Heat Transfer Lab Equipment Dealers

Heat Transfer Lab Equipments Through Lagged Pipe a. Diameter : 50mm150mm InnerOuter (Approx.) b. Length : 450mm (Approx.) c. Material : G.I. d Quantity : 1 No. Each.. 02. Measuring Instruments a. Digital Voltmeter Range : 0 to 300 V b. Digital Ammeter & Range : 0 to 5 Amps c. Digital Temperature Indicator with Selector switch Range : Ambient to 199.9 Deg. C

The most commonly used law of Thermal Radiation is the Stefan-Boltzmann low which states that the thermal radiation heat flu emitted from a block surface (one which absorbs all the incident radiation falling on it) is proportional to the fourth power of the absolute temperature of the surface and is given by the following equation. (qA) Heat flux in WMsq. = σT = eb4 Where, T is the surface temp. which emits thermal radiation in K And Stefan – Boltzmann constant, σ=5.67 x 10-8 WM sq.—K4 eb = Emissivity power of black surface. The Stefan – Boltzmann low can be derived by integrating planks law,

Hailing from Roorkee(India), we are engaged in catering to all the customers by reaching their preferred destination. Our team of quality analysts ensures that the offered product is of unmatched standard and free from any kind of flaws.   Range: Thermal Conductivity of Metal Rod Apparatus Thermal Conductivity of Liquid Apparatus Stefan Boltzmann Apparatus Pin Fin In Natural/Forced Convection Apparatus Forced Convection From Horizontal Cylinder Apparatus Parallel Flow/Counter Flow Heat Exchanger Apparatus Counter Flow Heat Exchanger Apparatus Composite Wall Apparatus Lagged Pipe Apparatus Critical Heat Flux Apparatus Shell and Tube Heat Exchanger Apparatus Study of Drop-Wise And Film-Wise Apparatus Unsteady State of Heat Transfer Apparatus Finned Tube Heat Exchanger Apparatus Forced Drought Cooling Tower Apparatus Thermal Conductivity of Insulation Powder Apparatus Thermal Conduction of Liquid by Guarded Hot Plate Method Apparatus Natural Convection From Vertical Cylinder Apparatus Emissivity Measurement Apparatus Specific Heat of Air Apparatus Parallel Flow Heat Exchanger Apparatus Unsteady State of Heat Transfer Apparatus Composite Cylinder Apparatus Heat Conduction Apparatus Pool Boiling Apparatus Two Phase Heat Transfer Apparatus Plate Type Heat Exchanger Apparatus U Tube Finned Heat Exchanger Apparatus Vortex tube Apparatus

• Features: High performance Superior design Low power consumption User-friendly functions Used high quality raw material Economic prices

Composite Walls Apparatus We are engaged in offering high quality Composite Walls Apparatus to the esteemed customers These apparatuses are manufactured using genuine raw material, under the able guidance of our team of experts. Moreover, we make sure to timely deliver the ordered products at the customers' end, via our wide distribution network.

• Size: all
• Type: ALL
• Brand Name: all
• Country of Origin: PUNE

We are offering In our product range, we offer Heat Transfer Lab Equipments from a pin fin, Thermal conductivity of insulation slab, Stefan Boltzmann Apparatus, Heat transfer through logged pipe, Heat transfer through composite walls, Thermal conductivity of liquids, Heat transfer in forced convection, Heat transfer in natural convection, Thermal conductivity of metal rod, Heat Pipe Demonstrator, Vertical & Horizontal Condenser (steam to water), Vertical & Horizontal Condenser (water to water), Calandria Evaporator, DropwiseFilmwise Condensation Apparatus, Thermal conductivity of insulation powder, Emissivity Measurement Apparatus, Open Pan Evaporator, Shell & Tube Heat Exchanger, Heat transfer in agitated vessel, Single Effect Evaporator, ParallelCounter Flow Heat Exchanger, Unsteady State Heat Transfer Unit, Multi Effect Evaporator, Finned Tube Heat Exchanger.

• Application: Colleges
• Driven: Electric
• Color: White

1/4 HP open type belt driven compressor with motor, fan cooled condenser, fan-cooled evaporator, two check valves, two capillary tubes, reversing valve switch, filter-drier – dual flow, high pressure control, main circuit breaker, duplex receptacle, compressor switch, pilot light, evaporator fan speed control, hardware kit, cold box and courseware. The unit is supplied with a mobile storage cabinet of code-gauge furniture stock steel with 4-inch swivel rubber-tired casters. The unit is charged with R-134a HFC refrigerant.

Being one of the eminent names in the industry, we are engaged in offering Thermal Lab Equipment to our clients. Our business is located in Delhi, India. At our state of the art unit, we are well-equipped with the modern machines and tools required for manufacturing a high-quality product. We meticulously examine it on various quality norms before forwarding it to the clients. Our offered equipment is easy to install and demands the least of maintenance. It can be availed at a cost-effective rate.

High temperature chamber.Preheating temperature range ambient to + 200°C. About 25 minutes. Low temperature chamber.Pre cooling temperature range -40... To -70°C. About 120 minutes. Microprocessor based PLC controller with inbuilt memory, communication software with windows xp support, electric screw drive lifting arrangement.

Heat Transfer Lab Equipment Heat Transfer in Natural Convection, Heat Transfer in Forced Convection Apparatus, Critical Radius of Insulating Material, Heat Transfer in Agitated Vessel, Plane Finned Tube Comparator Type.

These equipments can be availed for educational purposes in school, college and university labs as well as for industrial applications. Products are shipped from well-known traders to ensure time tested quality products. The setup consists of a heater sandwiched between two sets of slabs. Three types of slabs are provided on either sides of heater, which forms a composite structure.

Determination of Emissivity of non black surface. • Study of variation of Emissivity of test plate with respect to absolute temperature. • Measurement and variation of electrical input with complete panelised instruments. • Elimination of instrumental error by using same measuring instruments for both the plates. • Digital Voltmeter, Ammeter & Temperature Indicator. Space Required : 1m. x 1m.

The experimental set up consists of metal bar, one end of which is heated by an electric heater while the other end of the bar projects inside the cooling water jacket. A cylindrical shell filled with insulating material surrounds the middle portion of the bar. The temperature of the bar is measured at different sections. Heat Input to the heater is given through variac. By varying the heat input rates, data can be obtained. Water at constant rate is circulated through the jacket and its flow rate and temperature rise is noted.

• Features: Sturdy construction, Excellent finish , Accurate measurement

The setup consists of a brass tube fitted in a rectangular duct in a vertical fashion. The duct is open at the top and bottom, and forms an enclosure and serves the purpose of undisturbed surrounding. One side of the duct is fitted with a transparent good quality Acrylic window for visualization. An electric heating element is kept in the vertical tube that in turns heats the tube surface. The heat is lost from the tube to the surrounding air by natural convection. The temperature of the vertical tube is measure by Temperature Sensors and displayed by a Digital Temperature Indicator with multi-channel switch. The heat input to the heater is measured by a Digital Ammeter and a Digital Voltmeter and is varied by a Variac. The tube surface is polished to minimize the radiation losses.

Heat transfer lab equipment These products are appreciated by the clients in domestic as well international market due to their durability, easy operations, compact designs and robust construction.

• Material: Steel,Stainless Steel
• Application: Industrial,Laboratory
• Voltage: 110V, 220V, 280V
• Automation Grade: Semi-Automatic, Fully Automatic, Manually Automatic
• Driven Type: Electric,Fuel , Hydraulic, Pneumatic
• Weight: 100-1000kg, 1000-2000kg , 2000-3000kg ,3000-4000kg , 4000-5000kg
• Warranty: 1 Year, 2 Year

Heat Transfer Through Composite Wall, Heat Transfer Through Lagged Pipe, Heat Pipe Demonstrator, Thermal Conductivity of Insulating Powder, Thermal Conductivity of Metal Rod, Thermal Conductivity of Insulating Slab, Thermal Conductivity of Liquids, Heat Transfer From a Pin-Fin.

The apparatus consists of main central heater and ring guard heater, sandwiched between the specimens. Cooling plates are provided on the either side clamped between heater and cooling plates. Ring guard heater ensured unidirectional heat from the flow through specimen.