Abba Enterprises Andheri, Mumbai, Maharashtra

Traverse unit for a particular application is selected considering the following details. 1) The Force required to traverse the material, 2) Linear speed required, 3) Total mass to be traversed ( Including weight of RollringTraverse Unit and Associated Assemblies), 4) Shaft speed, 5) Moment of inertia at reversal points and frictional force of load carriers separately mounted guide assemblies if any. Separate load carrier for mounting the guide assembly is recommended for applications having any of the following requirements. a) Heavy guide assembly b) Large overhang required for the guide assembly c) Strong twisting forces large tension is present in the material to be traversed. By using the load carrier forces acting on the traverse unit will be considerably reduced and smaller model of traverse unit can be used to traverse heavy loads.

The machine can draw wire continuously from 1.5 to 0.3 mm as per the customers requirements, we can suggest medium fine wire drawing machines, with line speed of 40 meters second.

The machine is used for drawing copper aluminum wires of different diameters. It consists mainly of wire pay off unit, wire drawing unit complete with gear train, continuous annealer, dancer unit , spooler , wire pointing & stringing machines. The machine can draw wire continuously from 1.5 to 0.3 mm as per the customers requirements, we can suggest medium fine wire drawing machines, with line speed of 40 meters second.

The machine can draw wire continuously from 1.5 to 0.3 mm as per the customers requirements, we can suggest medium fine wire drawing machines, with line speed of 40 meters second.

The Drum Twister machine is designed for Laying up of Power cables round, sectorial, preformed or straight. Telephone cables in groups with out limit to the number. The machine consist of 4 Rotating Pay Offs, trumpets for core guiding, sector sensing unit, rotating die holder, taping units, filler bobbin pay-offs flange diameter 630 DIN 46395 with shoe type brake, rotating caterpillar and a rotating take up. Reel Sizes upto 4000 mm flange , both on pay off and take up can be designed, with a maximum weight of 10-15 tons. Reel loading by hydraulic lift platform mechanical.

The Drum Twister machine is designed for Laying up of Power cables round, sectorial, preformed or straight. Telephone cables in groups with out limit to the number. The machine consist of 4 Rotating Pay Offs, trumpets for core guiding, sector sensing unit, rotating die holder, taping units, filler bobbin pay-offs flange diameter 630 DIN 46395 with shoe type brake, rotating caterpillar and a rotating take up. Reel Sizes upto 4000 mm flange , both on pay off and take up can be designed, with a maximum weight of 10-15 tons. Reel loading by hydraulic lift platform mechanical.

The machine is used to form a multi conductor cable core by twisting 2, 3 or 4 insulated round or sector shaped conductor with filters. The machine is heavy duty , robust to accept insulated conductors upto 400 sq. mm, 1.1 kV to 33 kV range laid –up diameter up to maximum of 100 mm. The machine consists of 1+3 core laying up Cage, Triple die block, 2 nos PVCPolyester Taping Heads, Caterpillar, Take Up stand with fully automatic traversing system, suitable main drive and control panel, are provided.

The copper wire from the outlet is fed into an continuous resistance inline annealer available from 40 KW to 350 KW annealing power and 800 Amp. to 7000 Amps current (max)

Carbon Black Content Tester is used to determine the average carbon black content in materials like plastic pipes, films, sheets, cables, water tanks.

Heating Load : 2 kw

Air Circulating Oven is designed in such a way to give equal distribution of heat at any corner of chamber. Unit is controlling temp. with the help of microprocessor based Digital temperature controller and the air is circulate with the help of blower. Inner body is made up of stainless steel.