Angular Contact Ball Bearings Dealers in Ghatkopar, Mumbai (3 products available)

Angular Contact Ball Bearings have raceways in the inner and outer ring, which are displaced with respect to each other in the direction of the bearing axis. This means that they are suitable for acting radial and axial loads. The axial load carrying capacity of Angular Contact Ball Bearings increases with increasing contact angle. Single Row Angular Contact Ball Bearings can support radial and thrust loads. They accommodate thrust loads in only one direction; they are adjusted against another bearing, which support the opposite axial load. Single Row Angular Contact Ball Bearings of series 70 BEP, 72 BEP and 73 BEP have a contact angle of 40°. They can therefore accommodate high axial loads, are non-separable and are suitable for particularly high speed. The Single Row Angular Contact Ball Bearings are produced in two standard versions for different purposes. The standard design is intended for arrangements where only one bearing is used at each bearing position. Universal preload ground bearings are intended for being mounted in pairs either in X- O- or Tandem-arrangement or for other group mounting. They could be mounted in any possible arrangement.

Angular contact ball bearings are able to support radial load and axial load. As single row angular contact ball bearings can only support axial load in single direction, matched bearing mounting is often adapted to them. As matched pairs of bearing pre-load for them is more convenient. Retainers are made of brass, synthetic resins or others subject to individual bearing features and applications.

Matched Pair bearings are Angular contact ball bearings that are suitable for applications that require high accuracy and high-speed performance. Bearings with a smaller contact angle are more suitable for high-speed rotation; those with a larger contact angle are more suitable for high load applications. Angular contact ball bearings are often preloaded to enhance their rigidity and rotating performance. For high-precision matched pair angular contact ball bearings of class 5 or higher, which are used in machine tools and other precision equipment, the standard preload is specified in three levels: light, medium, and heavy. Two bearings are used together facing one another or two or more bearings are matched and used. andem arrangementA tandem arrangement is used when the load carrying capacity of a single bearing is inadequate. When arranged in tandem, the load lines are parallel and the radial and axial loads are equally shared by the bearings. Axial loads in both directions can be accommodated. Back-to-back arrangementMounting two bearings back-to-back provides a relatively stiff bearing arrangement, which can also accommodate tilting moments. When arranged back-to-back, the load lines diverge towards the bearing axis. Axial loads in both directions can be accommodated, but only by one bearing in each direction. Face-to-face arrangement Mounting two bearings face-to-face is not as stiff as a back-to-back arrangement, but less sensitive to misalignment. When arranged face-to-face, the load lines converge towards the bearing axis. Axial loads in both directions can be accommodated, but only by one bearing in each direction. "V-shaped" markingA "V-shaped" marking on the outside surface of the outer rings of matched bearings (fig. 5) indicates how the set should be mounted to obtain it's desired performance . The bearing pairs are supplied as a packaged unit.