precision-engineered spray nozzle designed for use in condenser cooling systems, spray ponds, and heat exchange applications. Its design resembles a pen shape — long and narrow — allowing uniform spray distribution and efficient cooling of circulating water.

    Type : Spray Nozzle

    Material : Precision-engineered

    Application : Condenser Cooling Systems, Spray Ponds, Heat Exchange Applications

    ...more
    Get Best Price
  • Mist Flow Spray Ponds

    Mist Flow Spray Ponds

    Get Latest Price

    • MOQ50 Piece
    • Country of OriginIndia
    • MaterialPlastic
    • Number Of FlowerMist Spray Pumps
    • Brand NameMist Spray Nozzles
    • ShapeRound
    • Products Information Cooling Efficiency: The extremely smooth inside surface finish brings frictional losses to practically zero. S S inserts provided at the discharge end, ensure a uniform spray and avoid deformation. Thus, the system is perfectly designed for a definite temperature drop of 10.c. to 11.c. as the microfine atomized spray created by our micro spray nozzles, offers high surface contact with the ambient air. Under computerized automation of our condensers, system can give a temperature drop up to 15.c.-16.c Highly Economical Due to the special quality of Isophthalene Engineering Polymer used as raw material micro spray nozzles, clusters are resistant to erosion and corrosion. The result longer life, compared to other systems using ordinary thermoplastics. Effect of Sunlight Our Isophthalene Engineering Spray Pond equipment, withstands the action of sunlight effortlessly, due to the special grade polymer used as raw material. Traditional spray pond systems including mist cooling need CI / PVC Tee on every civil column for installation of Five Way Cluster. We have developed a unique Five Way Cluster that can be directly screwed into F.T. console fitted on branch. This eliminates a no. of SS / MS nut bolts, jointing packing. This facilitates maintenance cleaning of nozzles etc. During off season the entire cluster can be unscrewed, each nozzle can be unscrewed even special F.T. console can be taken out for cleaning purposes. Cooling Efficiency The system is designed to suit low head spray pumps of 10/12mtr head hence power requirement at the spray station is 35% lower compared to cooling towers with induced draft fans. Gravity Flow Micro Spray Water Cooling System Gravity flow spray pond facilitates elimination of spray pumps. Condensers are installed at a height of about 22mtrs & hot water coming out of tail pipes is collected in a common header (installed at 10mtrs height from G.L.) & this header is directly connected to spray pond common header. This system is very effective & saves on power. Branch Lines are of special grade u/v resistant PVC helps reduce frictional losses. Only one flange joint at start of branch line. Main line fabricated from SS (409 / 304) ensures maintenance free life of over 15 years. Due to SS as material of construction scaling, corrosion shall be eliminated.
    ...more
  • Mist Flow Spray Ponds

    Mist Flow Spray Ponds

    Request for Price

    50 Piece (MOQ)

    Products Information Cooling Efficiency: The extremely smooth inside surface finish brings frictional losses to practically zero. S S inserts provided at the discharge end, ensure a uniform spray and avoid deformation. Thus, the system is perfectly designed for a definite temperature drop of 10.c. to 11.c. as the microfine atomized spray created by our micro spray nozzles, offers high surface contact with the ambient air. Under computerized automation of our condensers, system can give a temperature drop up to 15.c.-16.c Highly Economical Due to the special quality of Isophthalene Engineering Polymer used as raw material micro spray nozzles, clusters are resistant to erosion and corrosion. The result longer life, compared to other systems using ordinary thermoplastics. Effect of Sunlight Our Isophthalene Engineering Spray Pond equipment, withstands the action of sunlight effortlessly, due to the special grade polymer used as raw material. Traditional spray pond systems including mist cooling need CI / PVC Tee on every civil column for installation of Five Way Cluster. We have developed a unique Five Way Cluster that can be directly screwed into F.T. console fitted on branch. This eliminates a no. of SS / MS nut bolts, jointing packing. This facilitates maintenance cleaning of nozzles etc. During off season the entire cluster can be unscrewed, each nozzle can be unscrewed even special F.T. console can be taken out for cleaning purposes. Cooling Efficiency The system is designed to suit low head spray pumps of 10/12mtr head hence power requirement at the spray station is 35% lower compared to cooling towers with induced draft fans. Gravity Flow Micro Spray Water Cooling System Gravity flow spray pond facilitates elimination of spray pumps. Condensers are installed at a height of about 22mtrs & hot water coming out of tail pipes is collected in a common header (installed at 10mtrs height from G.L.) & this header is directly connected to spray pond common header. This system is very effective & saves on power. Branch Lines are of special grade u/v resistant PVC helps reduce frictional losses. Only one flange joint at start of branch line. Main line fabricated from SS (409 / 304) ensures maintenance free life of over 15 years. Due to SS as material of construction scaling, corrosion shall be eliminated.

    Country of Origin : India

    ...more
    Get Best Price
  • Mist Nozzles

    Mist Nozzles

    100 - 120 / Piece

    • MaterialBrass
    • ApplicationAgriculture
    • Country of OriginIndia
    • Prompt Spray Engineers is a pioneer organization in the realms of manufacturing, exporting and designing high end Industrial Spray Ponds Cooling System, Water Cooling System. Spray Pond System and Its Spares Spray Pond System we bring forth is made using lightweight and strong material. These systems have an excellent construction. Bell shaped flanged outlets on the Main Header supports UPVC Branch Pipes by Flange, Nuts & Bolts and UVS PVC Flanged Tailpieces. It reduces the entrance losses as well.UPVC Branch Pipes are supported by Clamps, which are grouted on the concrete pillars by SS grouting rods. “Five Way Header” with PVC extension pipe is connected to the Branch Pipe by ABS male threaded coupler and female threaded half Tee. Similarly all the Clusters are fitted. After the last Cluster, End Cap is used to close the UPVC Branch Pipe. All PVC Pipes and fittings are of Rigid PVC Class III (6kgf/cm2) as per IS: .Spray Nozzles should spray water from a height of 2.5 – 3.0 m from the water level working
    ...more
  • Mist Nozzles

    Mist Nozzles

    100 - 120 / Piece

    Prompt Spray Engineers is a pioneer organization in the realms of manufacturing, exporting and designing high end Industrial Spray Ponds Cooling System, Water Cooling System. Spray Pond System and Its Spares Spray Pond System we bring forth is made using lightweight and strong material. These systems have an excellent construction. Bell shaped flanged outlets on the Main Header supports UPVC Branch Pipes by Flange, Nuts & Bolts and UVS PVC Flanged Tailpieces. It reduces the entrance losses as well.UPVC Branch Pipes are supported by Clamps, which are grouted on the concrete pillars by SS grouting rods. “Five Way Header” with PVC extension pipe is connected to the Branch Pipe by ABS male threaded coupler and female threaded half Tee. Similarly all the Clusters are fitted. After the last Cluster, End Cap is used to close the UPVC Branch Pipe. All PVC Pipes and fittings are of Rigid PVC Class III (6kgf/cm2) as per IS: .Spray Nozzles should spray water from a height of 2.5 – 3.0 m from the water level working

    Material : Brass

    Application : Agriculture

    Country of Origin : India

    ...more
    Get Best Price
  • Jet Nozzles

    Jet Nozzles

    Get Latest Price

    • MOQ50 Piece
    • MaterialPVC
    • FinishingPolished
    • ColorWhite
    • TypeJet Nozzles
    • Country of OriginIndia
    • ApplicationCondenser Cooling
    • BrandJet Nozzles For Sugar Mill Machinry
    • sugar Mill Pen Condenser Nozzles 
  • Jet Nozzles

    Jet Nozzles

    Request for Price

    50 Piece (MOQ)

    sugar Mill Pen Condenser Nozzles 

    Material : PVC

    Finishing : Polished

    Color : White

    Type : Jet Nozzles

    Country of Origin : India

    Application : Condenser Cooling

    ...more
    Get Best Price
  • Industrial Nozzles

    Industrial Nozzles

    Get Latest Price

    • MOQ50 Piece
    • MaterialMild Steel
    • FinishingPolished
    • ConditionNew
    • ApplicationIndustrial Use
    • FeatureFine Finished, Highly Durable, Light Weight, Non Breakable, Rustproof
    • Country of OriginIndia
    • Packaging TypeSilver
    • Number Of FlowerIndustrial Nozzles
    • We are a leading Manufacturer, Exporter, and Supplier of high-quality Industrial Nozzles made from Mild Steel with a polished finish. Our new Industrial Nozzles are designed for industrial use, featuring a fine finish for optimal performance. Proudly made in India, each nozzle is carefully crafted to meet the highest standards. Packaged in silver packaging, our Industrial Nozzles are ready for use. Trust us for reliable and efficient industrial nozzles that deliver exceptional results in various applications.
    ...more
  • Industrial Nozzles

    Industrial Nozzles

    Request for Price

    50 Piece (MOQ)

    We are a leading Manufacturer, Exporter, and Supplier of high-quality Industrial Nozzles made from Mild Steel with a polished finish. Our new Industrial Nozzles are designed for industrial use, featuring a fine finish for optimal performance. Proudly made in India, each nozzle is carefully crafted to meet the highest standards. Packaged in silver packaging, our Industrial Nozzles are ready for use. Trust us for reliable and efficient industrial nozzles that deliver exceptional results in various applications.

    Material : Mild Steel

    Finishing : Polished

    Condition : New

    Application : Industrial Use

    Feature : Fine Finished, Highly Durable, Light Weight, Non Breakable, Rustproof

    Country of Origin : India

    ...more
    Get Best Price
  • ETP Plant Diffuser

    ETP Plant Diffuser

    Get Latest Price

    • MaterialPvc
    • FinishingPolished
    • ColorGrey
    • FeatureDust Free, Humidity Control, Rust Proof
    • We offer a high-quality ETP Plant Diffuser made from PVC material with a polished finishing in a sleek grey color. Our diffuser is designed to be dust-free, ensuring optimal performance. As a leading Manufacturer and Supplier, we provide a reliable solution for your industrial needs.
    ...more
  • ETP Plant Diffuser

    ETP Plant Diffuser

    Request for Price

    We offer a high-quality ETP Plant Diffuser made from PVC material with a polished finishing in a sleek grey color. Our diffuser is designed to be dust-free, ensuring optimal performance. As a leading Manufacturer and Supplier, we provide a reliable solution for your industrial needs.

    Material : Pvc

    Finishing : Polished

    Color : Grey

    Feature : Dust Free, Humidity Control, Rust Proof

    ...more
    Get Best Price
  • Cooling Tower

    Cooling Tower

    Get Latest Price

    • MOQ50 Piece
    • Country of OriginIndia
    • UsageIndustrial
    • Automatic GradeAutomatic
    • ConditionNew
    • ShapeRectangle
    • Driven TypeElectric
    • FinishingPolished
    • MaterialMild Steel
    • Packaging TypeGrey
    • Number Of FlowerCooling Tower
    • We are a leading Manufacturer, Exporter, and Supplier of high-quality Cooling Towers from India. Our Industrial-grade Cooling Towers are designed in a rectangular shape with automatic grade functionality, driven by electric power. Made of polished Mild Steel, our new Cooling Towers offer efficient cooling for various industrial applications. The towers come in grey packaging and feature a sleek design with a high number of fins for optimal performance. Trust us for reliable and top-notch Cooling Tower solutions for your industrial needs.
    ...more
  • Cooling Tower

    Cooling Tower

    Request for Price

    50 Piece (MOQ)

    We are a leading Manufacturer, Exporter, and Supplier of high-quality Cooling Towers from India. Our Industrial-grade Cooling Towers are designed in a rectangular shape with automatic grade functionality, driven by electric power. Made of polished Mild Steel, our new Cooling Towers offer efficient cooling for various industrial applications. The towers come in grey packaging and feature a sleek design with a high number of fins for optimal performance. Trust us for reliable and top-notch Cooling Tower solutions for your industrial needs.

    Country of Origin : India

    Usage : Industrial

    Automatic Grade : Automatic

    Condition : New

    Shape : Rectangle

    Driven Type : Electric

    Finishing : Polished

    Material : Mild Steel

    ...more
    Get Best Price
  • Condensers

    Condensers

    60 - 60 / Paces

    • ApplicationIndustrial Use
  • Condensers

    Condensers

    60 - 60 / Paces

    Application : Industrial Use

    Get Best Price
  • Complete Spray Ponds System

    Complete Spray Ponds System

    Get Latest Price

    • Industrial UseIndustrial
    • Sugar mill Spray Pond System  mist 8way system
  • Complete Spray Ponds System

    Complete Spray Ponds System

    Request for Price

    Sugar mill Spray Pond System  mist 8way system

    Industrial Use : Industrial

    Get Best Price
  • Centrifugal Machines

    Centrifugal Machines

    Get Latest Price

    • MOQ700 piece
    • Country of OriginIndia
    • ConditionNew
    • Brand NameCentrifugal Machine S.S Nozzles
    • MaterialStainless Steel
    • ColorBlue
    • We are a leading Manufacturer, Exporter, Supplier, and Retailer of high-quality Centrifugal Machines proudly made in India. Our Centrifugal Machine S.S Nozzles are crafted from premium Stainless Steel in a sleek Blue color. These new machines are designed for efficiency and durability, ensuring top performance in various industries. Trust in our brand for reliable and innovative centrifugal solutions that meet your needs. Elevate your operations with our top-notch Centrifugal Machines, setting new standards in quality and performance.
    ...more
  • Centrifugal Machines

    Centrifugal Machines

    Request for Price

    700 piece (MOQ)

    We are a leading Manufacturer, Exporter, Supplier, and Retailer of high-quality Centrifugal Machines proudly made in India. Our Centrifugal Machine S.S Nozzles are crafted from premium Stainless Steel in a sleek Blue color. These new machines are designed for efficiency and durability, ensuring top performance in various industries. Trust in our brand for reliable and innovative centrifugal solutions that meet your needs. Elevate your operations with our top-notch Centrifugal Machines, setting new standards in quality and performance.

    Country of Origin : India

    Condition : New

    Brand Name : Centrifugal Machine S.S Nozzles

    Material : Stainless Steel

    Color : Blue

    ...more
    Get Best Price
  • ABS Five Way Cluster

    ABS Five Way Cluster

    Get Latest Price

    • Brand NameAbs cluster five way for sugar mill
  • ABS Five Way Cluster

    ABS Five Way Cluster

    Request for Price

    Get Best Price

Average Customer Rating


Good Good
30 ratings and 2 reviews

Business Rating


5 13
4 17
3 0
2 0
1 0
Write a Review

User Satisfaction


100%
Response
100%
Quality
100%
Delivery

Choose the service or product you're reviewing for this business

How would you rate the business?

What did you like and dislike?

  • Response
  • Delivery
  • Quality

Tell us about your experience?

About the Company

  • Primary Business Manufacturers
  • Secondary Business Type Exporters / Wholesale Suppliers
  • Year of Establishment 1990
  • No. of Employees 6 - 20
  • Annual Turnover Rs. 0.5 to 2.5 Crore Approx.
  • Ownership Type Individual (Sole proprietorship)

Opening Hours

  • SUN : Closed
  • MON : 9:30 AM - 6:30 PM
  • TUE : 9:30 AM - 6:30 PM
  • WED : 9:30 AM - 6:30 PM
  • THU : 9:30 AM - 6:30 PM
  • FRI : 9:30 AM - 6:30 PM
  • SAT : 9:30 AM - 6:30 PM
Products Information
MCooling Efficiency:
The extremely smooth inside surface finish brings frictional losses to practically zero. S S inserts provided at the discharge end, ensure a uniform spray and avoid deformation. Thus, the system is perfectly designed for a definite temperature drop of 10.c. to 11.c. as the microfine atomized Spray created by our micro spray nozzles, offers high surface contact with the ambient air. Under computerized automation of our condensers, system can give a temperature drop up to 15.c.-16.c
Highly Economical
Due to the special quality of Isophthalene t Engineering Polymer used as raw material mist spray nozzles, clusters are resistant to erosion and corrosion. The result longer life, compared to other systems using ordinary thermoplastics.
Effect of Sunlight
Our tIsophthalene Engineering Spray Pond equipment, withstands the action of sunlight effortlessly, due to the special grade polymer used as raw material.
Traditional Mspray pond systems including Mist cooling need CI / PVC Tee on every civil column for installation of Five Way Cluster. We have developed a unique Five Way Cluster that can be directly screwed into F.T. console fitted on branch. This eliminates a no. of SS / MS nut bolts, jointing packing. This facilitates maintenance cleaning of nozzles etc.
During off season the entire cluster can be unscrewed, each nozzle can be unscrewed even special F.T. console can be taken out for cleaning purposes.
Cooling Efficiency
The system is designed to suit low head spray pumps of 10/12mtr head hence power requirement at the spray station is 35% lower compared to cooling towers with induced draft fans.
Gravity Flow Micro Spray Water Cooling System
Gravity flow spray pond facilitates elimination of spray pumps. Condensers are installed at a height of about 22mtrs & hot water coming out of tail pipes is collected in a common header (installed at 10mtrs height from G.L.) & this header is directly connected to spray pond common hea
Read More »

Contact Information

Prompt Spray Engineers

top