Control Relay Dealers

We are offering control relays for various electrical applications. We provide these relays to the customers at reasonable prices. The relays are designed as per the international norms. features high switching power small size wide range of application 5 a switching capacity 4 poles configurationac coils 6 to 230 vac dc coils 5 to 110 vdc 1.5 kv dielectric coil to contacts au-clad contact available conform to the ce low voltage directive ul, vde, csa approved standard with led, push with arm and flag application lift-elevators moving stairs textile machines wood working machines plastic molding machines ceramic working machines.

We offer Relay Control System use full for control labs. In the present unit a simulated second order system is controlled by an electronic relay. Apart from a study of the relay characteristics the experiment introduces the concept of Describing Function. Finally the phase plane method of analysis is covered in detail where the switching trajectories can be displayed on an X-Y oscilloscope. >>Highlights System with electronic relay Adjustable hysteresis and dead zone Display phase plane diagram on CRO Stability study by describing function method >>Experiments Study of the relay characteristics and display of the same on CRO for different values of hysteresis and dead zones. Study of the effect of hysteresis on system stability. Graphical analysis to predict sustained oscillations. Phase plane analysis of relay control system for various values of Hysteresis and Dead Zones. View the trajectory for different hysteresis and dead zone. >>Features and Specifications Simulated electronic relay using high speed IC’s Simulated 2nd order linear plant. Facility for displaying x and x. signals Dead zone variable from 0-600mV Hysteresis variable from 0-500mV Built-in signal sources – Sine and Square Amplitude: 0-1V (min.) Variable Frequency: 10, 20, 40, 80, 100, 200, 400, 800 and 1000Hz IC regulated internal power supplies Literature and patch cords included Accessory - a dual beam CRO The experiment is complete in all respect, except a CRO.

To furnish the diverse requirements of our clients in the best possible manner we are involved in offering an extensive range of Electric Control Relay.

the 6md66 high-voltage bay control unit is the control unit for high voltage bays from the siprotec 4 relay series. Because of its integrated functions, it is an optimum, low-cost solution for high-voltage switch bays. The 6md66 high-voltage bay controller unit also has the same design (look and feel) as the other protection and combined units of the siprotec 4 relay series. Configuration is performed in a standardised way with the easy-to-use digsi 4 configuration tool.for operation, a large graphic display with a keyboard is available. The important operating actions are performed in a simple and intuitive way, e.g. Alarm list display or switch gear control. The operator panel can be mounted separately from the unit, if required. Thus, flexibility with regard to the mounting position of the unit is ensured. Integrated key-operated switches control the switching authority and authorisation for switching without interlocking. High-accuracy measurement ( 0.5 %) for voltage, current and calculated values p and q are another feature of the unit.   application integrated synchro-check for synchronized closing of the circuit-breaker breaker-related protection functions (breaker failure 50bf, auto-reclosure 79) automation can be configured easily by graphic means with cfc flexible, powerful measured-value processing connection for 4 voltage transformers, 3 current transformers, two 20 ma transducers volume of signals for high voltage up to 14 1 ½-pole circuit-breakers can be operated up to 11 2-pole switching devices can be operated up to 65 indication inputs, up to 45 command relays

AC & DC Mini contactor ranges from 7 to 16 Ampere For 7-16A - 4 Pole ( 3 + 1 ( NO/ NC) ) AC Coil Ranges for 7-16A Contactor – 24V to 600V(50/60 Hz) DC Coil Ranges- 12V to 250V Silver Alloys contacts for enhanced electrical life Compact in size Panel and Din rail Mounted   7-16A Accessories Aux Contacts – 4 Poles Mechanical Interlock Printed Circuit Board Link Module Wiring Module – 2 variants Surge Suppressor – RC Type, Diode Type, Varistor Type Electronic Timer – 9 Ranges

Features : Tripping with alarm Completely automatic 4 quadrant regulation Microprocessor based No over compensation during low load Continuous monitoring for defective capacitor stages   Power Factor Control Relay- FRAKO make power factor control relays are micro-processor based & advanced features with harmonic display. This can be interfaced with all types of communication protocols. Fully automatic microprocessor based and simple commissioning. Patented control characteristic - no overcompensation during low load. Measurement and monitoring of harmonics. Over current trip function - protection for capacitors. Four-quadrant regulation. Continuous monitoring for defective capacitor stages through self adjustment of control program. Zero voltage and zero current tripping with alarm signal. Manual / Automatic operation with ability to switch each individual capacitor stage ON or OFF.    

We are offering control relay. Common options available for all ratings: 6, 9, 12 a control circuits available: ac, dc, low-consumption dc, silent applications: 2.2 kw, 4.5 kw, 5.5 kw in ac3 and ac4 connectors: screw clamp, faston connectors, spring terminals, pins for printed circuit boards

TCP interface, remote control switch. 16 channel normally open/closed relay output. Support password authentication for safe control. 3 channel timing switch function in each output. Restore factory settings function.   USR-R16-T is a 16 channel break controller. Direct connect control, local LAN control, and remote control are available for your real time control and timing control. Lonhand software,which is the control software of USR-R16-T, supports five platforms from Windows,MAC,IOS,Android to Webpage.So users can easily realize remote control.

Welcome to the RS Components range of Control Relays. If you're looking to monitor temperature, voltage, current or frequency, you'll find the products within Monitoring Relays. For all of your Signal Conditioning and Conversion requirements, visit our Signal Conditioning range.

Contact protection relays are used in type 821 contact devices. They increase the switching reliability and switching capacity of electromechanical contact devices and lower their contact voltage. Undesired switching operations of contact devices caused by vibrations are significantly reduced by a drop-out delay of 0.5 sec. On the side of the contact they operate with a lower control voltage, however, on the output side they can be highly loaded. Contact protection relays consist of a power supply unit, control unit, switching amplifier and relay output. The contacts are supplied by a control unit with 35 to 40 V clocked DC (i.e. only every hundredth switching occurs under voltage). This enables the optimum contact protection and switching reliability for millions of switching cycles.

The raw material used in the manufacturing of products are tested stringently by the experts to make certain that the final product is of premium quality and free from any kind of defect. As a trustworthy organization, we store the entire lot in a secured manner in our automated and capacious warehouse. The unit is supervised by our team of experts ensuring complete security.   Details 8 Channel Relay 4 Channel Relay Thermal Relay 8 Pin Replay

  Control Relay and Instrumentation Panels to control and monitor Protection Relays and Measuring devices of 33kV and 66kV Sub Station with MIMIC diagrams.

Electrical device control ESIM251 allows to expand existing security panels and systems with GSM capabilities. Adds SMS and auto dial alerts a call is dialled and an SMS message is sent to the programed phone numbers. ESIM251 allows prerecord 10 different voice messages up to 15 sec. length each for different user and situation. It is possible to remotely control electric equipment by a call too. Easy configuration ESIM251 supports configuration through USB and SMS. There is an Eldes configuration tool for quick and easy setup. Possibility to add users and change settings later with simple short messages too. Comfortably access event logs through the Internet. Supports non GSM control panels ESIM251 can add GSM and GPRS functionality to almost any security control panel. Expand system’s capabilities with SMS alerts, automatic phone calls and Internet event logs. ESIM251 GSM has 5 inputs and 1 relay output. ESIM252 has 2 outputs. Business flexibility Up to 5 users can use one ESIM251 GSM system. It is possible to prerecord up to 10 auto dial messages. Configure ESIM251 so that different users would get alerts only important to them or about devices they are responsible for. Choose between auto call or SMS, maybe some will prefer to receive both + status alerts about auto reboots and device faults. For example: get informed when food vending machine is full of coins by getting an SMS, this will help to avoid unnecessary checking, or monitor ventilation system in your shopping center with accuracy. The system reports about electronic devices failures too

We are offering Best Automatic Power Factor Control Relays supplying company. Celec® Power Factor Relays are very easy to install and does not in any manner prove difficult to understand. Further, it is also small in size which only facilitates the ease of installation. The intelligent capacitor status indicator of this power factor controller with display is one innovative idea.