Multimeter Dealers

Used for data (Logging, Processing, Analysis & Recording) storing offonline & transmission of data to PC in Online mode via RS232 Interface. Simultaneous viewing of 6 Rishmulti SI232 adapters in datalogger mode. Sampling rate 50ms-1Minute.128KB memory can store data upto 200,000 readings

Multifunction Process multimeter source and measure Temperature functions , Thermocouples and RTDs Frequency, ohms, mV, Voltage, current , loop power Available PC interface with software Adopt ITS 90 Temperature Scale Used 5 digit LCD display with backlight Good accuracy 0.05 %, Battery Power operated RTC for Thermocouple Calibration 4X1.5 VDC Alkaline Battery for long life

The Model UHH Universal Handheld Test Instrument is a highly versatile instrument that offers the utmost flexibility and ease of user operation by having the capacity to work with a variety of Dwyer Instruments, Inc. compatible sensing modules and probes. Additional wired and wireless probes or modules are instantly recognized by the UHH without any user reprogramming or alteration, allowing seemless sensor addition, upgrade or replacement. See the AQTI and AQTIP Series in the Dwyer Instruments, Inc. catalog or website www.dwyer-inst.com for available packages and sensors. The Universal Handheld offers a slew of features that enable a technician to quickly set up and intuitively navigate through their daily activities. Data is stored via the internal memory or separate SD card in various auto or manual logging operations. Logged files can be quickly transferred to a device through a USB cable or by a portable SD card. The display can operate in standard numerical meter mode, gage mode with analog needle, gage mode with additional passfail operation zones, and strip chart mode which enables a simplified visual tracking of the process. The four directional buttons, combined with the three soft key buttons aligning to corresponding screen functions, allow for quick navigation through the four main operation menus. The rugged plastic case with protective thermo-plastic over-mold, along with the dust-shielding rubber caps, permit the unit to handle abuse and properly withstand dusty environments. The base UHH includes an integral molded compartment that securely holds wireless modules.

Scientech 63 is a 6 12 digital multimeter with high accuracy, stability and speed. The multimeter can provides a maximum measurement speed of 45 readingssec. Scientech 63 has 0.0035% DC voltage basic accuracy, 0.01% basic resistance accuracy and other high performance. Scientech 63 has broad measurement ranges. The display of Model Scientech 63 is primarily used to display readings, along with the units and type of measurement. Annunciators located on the left, right and bottom indicate various states of operation. Product Features DC voltage : 0.1 Micro Volt to 1000V AC (RMS) voltage : 0.1 Micro Volt to 750V, 1000V Peak DC current : 10nA to 3A AC (RMS) current : 10 nA to 3 A Frequency : 5Hz to 1MHz

Perfect first meter! ? 19 Range ? 3.5 Digit ? Transistor Test ? Diode Test ? 10A DC Current ? Ideal First Meter ? Compact Size ? CAT II 500V This is a full featured meter with plug-in 4mm probes AND transistor tester. This is the ideal first multimeter, and will give years of faithful service, in fact, you will only need to replace this meter if you require a unit with very high input impedance Specifications: ? DC Voltage: 200mV, 2000mV, 20V, 200V, 1000V ? Max Input: 1000V DC -/+0.5 ? DC Amps: 200uA, 2000uA, 20mA, 200mA, 10A ? Overload Protected ? AC Volts: 200V, 750V, max input 750V rms input ? Impedance 1Meg +/-1.2% ? Resistance: 200, 2k, 20k, 200kohms, 2Mohms +/- 1.2% ? Size: 125(H) x 68(W) x 23(D) mm