Three Phase UPS Dealers

Our company is a trusted manufacturer, supplier and exporter of ksp6 gama series 3:3 phase online ups that is a product of expert designing and latest technology. Ksp6 gama series 3:3 phase online ups is a highly effective power backup device with easy maintenance. application : large-medium computer data center, industrial process and other mission-critical equipment. general features : double conversion on line technologymodularizedouble cpu controlstatic bypassmanual maintenance bypasswide input voltage rangelcd with control paneladvanced battery managementparallel redundant, parallel able up to 6 modulesself diagnosisfull protection against over-discharge, overcharge, over load technical specificationscapacity 10kva  15kva20kva30kva40kva60kva80kva100kva120kva160kva200kva250kvapower8kw12kw16kw24kw32kw48kw64kw80kw96kw128kw160kw200kwinput phase3 phase 4 wire and groundvoltage range400v±20%frequency range45 ~ 65hzpower factor≥0.9outputphase3 phase 4 wire and groundwave formsine-wavecrest factor_3:1rated voltage380400415v(optional)phase voltage setting200v-240v(selectable from front panel)transient response±5% in 10msfrequency5060hz±0.1hzrange of phase lockwith synchronization: ±0.05%. Without synchronization: ± 2% (settable ±1% on the control panel)total harmonic distortion3%(linear load)short circuit currentshort current for 0.1s (200% current)overload capacity110% 125% 150% rated current 30 min 10min 1minbatterybatterymaintenance free lead-acid celldc voltage 384vdc432vdc480vdcbypasstypestatic state + manual maintenance bypassinput phase3 phase 4 wire and groundinput voltage range15% - 25% (the front control panel selectable)input frequency range±1% ~ ±5% the front control panel selectabletransfer timeinverter bypass transfer switch time(overload): 0ms inverter bypass transfer switch time (fault inverter) 1msoverload capacity       (10min)150.00%130.00%125.00%systemremote signalingdry contact (battery low, battery discharging, bypass fault); output 12vdc80ma(optional)remote controlepo & bypass (optional)communication interfacers232 ( snmp , modem optional )running temperature0-40 degree celsiusrelative humidityless than 95% (without condensing)altitude1000m output nominal power (with increase of 100m, it will reduce output of 1%) max 4000mnoise at 1 mless than 60 dbinverter efficiency92.00%93.00%optionalparallel modules can be up to sixnetgross weight (kg)2232802603172653253363933514084975745566337568569011001130014001350145022002400unit dimension                            (w×d×h) mm555×725×1220800×745×14001070×745×14001420×745×18101770×750×1805packing dimension (w×d×h) mm660×855×1425880×945×15851254×875×15851520×880×20001890×880×2010

Ability to Work with all Loads - An obvious choice for IT applications, the heavy duty design of the HF Series also works equally well with other loads such as motor driven loads, medical equipment, communication products which are often damaged by inferior UPSs with step wave or square Wave output. The rugged Nexus HF Series Online UPS systems are designed to perform in the most hostile of Indian Power conditions.   Generator Compatible : As a series designed for Indian conditions, the HF Series UPSs also score over most other systems in the market, affording high compatibility with most types of generators.   Hot Stand-by Mode : In rare instances where the primary UPS system goes out of order the standby UPS instantly takes on the connected load without transferring to bypass. This configuration is available on selected models at an additional cost.   Features : Isolation Transformer for Better Performance Static & Manual Bypass (Optional) True On-line Double Conversion UPS Micro Controller based High-Frequency PWM Technology High Transient Response High Efficiency Constant Voltage Constant Current Charger Wide Input range Pure Sine Wave with Isolated output Generator Compatible Soft Start Facility Crystal Controlled Frequency   Application : Storage devices and Critical Workstations Local Area Networks (LAN) Medical equipment Industrial processes Telecommunication systems ATM machines Printing Equipments Moulding Machines Embroidery Machines Domestic electronic equipments Security systems Critical Machinery Load

Online double conversion topology ​0.8 output power factor Paralleling: upto 8 units for redundancy/capacity Can utilize common battery for N+1 paralleling configurations

Falcon 8000 range of Three Phase Online UPS systems are designed, for the data security and business continuity of today’s networked and cloud environment. Its unique modular design and compact.

In an online UPS, the batteries are always connected to the inverter, so that no power transfer switches are necessary. It is called a double-conversion UPS due to the rectifier directly driving the inverter, even when powered from normal AC current. When power loss occurs, the rectifier simply drops out of the circuit and the batteries keep the power steady and unchanged. When power is restored, the rectifier resumes carrying most of the load and begins charging the batteries, though the charging current may be limited to prevent the high-power rectifier from overheating the batteries and boiling off the electrolyte. The main advantage of an on-line UPS is its ability to provide an "electrical firewall" between the incoming utility power and sensitive electronic equipment.

LIFT UPS is an OFF LINE UPS which has 3 main parts namely – Charger, Inverter and Batteries. As majority of Elevators use three phase power supply, the UPS also is three phase input and three phase output type. It means, the LIFT UPS takes three phase supply and feeds to Elevator simultaneously charging the batteries. In case of a power cut, the inverter turns on battery mode and generates three phase output to feed the load. This transition takes place within a time period of 15-20 seconds depending upon the configuration of the variable frequency drive (VFD V3F) used by the elevator. (Renutron has recently developed a system such that the near zero transfer from utility to battery mode is possible for any type of VF drive) When the mains supply or utility gets restored, the elevator is transferred automatically to mains supply and battery charging starts. Depending upon the size and number of batteries the backup time can be extended from 2-3 Hours up to 8 Hours too.

POWER ONE PMP Series on line UPS systems IGBT inverter with advanced double conversion on line(VFI)technology with an isolation transformer on the inverter output and maintaining pure and precise sine wave output and sophisticated Micro control and reliable, suitable for all type of machinery and inductive load.

We are offering three phase online ups. Enertech ups pvt ltd is offering uninterrupted power supply system and 3 phase online ups in india. It is one of the leading energy solution provider.

We are a well-known Supplier of high performance 3 Phase Online UPS. We are offering to our clients, 10-100 KVA 3 Phase Online UPS, which are used in banks, software development setups, medical equipment, telecommunication and process controls. Manufactured as per the industry standards, 3 Phase Online UPS is provided to our clients in customized specifications as well.

  ePOWER Series ePI 10 ~ ePI 20KVA eP 30 ~ ep 120 KVA 3:3 Phase Application : Servers, Data Centers, Industrial PLCs Telecommunication devices   Features : • Wide input voltage range. • Small footprint. • LCD Display. • High efficiency. • Internal Static and MaintenanceManual Bypass Switch. • Galvanic isolation during normal operation. • Intelligent automatic battery test (every 24 Hrs). • Compatible with all platforms. • Onboard self diagnostic system. • (Remote) Monitoring and Auto-shutdown software. • SNMP adapter ready (option). • Unique parallelparallel redundant capability. • Ability to handle 100% phase imbalance on output while. • Maintaining perfect balance on the input phases.

Bridging Power and TechnologyNUMERIC’s 3 Phase UPS Systems guarantee total power continuity. Unique power-quality features aligned to market requirements plus user-centric characteristics effectively counter problems related to power quality, thereby ensuring fail-safe protection to mission-critical equipment and enabling their superior performance.

We are committed to offering our clients a wide collection of Three Phase UPS. The professionals we have hired do not compromise with quality and use an excellent quality material in the manufacturing process. To ensure their defect-free nature, we inspect these products on certain parameters of quality.

Multi application product. Specifically, PABX, Garments, High rise buildings,  Banks, Medical, Diagnostic Centres, Labs, Universities, Specialty Hospital,  Training Centres, CNC units and all organizations. (Range : Custom made depending on equipment and requirement)

We are equipped with the upgraded machines and technology, thus, we are capable of making stern packaging of products. To keep the product safe from external factors, we make use of finest packaging material. We are open to receiving payment online as well as through traditional payment methods. Our terms and conditions for payment are transparent and we advise patrons to abide by them.   Technical Specifications Model : K 10   Rating : Capacity(kVA/kW) 10kVA : 10/8 15kVA : 15/12 20kVA : 20/16 25kVA : 25/20 30kVA : 20/24 40kVA : 40/32 50kVA : 50/40 60kVA : 60/48 Rectifier Technology : Thyristor BasedTechnology : 1 GBT BasedInput Nominal Voltage : 415 Vac Voltage Range : -15% to 10% from nominal Frequency : 50Hz Frequency Range : +/-3 Hz from nominal Fpower Factor : >0.92 Current Distortion (THDi) : < 5% Output Nominal Voltage : 415 Vac Frequency : 50Hz Voltage Regulation : +/-1% static, +/-5% dynamic 100% load Overload capacity : 125%for 2 minutes, 150% for 20sec Efficiency : >92% Crest Factor : 3:1 at full load Enclosure : IP 20 Static Bypass Switche : Optional Front Panel : Mimic with LED, LED/LCD indicators Environmental Operating temperature : 0°C to 40°C Altitude : <1000m Audible noise at 1 meter : < 60dB