Hydraulic Testing Machine Dealers

Load capacities: KUT (E): 100, 200, 400, 600, 1000, 2000 & 3000kN 4 column construction with excellent alignment and good shock absorption Dual test sapce design for reduced test set up time Lead screw driven crosshead to adjust test space Testing speed range: 0 to 300 mmmin Encoder based feed back for position control & display Position control resolution down to 0.01mm Servo proportional valives for precision servo control Long strokes up to 300mm

GRIP JAW TYPE   Optional “open” (C type) or “semi open” (Y type) type grip jaw. Suitable for different test intensity.   Controller   Plug In ready to use PCI control card, suits all kinds of personal computer and main board. Full digital measure and control circuit provided with Load, displacement & deformation different measuring channel. Close loop control by simply software configuration.   EW Series machine, compared with a ball screw type electric mechanical UTM, is adopting oil hydraulic power to push the piston in the oil cylinder to provide loading force. Therefore it is very suitable for making test to different metal or nonmetal materials under high toughness and hardness against extreme big loading force. By using oil pressure transducer and photoelectric encoder, the computer is timely collecting the testing parameters like loading force, stroke etc.The servo system will provide on line close loop control and constant parameters control. The test software is able to create customized testing methods and setup testing report in only a few steps. EW series is widely used in different inspection department, engineering area, universities and institutes.

UT-02-XXXX Makron Test System is a single foot print assembly with an enclosure housing controller and hydraulic power pack. The Load frame with a T-slot bed and provision to mount actuator on top may be located on the top of enclosure. These systems are available in the range, 25–50 kN and provide the flexibility to perform static and dynamic tests. These systems are easy to install and usually do not require any additional utilities such as cooling. Just plug i to the closest 15A mains socket and the system is ready for use. Standard Features Up to 100Hz cycling frequency                             Flexible operation                            25/50 kN force rating actuators            50 to 100 mm actuator stroke           Adaptable to wide range of fixtures & grips   Energy efficient pumps User friendly MTL software Single foot print assembly Frame stiffness: 600kN/mm Applications Tension/Compression/3-point bend  Fatigue crack propagation  Fracture mechanics             Room temperature tests  Low/High temperature tests  Low/High cycle fatigue (LCF/HCF)  Damping force measurements  Elastomer testing  Tension/compression/3-point bend  Ductile/brittle fracture  Threshold stress intensity

We are leading Hot/Cold Baths For Hydrostatic Pipe Pressure Testing, Manufacturers, Suppliers & Exporters Located in Dombivli Dist. Thane, Mumbai India.   Technical Specifications : → Capacity : 200 To 20,000 litrs → Temperature Range : Ambient to 95 °C. → Accuracy : +/- 0.5 °C. → Temperature controlling system :      Thyristorised power pack. (30% Power Saving). → MOC Inner : SS-304, Outer MS Powder coated. → Door opening : 3 Layers folding type. → Water level controlling : Auto + Safety. → Water circulation : With Heavy duty pump      (German make) → Supply : 440 VAC/50 Hz  

A large gamut of précised engineered Hydraulic Testing Machines is designed and manufactured by us. We are well reckoned as one of the leading hydraulic testing machines exporters from India. Wide array of hydraulic testing machines mainly includes hydraulic pressure testing machines, hydraulic test rigs for cylinders, valves, pumps & motors, air operated pressure testing units, hydraulic pressure testing machines for shell, hydro-pneumatic pressure testing machines and custom built hydraulic test rigs. Hydraulic pressure testing machines are specially designed for testing gun-barrels, hydraulic cylinders, shells etc.

NAUGRALABS LABORATORY PRODUCT NAME: SERVO HYDRAULIC UNIVERSAL TESTING MACHINE FOR TESTING LAB NaugraLabs Laboratory Product Code: NLE-Export-111015 Description and Specification for Lab Tenders Servo Hydraulic Universal Testing Machine.  Capacity: 60T (Max upto 2000kN) Single Test Frame with dual zone to conduct Tensile, Compression and flexural test. Four column load frame with dual pressure hydraulic loading system. Four Column and two screw construction to allow for a larger, more robust testing area. Extension resolution from cross head: 1micron (0.001mm) Display of force, position & strain valves (in kg/ kN/ Lbs/ Tons) Hand held controller for indicating load elongation, speed for loading and unloading in the manual mode, for pump start/stop, return, max value, crosshead up/dowm and stop. A variable sample break function to display peak values automatically, and return the crosshead. Automatic value-Hydraulic safety values (using only Parker & Bosch valves) Automatic piston zero positioned. Control System provided with closed-load control, allowing precise control of load, strain and position rates when used with test software, driven by Vfd motor for higher torque. Load Measurement & Accuracy: Load Measurement: Pressure Transducer load weighing system (capacity 400 bars) Accuracy: ±5% of the indicated load from 0.2% to 100% of capacity. Resolution : better than 1/100,000 of capacity (0.001kN) Friction free design : no oil seal for maintenance free operation (cylinder piston lapped to 2 microns finish) Basic Testing Clearances: 450- 575mm clearance between screws  850 - 1000 mm Standard Opening  750 - 850 mm maximum clearance in tension  650 - 850 mm maximum compression clearance  135 -200mm hydraulic stroke Standard Speed Ranqes: 0 to 100mm /min testing speed  250 - 350 mm/min per minute adjustable crosshead speed Speed Resolution: 0.005 - 0.02 mm/min can be improved upto 100mm/min  Steel & Metal Mechanics Lab equipment manufacturers,exporters and Steel & Metal Mechanics Lab suppliers

Hydraulic testing machine is suitable to test various metallic & non-metallic materials for tension, compression, bending and shearing strength. It is capable of testing the characters of materials on physical & technology properties. It is simple, easy to operate and widely used in factories, laboratories and high schools for material properties research and quality control. Equipped with the computer & software & printer, it can display, record, process and print the test results, and control test procedures as per the set program and can draw test curves automatically in real time.

Hydrostatic Pressure Testing Machine are used to find out the resistance internal pressure of R-PVC, C-PVC, U-PVC, MDPE, HDPE, LLDPE, PP-R pipes, Fittings, Valves etc. as per IS, BS, ASTM and other equivalent standards.

    Hydraulic testing machine suitable for stainless stell and carbon steel longitudinally welded tubes   Custom made design to suit requirements of water and gas tubes to Oil country tubes   Emphasis on : Material selection     Manufacturing & process selection     Dimensional & geometrical accuracy   Specially designed sealing arrangement for high pressure testing   PLC controlled Auto & Manual cycles   Quick changing type tooling for quick size change   Testing pressure range from 200 to 600 atmosphere   Heavy and rugged heads fabricated from tested carbon steel   Selection of Power pack and intensifier from most standard and dependable sources   Suitable for tube length ranging form 4 meters to 8 meters. Easy & quick length change through adjustable moving tailstock   Single or multi-head design to suit different production quantum requirements .