SMS (Swedish Metric Standards) Union Gaskets also referred to as SMS Sanitary Unions are the Swedish Standards Hygienic fittings.
It consists of four components: A threaded male weld ferrule and female liner weld ferrule, a round slotted nut, and a square cross-section gasket. The gasket is located in the groove within the male part of the union assembly. SMS Union Gaskets are most commonly found in Europe and are identifiable with their rounder threads on the male part. The male part has a square recess where the seal sits. The weld liner has a flat face where the seal sits. This design provides a smooth cervic-free internal bore.
SMS Union Gaskets are ideal for applications that do not demand constant disassembly of pipes/ hoses.
Ami Polymer Pvt. Ltd. being a major manufacturer and supplier of different kinds of gaskets provides a range of Union Gaskets like SMS Union Gaskets & DIN Union Gaskets, which meet various standards like NSF 51 & FDA and approvals in these industries. At APPL, gaskets at made of high-quality elastomeric materials like Silicone, EPDM, CR, NBR, FKM, and FFKM grade with the help of the latest modern technologies. We also offer metal detectable gaskets to avoid contamination in Food, Beverage, and Pharmaceutical Industries.
SMS (Swedish Metric Standards) Union Gaskets also referred to as SMS Sanitary Unions are the Swedish Standards Hygienic fittings.
It consists of four components: A threaded male weld ferrule and female liner weld ferrule, a round slotted nut, and a square cross-section gasket. The gasket is located in the groove within the male part of the union assembly. SMS Union Gaskets are most commonly found in Europe and are identifiable with their rounder threads on the male part. The male part has a square recess where the seal sits. The weld liner has a flat face where the seal sits. This design provides a smooth cervic-free internal bore.
SMS Union Gaskets are ideal for applications that do not demand constant disassembly of pipes/ hoses.
Ami Polymer Pvt. Ltd. being a major manufacturer and supplier of different kinds of gaskets provides a range of Union Gaskets like SMS Union Gaskets & DIN Union Gaskets, which meet various standards like NSF 51 & FDA and approvals in these industries. At APPL, gaskets at made of high-quality elastomeric materials like Silicone, EPDM, CR, NBR, FKM, and FFKM grade with the help of the latest modern technologies. We also offer metal detectable gaskets to avoid contamination in Food, Beverage, and Pharmaceutical Industries.
A sieve or sifter, is a device for separating wanted elements from unwanted material or for characterizing the particle size distribution of a sample, typically using a woven screen such as a mesh.
Sifting is mainly used in two areas, Check screening of raw material to remove extraneous material and Sizing to sort, segregate or control the particle size distribution of powders and granules. Sifting is mainly achieved by used of vibratory, rotary & centrifugal screeners.
FLUID BED DYRING SIEVES (FBD)
Fluid Bed Dryer have a bed of solid particles which are fluidized by passing a stream of air upward through a specially designed perforated sheet. The upward velocity of air is so maintained so as to slightly lift the solid particles and set them in motion. This motion can be utilized to bring about mixing as well as forward movement of the solids particles. The air is heated and the process hot air evaporates the fluid and dries the solids
A sieve or sifter, is a device for separating wanted elements from unwanted material or for characterizing the particle size distribution of a sample, typically using a woven screen such as a mesh.
Sifting is mainly used in two areas, Check screening of raw material to remove extraneous material and Sizing to sort, segregate or control the particle size distribution of powders and granules. Sifting is mainly achieved by used of vibratory, rotary & centrifugal screeners.
FLUID BED DYRING SIEVES (FBD)
Fluid Bed Dryer have a bed of solid particles which are fluidized by passing a stream of air upward through a specially designed perforated sheet. The upward velocity of air is so maintained so as to slightly lift the solid particles and set them in motion. This motion can be utilized to bring about mixing as well as forward movement of the solids particles. The air is heated and the process hot air evaporates the fluid and dries the solids
is made from advance grade silicone rubber conforms to FDA 21 CFR 177.2600 for food grade criteria suitable for various sealing applications. These inflatable seals starts inflation range from 5mm to 20mm when 2-3 BAR pressure is applied after installation in door. Available with static Dissipative Formulation (107 to 109 cm).
is made from advance grade silicone rubber conforms to FDA 21 CFR 177.2600 for food grade criteria suitable for various sealing applications. These inflatable seals starts inflation range from 5mm to 20mm when 2-3 BAR pressure is applied after installation in door. Available with static Dissipative Formulation (107 to 109 cm).
Sampling needle is design for use in biopharma applications, particularly in sampling system bag, offering excellent flexibility, and compatibility with various solutions.
Sampling needle is design for use in biopharma applications, particularly in sampling system bag, offering excellent flexibility, and compatibility with various solutions.
The pharmaceutical and bio-pharmaceutical production industries are at the forefront of transforming fluid systems functioning with Quick Connectors. It provides an assurance of reliable connections, a critical factor in the fluid systems integral to manufacturing pharmaceutical and bio-pharmaceutical products.
The pharmaceutical and bio-pharmaceutical production industries are at the forefront of transforming fluid systems functioning with Quick Connectors. It provides an assurance of reliable connections, a critical factor in the fluid systems integral to manufacturing pharmaceutical and bio-pharmaceutical products.
These autoclavable PP clamp tubing flow valves can be easily operated with one hand, Available in mini, maxi or medium sizes.
PP Clamp will not rust, corrode or deform, it accommodates a wide range of tubing
These autoclavable PP clamp tubing flow valves can be easily operated with one hand, Available in mini, maxi or medium sizes.
PP Clamp will not rust, corrode or deform, it accommodates a wide range of tubing
Imapure®-EPL is a platinum-cured silicone tubing engineered specifically for continuous peristaltic pump operations. Designed with enhanced durability and flexibility, it offers an extended pump life, making it ideal for demanding applications in biopharma and drug delivery processes. Imapure®-EPL tubing ensures consistent performance with minimal wear, even under prolonged usage.
Imapure®-EPL is a platinum-cured silicone tubing engineered specifically for continuous peristaltic pump operations. Designed with enhanced durability and flexibility, it offers an extended pump life, making it ideal for demanding applications in biopharma and drug delivery processes. Imapure®-EPL tubing ensures consistent performance with minimal wear, even under prolonged usage.
Imapure® is Platinum Cured Silicone Tubing designed for peristaltic pump and fluid transfer in Pharmaceutical and Biotech applications. Imapure® is translucent silicone tubing known for its ultra smooth bore to prevent any particle entrapment. It is especially designed to comply with requirements of critical Food and Pharmaceutical standards of regulatory markets.
Imapure® is Platinum Cured Silicone Tubing designed for peristaltic pump and fluid transfer in Pharmaceutical and Biotech applications. Imapure® is translucent silicone tubing known for its ultra smooth bore to prevent any particle entrapment. It is especially designed to comply with requirements of critical Food and Pharmaceutical standards of regulatory markets.
FittingFits And Seals The Gap Between Two Ferrules
ImprovementImproves Inline Process With Online Validation
FeaturesThermocouple Wire,Stop Lock,Hole Plug
APPL Offers wide range of spore trap and sensor validation special designed gaskets for validating sterility in pharmaceuticals and biotech process applications.
These special designed gaskets can be easily fits and seals the gap between two ferrules to ensure leak-free process of the ferrules. The materials of constructions are available in Platinum cured silicone and EPDM rubber. These special gaskets improve inline process with online validation through Thermocouple wire, stop lock, hole plug and sampling tube from 4 side provisioned special gaskets
APPL Offers wide range of spore trap and sensor validation special designed gaskets for validating sterility in pharmaceuticals and biotech process applications.
These special designed gaskets can be easily fits and seals the gap between two ferrules to ensure leak-free process of the ferrules. The materials of constructions are available in Platinum cured silicone and EPDM rubber. These special gaskets improve inline process with online validation through Thermocouple wire, stop lock, hole plug and sampling tube from 4 side provisioned special gaskets
Imaclamp® - A Hygienic Sealing Sanitary Gasket are used to get sealing during fluid transfer at the piping systems in Biotech, Pharma, Food, Beverages and cosmetics process systems. It has been designed to seal the two surfaces of Tri clamp ferrules to prevent leakage during media transfers process.
It is also ideally used in CIP (Clean-in-place) & SIP (Steam-in-place) Process in biotech and pharmaceutical industries. Imaclamp® seals offers in wide range of Polymers such as Silicone, EPDM, FKM, PTFE and Nitrile with Lip (Flange) and without Lip (Flange) at the outer diameter surface. It is available in wide range of different types to fulfil the different process challenges which are Gaskets with Stainless Steel Mesh/Screen, Validation with Validation with Sensor Spore Trap Gaskets and Enveloped PTFE gaskets
Imaclamp® - A Hygienic Sealing Sanitary Gasket are used to get sealing during fluid transfer at the piping systems in Biotech, Pharma, Food, Beverages and cosmetics process systems. It has been designed to seal the two surfaces of Tri clamp ferrules to prevent leakage during media transfers process.
It is also ideally used in CIP (Clean-in-place) & SIP (Steam-in-place) Process in biotech and pharmaceutical industries. Imaclamp® seals offers in wide range of Polymers such as Silicone, EPDM, FKM, PTFE and Nitrile with Lip (Flange) and without Lip (Flange) at the outer diameter surface. It is available in wide range of different types to fulfil the different process challenges which are Gaskets with Stainless Steel Mesh/Screen, Validation with Validation with Sensor Spore Trap Gaskets and Enveloped PTFE gaskets
Din Union stands for Deutsches Institut Fur Normung (German Institute of Standardization).
DIN Union Gaskets are designed specifically for DIN fittings. DIN Union Gaskets are mostly found on pumps machinery and other processing equipment compliant with the DIN 11851 standard. All other Unions have a weld liner. However, the DIN union has a conical weld liner, which sits slightly inside the male part on the top of the seal, ensuring the union aligns correctly when being tightened.
Ami Polymer Pvt. Ltd. being a major manufacturer and supplier of different kinds of gaskets provides a range of Union Gaskets like SMS Union Gaskets & DIN Union Gaskets, which meet various standards like NSF 51 & FDA and approvals in these industries. At APPL, gaskets at made of high-quality elastomeric materials like Silicone, EPDM, CR, NBR, FKM, and FFKM grade with the help of the latest modern technologies. We also offer metal detectable gaskets to avoid contamination in Food, Beverage, and Pharmaceutical Industries.
Din Union stands for Deutsches Institut Fur Normung (German Institute of Standardization).
DIN Union Gaskets are designed specifically for DIN fittings. DIN Union Gaskets are mostly found on pumps machinery and other processing equipment compliant with the DIN 11851 standard. All other Unions have a weld liner. However, the DIN union has a conical weld liner, which sits slightly inside the male part on the top of the seal, ensuring the union aligns correctly when being tightened.
Ami Polymer Pvt. Ltd. being a major manufacturer and supplier of different kinds of gaskets provides a range of Union Gaskets like SMS Union Gaskets & DIN Union Gaskets, which meet various standards like NSF 51 & FDA and approvals in these industries. At APPL, gaskets at made of high-quality elastomeric materials like Silicone, EPDM, CR, NBR, FKM, and FFKM grade with the help of the latest modern technologies. We also offer metal detectable gaskets to avoid contamination in Food, Beverage, and Pharmaceutical Industries.
Clean Room Molded PP Y- connector is designed to address the needs of the single-use fluid path component developed for the biotechnology and pharmaceutical industry. Clean Room Molded Y- connector is manufactured in cleanrooms within a facility operating an ISO 9001 quality management system.
Clean Room Molded PP Y- connector is designed to address the needs of the single-use fluid path component developed for the biotechnology and pharmaceutical industry. Clean Room Molded Y- connector is manufactured in cleanrooms within a facility operating an ISO 9001 quality management system.
Clean Room Molded PP T- connector is designed to address the needs of the single-use fluid path component developed for the biotechnology and pharmaceutical industry. Clean Room Molded T- connector is manufactured in cleanrooms within a facility operating an ISO 9001 quality management system.
Clean Room Molded PP T- connector is designed to address the needs of the single-use fluid path component developed for the biotechnology and pharmaceutical industry. Clean Room Molded T- connector is manufactured in cleanrooms within a facility operating an ISO 9001 quality management system.
Clean Room Molded PP Straight connector is designed to address the needs of the single-use fluid path component developed for the biotechnology and pharmaceutical industry. Clean Room Molded Straight connector is manufactured in cleanrooms within a facility operating an ISO 9001 quality management system.
Clean Room Molded PP Straight connector is designed to address the needs of the single-use fluid path component developed for the biotechnology and pharmaceutical industry. Clean Room Molded Straight connector is manufactured in cleanrooms within a facility operating an ISO 9001 quality management system.
Clean Room Molded PP Reducer is designed to address the needs of the single-use fluid path component developed for the biotechnology and pharmaceutical industry. Clean Room Molded Reducer is manufactured in cleanrooms within a facility operating an ISO 9001 quality management system.
Clean Room Molded PP Reducer is designed to address the needs of the single-use fluid path component developed for the biotechnology and pharmaceutical industry. Clean Room Molded Reducer is manufactured in cleanrooms within a facility operating an ISO 9001 quality management system.
Clean Room Molded PP End Plug is designed to address the needs of the single-use fluid path component developed for the biotechnology and pharmaceutical industry. Clean Room Molded PP End Plug is manufactured in cleanrooms within a facility operating an ISO 9001 quality management system
Clean Room Molded PP End Plug is designed to address the needs of the single-use fluid path component developed for the biotechnology and pharmaceutical industry. Clean Room Molded PP End Plug is manufactured in cleanrooms within a facility operating an ISO 9001 quality management system
Clean Room Molded PP End Cap is designed to address the needs of the single-use fluid path component developed for the biotechnology and pharmaceutical industry. Clean Room Molded PP End cap is manufactured in cleanrooms within a facility operating an ISO 9001 quality management system.
Clean Room Molded PP End Cap is designed to address the needs of the single-use fluid path component developed for the biotechnology and pharmaceutical industry. Clean Room Molded PP End cap is manufactured in cleanrooms within a facility operating an ISO 9001 quality management system.
Clean Room Molded PP Cross- connector is designed to address the needs of the single-use fluid path component developed for the biotechnology and pharmaceutical industry. Clean Room Molded Cross- connector is manufactured in cleanrooms within a facility operating an ISO 9001 quality management system.
Clean Room Molded PP Cross- connector is designed to address the needs of the single-use fluid path component developed for the biotechnology and pharmaceutical industry. Clean Room Molded Cross- connector is manufactured in cleanrooms within a facility operating an ISO 9001 quality management system.
UsageSealing Solutions For Bio-process Applications
Sealing solutions for Bio-process Applications Our aseptic bush is engineered to meet the standards of single-use bioprocessing applications. Crafted from biocompatible materials, this product ensures reliability and simplicity for the pharma and biopharma sectors. Its crimping design guarantees a secure, leak-proof seal, eliminating the need for complex tools and reducing contamination risks during installation. With seamless compatibility across a wide spectrum of single-use bioprocessing components and a range of sizes available, our product excels in adaptability and ease of integration. Certified for quality and manufactured with sustainability in mind, it aligns perfectly with industry standards.
Sealing solutions for Bio-process Applications Our aseptic bush is engineered to meet the standards of single-use bioprocessing applications. Crafted from biocompatible materials, this product ensures reliability and simplicity for the pharma and biopharma sectors. Its crimping design guarantees a secure, leak-proof seal, eliminating the need for complex tools and reducing contamination risks during installation. With seamless compatibility across a wide spectrum of single-use bioprocessing components and a range of sizes available, our product excels in adaptability and ease of integration. Certified for quality and manufactured with sustainability in mind, it aligns perfectly with industry standards.
Type : Aseptic Bush
Material : Biocompatible Materials
Usage : Sealing Solutions For Bio-process Applications
Secondary Business TypeManufacturer / Exporters / Wholesale Suppliers
Year of Establishment1996
No. of Employees101 - 250
Annual TurnoverRs. 25 to 50 Crore Approx.
Ownership TypeOthers
Opening Hours
SUN : Closed
MON : 9:30 AM - 6:30 PM
TUE : 9:30 AM - 6:30 PM
WED : 9:30 AM - 6:30 PM
THU : 9:30 AM - 6:30 PM
FRI : 9:30 AM - 6:30 PM
SAT : 9:30 AM - 6:30 PM
Since 1998, APPL is in the business of Silicone Elastomeric products and also, other Polymeric components which ultimately provide solutions to Fluid Transfers, Sealing, and Contamination controls for Biopharma, Pharma, Medical, Laboratory, Food, Beverages, and Engineering sectors worldwide.
Reviews & Ratings
Write a Review
Post Free Ad
