Frequency Meter Dealers

The Selec MF216 Digital Panel Meters-Digital Frequency Meter which can Indicate frequency in operation of equipment, machinery, systems or processes in a wide range of industrial applications. It consists of 4 Digit, 7 segment LED display. Comprises of Input type: 1ø-2 wire with 0.01 resolution. Supply Voltage: 240V (50Hz). Features 4 digit, 7 segment LED 0.01 resolution

ZQ96 2in1 meters measure two different ranges of frequencies in the range of 45 to 450Hz. For maximum accuracy, the essential measuring range is obtained by suppressing unwanted frequency span. The meter is housed in UL94V-0 approved polycarbonate case and can be mounted in Mosaic mounting.

FEATURES   => State of Art Microcontroller Based Design.=> Super Bright Red LED Display for Clear long distance day light viewing=> Three Digit Read out with 0.01 Resolution=> Built in Transducer OptionalA) With High / Low Frequency Cutoff=> Hysterisis, Delay & Set point site selectable through front Keypad

Wavelengths And Frequencies With A Quincke Tube Multimeter For Testing Lab   NAUGRALABS LABORATORY PRODUCT NAME: WAVELENGTHS AND FREQUENCIES WITH A QUINCKE TUBE MULTIMETER FOR TESTING LAB NaugraLabs Laboratory Product Code: NLE-Export-047003 Description and Specification for Lab Tenders Wavelengths And Frequencies With A Quincke Tube Multimeter.  Principle: When a sound wave of a particular frequency is divided into two coherent components (like, for example, light waves in an interferometer experiment), and if the path of one of the component waves is altered, it is possible to calculate the wavelength of the sound wave and its frequency from the interference phenomena recorded with a microphone.   Tasks: Record the extension of a Quincke tube for given frequencies in the range 2000 Hz to 6000 Hz. Calculate the frequencies from the wavelengths determined and compare them with the given   What you can learn about: Transverse and longitudinal waves Wavelength Amplitude Frequency Phase shift Interference Velocity of sound in air Loudness Weber-Fechner law civil lab equipments manufacturers  Acoustic Testing Lab equipment manufacturers,exporters and Acoustic Testing Lab suppliers

4 in 1 display Rescaleable facility for Volt, Amps, Frequency High, Accuracy and Stability Small, Compact in size Microcontroller based design "MECO-G" has introduced a unique 4-in-1 meter for the first time. It has simultaneous measurements of Volt, Current, Frequency and Power Factor (Single Phase and three phase balanced load). This reduces the cost of using 4 separated meters and saves space on the panel. Wiring of cables is also reduced thus effecting tremendous saving in cost.

Display frequency on 6 digit display, Range of measurement from 1 Hz to 50 MHz. Sensitivity of signal 20 mV r.m.s. from 10 Hz to 1 MHz, increasing to 50 mV r.m.s. as 1 MHz and 50 MHz. Input protection to 550 V (DC + peak AC). Resolution of 0.1 Hz to 10 Hz and 100 Hz for gatings period of 1 seconds, Accuracy better than ±001% 1 least count. Uses Oven controlled crystal from internal clock. Cabinet size of 55 mm (H) x 240 mm (W) x 220 mm (D).

MFC - 4 is a new generation of digital panel meters, utilizing the latest microcontroller technology. It computers frequency by very precise cycle width time measurements, also it has an elaborate noise discrimination algorithm. The instrument can be connected by an optional RS-485 (MODBUS - RTU) output. Thus it can be used as a component of a data system. MFC- 4 is precision instrument finding applications in Power Houses, Labs, Test Benches etc. The Instrument uses very high professional grade components offering unsurpassed reliability.

Overview Accuracy and versatility makes the 6500P Series HF LCR Meters the ideal choice for many different tasks and applications in manufacturing and test. The wide range of frequency specifications means that a model can be selected that best meets application requirements and within budget. High measurement accuracy Capacitance, inductance and impedance basic accuracy is an excellent ±0.05%. Dissipation factor accuracy is ±0.0005 and the quality factor accuracy is ±0.05%. Variable drive and bias levels AC drive levels up to 1V or 20mA can be selected to evaluate components in realistic operating environments. The /D1 DC bias option provides 0 to +40V dc bias voltage and 0 to +100mA dc bias current while the /D2 option provides -40V to +40V dc bias voltage. External control The GPIB interface is used to control the instrument and read back measured values for applications such as quality control or for archiving purposes. An Ethernet interface similarly allows the instrument to be controlled and to send out data – allowing it to be integrated into many test environments. Wide range of interfaces An external monitor or projector may be connected to the instrument. The ability to provide a large screen display is invaluable in production environments or for teaching and training. Instrument control from both a keyboard and mouse is available. Any keyboard or mouse, with either PS/2 or USB interfaces, can be simply connected to provide an alternative method of instrument control and operation. Data storage and retrieval All measurement and setup data can be stored using the Ethernet interface or a USB flash memory (supplied as standard). Setup data Up to 20 instrument setups may be stored locally for each mode. Bin handling The /B1 option (non-isolated 5V) or /B2 option (isolated 24V) signals are available through a 25-way D-type connector. 10 bins can be set using absolute or percentage limits. Printer outputs Hard copy printouts can be obtained in a number of ways including direct to an HP-PCL compatible graphics printer or Epson compatible text/ticket printer. A networked HP-PCL compatible printer may also be used via Ethernet connection. Component connections Four front panel BNC connectors permit three or four terminal connections with the screens at ground potential. The 1J1011 component fixture, supplied as standard, ensures optimum performance when measuring a wide range of components of leaded components and devices. 1J1012 (2 Terminal) and 1J1014 (4 Terminal) fixtures allow connection to surface mount devices. Protection against charged capacitors High precision measuring instruments can be damaged by charged capacitors which can cause costly repairs and unacceptable downtime. All the models in the range incorporate protection against charged capacitors. Comprehensive and precise component tests at higher frequencies The 6500P series capabilities are best summarised by “Comprehensive and precise component tests at higher frequencies”. The instruments are the perfect solution for those who have demanding component measurement needs.   Key Features Precise high frequency impedance measurements Characterize components from 20 to 120 MHz Wide range of models with maximum frequencies from 5MHz (6505P) to 120MHz (65120P) 0.05% basic measurement accuracy Comprehensive measurement functions 0 to +40V DC bias voltage and 0 to 100mA DC bias Current (Option) ±40V DC bias voltage (Option) Easy to use with large TFT touch screen Clear graphic displays aids measurements Resonance Search Intuitive user interface Fully programmable over GPIB Keyboard and mouse optional control Competitively priced

Frequency meter, The use of latest technology has also made the frequency meters an ideal match to the international standards in terms of quality and efficiency. In addition to this, the buyers are also facilitated with the availability of the Digital Frequency Meters at affordable prices.

Features : > CE compliance as per latest IEC 61010-1 > 50Hz or 60Hz > AC or DC control power > LED indicators for phase identification in 3-ph meters > Plus all features of Conzerv range DM3000 / DM1000 

We are engaged in manufacturing and supplying a designer range of Frequency Meters, which are precisely engineered by our expert engineers. We develop these Frequency Meters from high grade raw materials sourced from our certified vendors. With the availability in various technical specifications these Frequency Meters are available in various measurements. Our products are widely used in various industrial and electrical purposes.

DESCRIPTION:- It is used to measure the applied frequency. Vibrating Reed Frequency meters indicate the supply frequency by means of individual reeds, when rated voltage ± 20% is applied across the terminals of the meter, the particular reed, whose natural frequency of vibration coincides with the supply frequency, vibrates with full amplitude In case the supply frequency falls midway between two reeds both the reeds vibrate, at reduced amplitude. The amplitude of vibration at the tip of reeds is high enough for a distinct indication. The instrument can be operated at 110V, 220V, or 440V. Terminal screws with washers are provided for the selected operating voltage & remaining two terminals are covered with insulated caps. In case of RFD96 and RFD144 instruments, two sets of reeds with the same scale range can be offered, giving two independent meters in one casing. This facilitates in comparing the frequency of two voltage supplies for paralleling operation FEATURES:- No vibrating parts. No aging effect. Faster response. Lighter in weight. Low power consumption No effect of external vibration Visible in dark & from distance.

We are offering frequency meters. frequency meters pointer type with inbuilt transducer are available in size 72 x 72, 96 x 96 mm suitable for 110v, 230v & 440v ac

We are offering single phase frequency meter. bdpm-f2 4 digit single phase frequency meter features: crisp, bright, flicker-free led display pre-calibrated meters latest lsi ic technology auto polarity and auto zero compact design robust terminals solid-state circuitry international styling specification: aux options a. 240vac (+-20%) b. 85-265 acdc accuracy class 0.5 display 3 â½ 4 digits 0.56" height red dimensions 96x48 cutout 92x44 96x96 cutout 92x92 mounting panel door

Frequency Meter Applications : Control Panel Motor Control Centers Distribution Panels Genset Panels Plant Monitoring Control System Frequency Meter - MF16 (48mm x 96mm) 4 digit, 7 segment LED model 0.01 resolution Frequency Meter - MF216 (72mm x 72mm) 4 digit, 7 segment LED 0.01 resolution Frequency Meter - MF316 (96mm x 96mm) 4 digit, 7 segment LED 0.01 resolution