Mortar Dealers in Morbi (39 products available)

High Alumina Mortar We are counted among prominent High Alumina Mortar Manufacturers and Suppliers in India. Our High Alumina Mortars are used as joining material for laying refractory bricks. Our wide range of High Alumina Mortar is in huge demand in the national and international markets. Salient Features * Highly efficient * Offers compressive strength * Assure outstanding performance * Tested for quality Technical Specifications Products Al2O3 % (Min) Fe2O3 % (Max) Grain Size mm (Max) Sintering Temp (deg C) Service Temp (deg C) Application ARPL M - 30 30 3.0 0 - 0.5 1100 1400 General purpose moderate heat duty for lying MHD quality bricks ARPL M - 40 40 3.5 0 - 1.0 1100 1450 General purpose moderate heat duty for lying IS-8 quality bricks ARPL M - 50 50 4.0 0 - 0.5 1100 1550 General purpose air setting mortar.

Continuous casting refractory materials are in great demand these days as more and more iron and steel making companies around the world are today opting for continuous casting of steel. Galaxy Enterprise makes refractory bricks, tundish, slide gate pass, ladle slide gate, nozzle and well block, and many more refractory materials in high demand among its clients making steel through continuous casting process. This is because the refractory materials made by Galaxy Enterprise are high performing and withstand high temperatures. They also help in increasing the productivity of the steel making process and quality of the molten steel thus produced.

We bring forth an Antique Base Wall Mortar which is a new innovation for wall coating in India. Antique Base Wall Mortar, water resistant Luster wall coating, is widely used for interior as well as exterior use. Our Antique Base Wall Mortar is crack proof, weather proof and makes building components totally waterproof. We provide Antique Base Wall Mortar in standard packaging and can also provide in custom-made specifications as per buyers request.   Salient features of “Antique Wall Mortar” : Make building component Totally Water Made wall totally crackproof with high bonding. Colour resistancy as well as Weatherproofing. Use for interior as well as exterior coating. Get Luster Finish With UV Resistance and Eco friendly’’Antique Wall Mortar” Application Procedure : Remove all loosely adhering material from the wall surface with the help of emery stone, putty blade or wire brush and clean water. The substrate should be clean, free from dust, grease and loose materials. Dry and absorbent surfaces should be moistened with sufficient quantity of clean water. Mix “Antique Wall Mortar” with 60-65% clean water slowly to make paste. Continue the mixing for 10-15 minutes with putty grind machine till a uniform paste is formed. After thoroughly mixing “Antique Wall Mortar” apply the first coat with Antique base mortar on already moistened wall surface from bottom to upward direction uniformly with the help of putty blade. This would ensure less wastage and proper finish. After drying of first coat of Antique base mortar just rub the surface gently with west sponge or rub the surface very gently with the putty blade in order to remove the loose particles. Allow the surface to dry for atleast 24 hours and then apply second coat of with Antique finish mortar Leave the surface to dry completely. After drying of second coat remove marks if any with the help of moist sponge or rub the surface very gently with the putty blade. Leave the surface to dry preferably for overnight. Always prepare a required quantity of putty and use it within 2-3 hrs. of mixing with water The total thickness of the coats should be limited to maximum 1.5mm. It is not essential to rub the surface done with “Antique Wall Mortar”, however if you need to remove unevenness before applying any kind of paint/distemper, gently level the walls/ceiling surface with very fine water proof emery paper of not less that 500 number to get a glossy white surface. Precautions During Application : Mixing of “Antique Wall Mortar” is very important and hence extreme care is to be taken for proper and thorough mixing with hand or mechanical stirrer in order to get best results. “Antique Wall Mortar” should be done over fully cured surface. It is recommended not to rub “Antique Wall Mortar” strongly and harshly with rough emery paper. This breaks the film formed over “Antique Wall Mortar”, which decreases the water repellency properties. The total thickness of the coat should be limited to maximum 1.5mm. In case of fresh concrete/mortar surface it is recommended that two coats of Antique Base Mortar be apply before application of “Antique Wall Mortar”.Coverage : The coverage area of “Antique Base Wall Mortar” on smooth normal mortar wall is 25 to 30 Sq. Ft/Kg/mm The coverage area of “Antique Finish Wall Mortar” on smooth normal mortar wall is 35 to 40 Sq. Ft/Kg/mm The coverage area, however, will depend upon the quality of the substrate. Note : Generally the cause of efflorescence on the walls surface is the brick masonry, which is due to the quality of bricks, sand and water, If the effect of efflorescence on the brick masonry seems to be very high then proper care should be taken to control the efflorescence. The efflorescence problem on brick masonry if exists impairs the bonding of “Antique Wall Mortar” as is with any other product.  For High Effected efflorescence walls Contact our Customer Care for solution. Packing : “Antique Base Wall Mortar” is available in 20Kg Pack. “Antique Finish Wall Mortar” is available in 10Kg Box Pack.

With the leading market standards and customers' demands, we have developed a system that allows the clients to pay in online and offline as per their preferences. We are among the trusted names, involved in offering world-class lot of Fire Clay Mortar in the national market.

Size : o-1 mm 1-3 mm 3-5 mm

Density : 1100 kg

As a renowned Manufacturer, Supplier and Exporter of Refractory Bed Material, we bring you a wide range of immaculate quality. Our skilled professionals use only high-grade raw materials to ensure that our product meets the highest quality standards. The features such as accurate composition and effective usage make it an interesting proposition. To further add to the allure, it is available in customized specifications at cost-effective prices.

Our Mixed Mortar has supreme binding quality. Our company has a well-maintained data system that is absolutely secured and you can rely on that if you are willing to make payments online. With leading technologies, we make secured database to keep a stern check on the previous transactions. Our product range is subjected to stringent quality control procedures to ensure they are as per industry standards.

Our products are subjected to the payment terms & conditions of our company. Patrons are provided with the terms & conditions, and can make purchases with a payment method best suited for them. The offered lot is in complete compliance with the industry standards thus, high in demand.

“Antique Wall Mortar” is a water resistant Luster wall coating for interior as well as exterior use. “Antique Wall Mortar” make building components totally water proof.”Antique Wall Mortar” is totally crack proof with high bonding which gives colour resistancy as well as weather proofing. Get luster finish with UV resistance & eco friendly with high bond luster coating.   Salient features of “Antique Wall Mortar” *Make building component Totally Water *Made wall totally crackproof with high bonding. *Colour resistancy as well as Weatherproofing. *Use for interior as well as exterior coating. *Get Luster Finish With UV Resistance and Eco friendly’’Antique Wall Mortar”   Application Procedure Remove all loosely adhering material from the wall surface with the help of emery stone, putty blade or wire brush and clean water. The substrate should be clean, free from dust, grease and loose materials. Dry and absorbent surfaces should be moistened with sufficient quantity of clean water. Mix “Antique Wall Mortar” with 60-65% clean water slowly to make paste. Continue the mixing for 10-15 minutes with putty grind machine till a uniform paste is formed. After thoroughly mixing “Antique Wall Mortar” apply the first coat with Antique base mortar on already moistened wall surface from bottom to upward direction uniformly with the help of putty blade. This would ensure less wastage and proper finish. After drying of first coat of Antique base mortar just rub the surface gently with west sponge or rub the surface very gently with the putty blade in order to remove the loose particles. Allow the surface to dry for atleast 24 hours and then apply second coat of with Antique finish mortar Leave the surface to dry completely. After drying of second coat remove marks if any with the help of moist sponge or rub the surface very gently with the putty blade. Leave the surface to dry preferably for overnight. Always prepare a required quantity of putty and use it within 2-3 hrs. of mixing with water The total thickness of the coats should be limited to maximum 1.5mm. It is not essential to rub the surface done with “Antique Wall Mortar”, however if you need to remove unevenness before applying any kind of paint/distemper, gently level the walls/ceiling surface with very fine water proof emery paper of not less that 500 number to get a glossy white surface.   Precautions During Application Mixing of “Antique Wall Mortar” is very important and hence extreme care is to be taken for proper and thorough mixing with hand or mechanical stirrer in order to get best results. “Antique Wall Mortar” should be done over fully cured surface. It is recommended not to rub “Antique Wall Mortar” strongly and harshly with rough emery paper. This breaks the film formed over “Antique Wall Mortar”, which decreases the water repellency properties. The total thickness of the coat should be limited to maximum 1.5mm. In case of fresh concrete/mortar surface it is recommended that two coats of Antique Base Mortar be apply before application of “Antique Wall Mortar”.   Coverage The coverage area of “Antique Base Wall Mortar” on smooth normal mortar wall is 25 to 30 Sq. Ft/Kg/mm The coverage area of “Antique Finish Wall Mortar” on smooth normal mortar wall is 35 to 40 Sq. Ft/Kg/mm The coverage area, however, will depend upon the quality of the substrate.   Note Generally the cause of efflorescence on the walls surface is the brick masonry, which is due to the quality of bricks, sand and water, If the effect of efflorescence on the brick masonry seems to be very high then proper care should be taken to control the efflorescence. The efflorescence problem on brick masonry if exists impairs the bonding of “Antique Wall Mortar” as is with any other product. * for High Effected efflorescence walls Contact our Customer Care for solution. Packing “Antique Base Wall Mortar” is available in 20Kg Pack. “Antique Finish Wall Mortar” is available in 10Kg Box Pack.

Type : Refractory Bed Material

Material : Alumina

Shape : Preferably Sub Angular / Spherical

Color : Yellow

Brand Name : Bed Material

Features : Effective Usage, Accurate Composition

Al2O3 : 37%

Silica : 57%

Bulk Density : 1050 Kg / m3

Operating from Wankaner (Gujarat, India), we are offering refractory bed material in different grain sizes varying from 0.5-2.36 mm And as per client requirement. Besides, clients can place bulk orders; we assure on time shipments.

We have ultra-modern packaging systems available to keep the products safe from physical factors that may damage the product to some extent. Thus, we only use qualitative packaging material. 

Brand Name : Dazzle

We are offering refractory boiler bed material. Our refractory bed material of low ferric high temperature product, is processed from selected super heat duty refractory aggregates of moderate alumina contents and of highly dense texture. This very special bed material of refractory aggregates fired at a temperature of 1400 centigrade has many special characteristics that make it a perfect material for obtaining smooth and perfect fluidization in fluidized bed combustion boilers with high economy of operations. Special characteristics: • fully screened material with accurately controlled particle size distribution • free from dust fine & over sized particles • highly resistant material against clinker formation • perfect product for obtaining smooth fluidized action • exceptional chemical purity with low alkali and low iron contents • high i.d.t. (initial deformation temperature) • no free iron particles - passed through iron separators • perfectly controlled particle density and bulk density bed material specifications for fbc boiler chemical properties alumina as al2o3 30% - 40% silica as sio2 50-60% max. Alkalies na2o + k2o less than 1% iron as fe2o3 less than 2.5% titanium oxide tio less than 1% physical properties particle density 2.00 gmcc bulk density 1000-1100 kgm³ initial deformation temperature > 1300° c maximum particle size 2.80 mm minimum particle size 0.85 mm note : other sizes also available on request

Our company is one of the leading Manufacturers, Exporters and Suppliers of premium Refractory Boiler Bed Materials in Jharkhand, India. Reckoned for retaining their physical properties under extreme hot conditions, our Refractory Boiler Bed Materials are reliable and durable. They are compositionally balanced. WE offer Refractory Boiler Bed Materials in bulk at market leading prices. Buyers can obtain them from us as per requirements. Specifications Alumina 30% - 35% Iron below 3%, BD 1050 - 1100 kg cu. Mtr. Size 0.50 - 1 mm, 0.85 - 2.38 mm or 1 - 3 mm

Various refractory bricks in different sizes and shapes are now available for diverse applications. The typical refractory materials include fireclay refractories, high alumina refractories, silica brick, Magnesite refractories, Chromite refractories, Zirconia refractories, Insulating materials and Monolithic refractory. Depending on temperatures and service conditions of the applications such as boilers, furnaces, kilns, ovens etc, different types of refractories are used.