Aqua Solutions Vasai East, Mumbai, Maharashtra

Body Material : Durable, Corrosion-resistant Plastic

Water Softener PlantA water softener plant is a system designed to remove hardness-causing minerals—primarily calcium and magnesium—from water through a process known as ion exchange. This results in softened water, which helps prevent scale buildup, protects pipelines and appliances, and enhances the effectiveness of soaps and detergents. These systems are widely used in residential, commercial, and industrial settings.How It WorksResin Beads The central component is a tank filled with resin beads, typically made from polystyrene, coated with sodium or potassium ions.Ion Exchange Process As hard water passes through the resin bed:Calcium and magnesium ions in the water are attracted to the resin.These hardness ions are exchanged for sodium or potassium ions.The softened water continues on for use, now free of most hardness minerals.Softened Water Output The water leaving the resin tank has significantly reduced hardness, minimizing scale formation and improving water compatibility with equipment and cleaning agents.Regeneration Over time, resin beads become saturated with calcium and magnesium ions. To restore effectiveness:A brine solution (typically made from sodium chloride) is flushed through the resin.This process recharges the beads with sodium or potassium ions, and flushes out the hardness minerals to the drain.The cycle then repeats for continuous operation.Types of Water Softener PlantsAutomatic SystemsOperate fully automatically using time-based or flow-based controls.Initiate regeneration cycles based on usage or preset intervals.Require minimal human intervention.Semi-Automatic SystemsPartially automated; operators manually initiate regeneration.Suitable for facilities with predictable water usage patterns.Manual SystemsRequire full manual control to perform regeneration cycles.Typically used in small-scale or low-budget operations.

Application : Boiler Feed,RO Pre-treatment,Cooling Towers,Laundry,Hotels,Pharma

Country of Origin : Made In India

Material : PVC

Automatic Grade : Manual

Application : Household

Capacity : 100 LPH

Water Filtration PlantA water filtration plant is a facility designed to purify raw water from natural sources such as rivers, lakes, or reservoirs. Through a series of physical, chemical, and sometimes biological processes, it removes impurities and contaminants, ensuring the water meets safety and quality standards for drinking, domestic, industrial, and municipal use.Purpose of a Water Filtration PlantTo remove contaminants like suspended solids, organic matter, bacteria, and viruses from raw water.To ensure compliance with regulatory and health standards (such as BIS, WHO, or EPA).To provide a consistent, reliable supply of clean and safe water for communities, industries, and municipalities.Key Treatment Processes1. Pre-treatmentInvolves chemical dosing for pH correction, coagulation, and flocculation.Helps agglomerate fine particles for easier removal.May include pre-filtration to eliminate larger debris or turbidity.2. FiltrationUtilizes multimedia filters (sand, gravel, anthracite) or membrane filters (microfiltration, ultrafiltration).Removes fine suspended solids, color, and some microorganisms.3. DisinfectionDestroys or inactivates pathogens (bacteria, viruses, protozoa).Common methods include chlorination, ozonation, and UV irradiation.4. Advanced Treatment (Optional)Used in specialized or high-purity applications (e.g., for industries or hospitals).May include reverse osmosis, ion exchange, or activated carbon filtration to remove dissolved solids, trace organics, or heavy metals.Main Components of a Water Filtration PlantIntake StructuresDraw water from natural sources like rivers, lakes, or reservoirs.PumpsTransport water through each stage of the treatment process.Chemical Feed SystemsInject coagulants, disinfectants, pH adjusters, and other necessary chemicals.Settling Basins / ClarifiersProvide time for heavy particles to settle before filtration.Filtration UnitsInclude sand filters, pressure filters, or membrane units depending on the plant design.Disinfection UnitsChlorine contact tanks, UV lamps, or ozone generators for final microbial control.Automation and Control SystemsUtilize PLC and SCADA for real-time monitoring and efficient plant operation.Storage TanksStore treated water before it enters the distribution system.Water Testing LaboratoryPerforms regular sampling and analysis to ensure quality throughout the process. 

Application : Drinking Water, Industrial Processing, Agriculture, Hotels, Housing Societies, Schools

Material : FRP / MSRL / SS 304 Or 316

Application : Ultrafiltration Water Treatment Plants

Ultrafiltration is a membrane-based, pressure-driven filtration process that separates contaminants by size. It uses a semi-permeable membrane to remove suspended solids, bacteria, and high-molecular-weight substances while allowing water and smaller molecules to pass through. Core Features Membrane Filtration: Utilizes a semi-permeable membrane with defined pore size for selective separation. Pressure Operation: Functions under low to moderate pressure for efficient filtration. Molecular Sieving: Filters based on particle size—larger substances are blocked, smaller ones pass. Applications RO system pre-treatment Industrial and municipal water treatment Wastewater recovery Food and dairy processing Pharmaceutical production Advantages High removal efficiency for bacteria and suspended matter Energy-efficient and compact Reduces membrane fouling in downstream systems Minimal chemical usage

Application : Drinking Water, Wastewater Recycling, RO Pre-treatment, Food & Beverage, Pharmaceuticals

Automatic Grade : Automatic

Material : Stainless Steel (SS)

Application : Industrial

Country of Origin : Made In India

Material : Hollow Fiber Or Spiral Wound Polymer

Application : Pre-treatment For RO, Drinking Water

Usage/Application : Effluent And Sewage Treatment Plants

Number Of Flower : Diaphragm, Aseptic, Diverter, Ball, Butterfly

Material : High-grade Stainless Steel (SS316L)

Application : Food, Beverage, Pharma, Biotech

Number Of Flower : Membrane Housing

Material : Stainless Steel

Application : Water Filtration Systems

Availability : Varies Based On Size

Material : High-grade Stainless Steel (SS304/SS316)

Application : Liquid Storage, Mixing, Processing

Feature : Top Manway, Inlet/outlet Ports

Capacity : Available In Various Volumes

Number Of Flower : Flow Diverter Valves

Material : High-grade Stainless Steel

Application : Water Treatment

Power : 1000 W

Size : 21 X 24 Inch

Phase : Single Phase

Country of Origin : 220V

Country of Origin : Made In India

Sewage Treatment Plant (STP) – OverviewA Sewage Treatment Plant (STP) is an engineered facility designed to treat wastewater by removing contaminants before safe discharge or reuse. It employs a combination of physical, chemical, and biological processes to handle sewage from residential, commercial, and industrial sources. The result is treated water (effluent), which can either be safely released into natural water bodies or reused for non-potable purposes.Key Components and Treatment Stages 1. Preliminary TreatmentThis initial phase removes large solids like rags, plastics, and grit using screening systems and grit chambers.2. Primary TreatmentSedimentation tanks allow heavier particles to settle, forming primary sludge, which is separated from the clarified water.3. Secondary TreatmentBiological processes involving microorganisms degrade dissolved and suspended organic matter, reducing the Biological Oxygen Demand (BOD) and pollutants.4. Tertiary Treatment (Optional)Advanced purification steps like filtration, UV disinfection, or chemical dosing may be applied depending on the end-use of the treated water.5. Sludge Treatment and DisposalSludge collected from various treatment stages undergoes further processing—typically digestion, thickening, or dewatering—and is then properly disposed of or reused.Purpose and ImportanceEnvironmental Protection Helps prevent contamination of water bodies by effectively removing pollutants.Public Health Safeguard Reduces disease transmission by treating sewage that may carry harmful pathogens.Water Conservation Treated water can be reused for flushing, irrigation, cooling towers, or landscaping, thus supporting sustainable resource management.Regulatory Compliance Ensures that effluent discharge meets prescribed environmental norms and legal standards.

Country of Origin : India

Material : RCC, MS, FRP-based Construction

Application : Residential Complexes, Hotels, Hospitals, Institutions, Municipalities

Number Of Flower : DM (Deionized / De-mineralized) Water Plant

Automatic Grade : Semi Automatic

Material : FRP / MSRL / SS 304 (as Per Requirement)

Application : Pharma, Electronics, Laboratories, Boilers, Battery Water

Country of Origin : Made In India

Number Of Flower : Diaphragm Valve

Material : Stainless Steel (SS316L)

Usage : Industrial

Vessel Diameter : 200 Mm

Vessel Height : 500 Mm

Country of Origin : Made In India

Usage : Industrial

Vessel Diameter : 200 Mm

Vessel Height : 500 Mm

Automation Grade : Automatic

Country of Origin : Made In India

Number Of Flower : Water Treatment Control Panel

Application : RO, UF, Filtration Plants

Reverse Osmosis (RO) System OverviewA Reverse Osmosis (RO) system is a water purification technology that removes dissolved salts, particles, and other contaminants by forcing water through a semi-permeable membrane. It is widely used in residential, commercial, and industrial applications to produce clean, high-purity water.1. How It WorksSemi-permeable Membrane At the heart of the RO system is a membrane with microscopic pores that allow water molecules to pass through while blocking contaminants like salts, minerals, and microorganisms.Pressure Application Pressure is applied to the feed water, pushing it through the membrane. This pressure must exceed the natural osmotic pressure to separate clean water from dissolved impurities.Separation Process The system splits the water into two streams:Permeate (Purified Water): The clean water that passes through the membraneReject/Brine: The concentrated water carrying the removed contaminants2. Key ComponentsPre-filter Removes large particles, sediment, and chlorine to prevent damage to the RO membrane.RO Membrane The central filtering element, usually made of thin-film composite (TFC) material, which removes up to 99% of dissolved impurities.Post-filter (Optional) Used to enhance the taste and odor of the purified water, especially in drinking water systems.Storage Tank Holds the purified water for immediate or future use.Pressure Pump Boosts water pressure to improve filtration efficiency and overcome osmotic resistance.3. Applications of RO SystemsDrinking Water Purification Commonly used in homes and offices to produce clean, safe drinking water—especially effective in areas with high total dissolved solids (TDS).Desalination Essential in converting seawater into potable water for regions with limited freshwater resources.Industrial Processes Applied in industries for boiler feedwater, pharmaceutical production, food processing, and water reuse systems.Aquariums and Hydroponics Provides mineral-free, controlled water environments for sensitive aquatic life and plant cultivation.

Application : Pharma, Food & Beverage, Electronics, Water Purification Plants

Material : SS 316/304 Or FRP, Sanitary Design

Number Of Flower : Reverse Osmosis Membrane

Material : Thin-film Composite Polyamide

Application : Potable & Industrial Water

Material : SS 316L

Purified Water Distribution SystemA Purified Water (PW) Distribution System is a sophisticated network designed to deliver high-purity water to critical points of use in pharmaceutical, biotechnology, cosmetic, and food & beverage industries. It maintains consistent quality, controls temperature and flow, and minimizes contamination risks.Key Components and FeaturesStorage TankConstructed from SS316L stainless steel with electropolished surfacesCapable of handling pressure and temperature fluctuationsEnsures clean, contamination-free water storageRecirculation SystemUses sanitary-grade pumps to maintain continuous circulationPrevents stagnation and microbial growth through turbulent flowDistribution PipingMade from sanitary stainless steel tubing (ASTM A270 or ASME BPE)Features orbital welding and tri-clamp connections for cleanabilityFully drainable designPumpsTypically centrifugal pumps with Variable Frequency Drives (VFDs)Maintain precise flow rates and system pressureInstrumentationIncludes sensors for flow, pressure, temperature, conductivity, and Total Organic Carbon (TOC)Ensures water quality remains within defined parametersSanitization MethodsMay include ozonation, heat, or chemical methodsHelps eliminate microbial contamination and maintain system hygieneDead Leg MinimizationSystem is designed to reduce or eliminate areas of water stagnationHelps prevent biofilm formation and microbial buildupTemperature ControlPW systems generally operate between 15–25°CWFI (Water for Injection) loops typically run above 80°C for microbial controlFinal FiltrationUtilizes 0.2 or 0.1 micron cartridge filtersActs as a final safeguard to remove particulates and microorganismsSpecial Considerations for Pharmaceutical ApplicationsRegulatory ComplianceSystems are designed to meet standards such as USP, EP, and JPWFI SystemsSpecialized setups, often involving distillation, are required for Water for Injection used in parenteral (injectable) productsAutomation and ControlOften includes PLC- or SCADA-based automationSupports continuous monitoring, alarms, and data logging for validated processes

Body Material : SS 316L,Electropolished,Orbital Welded