Control Devices Jogeshwari, Mumbai, Maharashtra

Primary standard U Tube Manometer is used for precise measurement of pressure, vacuum, differential pressure, and flow measurement in plants and labs where optimum accuracy is required. The U Tube Manometer is measure the pressure difference in orifices located in the airflow in air handling or ventilation system.   Attributes : Available in wall mounted & stand mounted. Ranges in mm :  50-0-50 to 250-0-250 mm Efficient Accurate

The Tubular Glass Level Indicator is commonly used for visual liquid level observation. The Tubular Glass Level Indicator is a simple and reliable device used for direct reading in atmospheric or pressurized tank applications. The Tubular Glass Level Indicator is mounted parallel, at the side of the tank. As the process level fluctuates, the level in the transparent glass tube changes accordingly and gives local liquid indication. Technical Specification :  New Bolted Gland with teflon packing ensures positive leak tightness for full vacuum as well as 10kg/cm2 pressure service. Sturdy Protection : Glass tube is protected by box section made out of two M.S. channels Beam strength of the guard is so good that even if man stands on the indicator supported at two ends, the tube remains intact. Light Weight : 75% less in weight compared to Reflex and Transparent liquid level indicators Extraordinary strength but less bulky   Excellent Visibility : 16/19/25mm O.D Borosilicate glass gives excellent visibility Surface tension effects are eliminated   Test Pressure : Full vacuum and/or 10 kg/cm² compressed Air   Attributes : Liquid indicator Durable Excellent quality Reliable

The Top Mounted Magnetic Level Indicator is used as a direct local level indicator mounted on the top of the vessel or RCC tank. The Top Mounted Magnetic Level Indicator basically consists of a guide pipe, float with stem main magnet, a guard protecting magnet guide tube, follower magnet and glass tube, the guide pipe inserted in the tank, guides the float which follows the liquid level in the tank. The float is made out of SS304/ SS316/ PP/ PVDF/ PTFE/ PVC etc. As the level inside the tank rise the float, which buoys up, moves the connecting pipe to the region of visibility on top. The entire construction of Top Mounted Magnetic Level is very sturdy keeping in mind its outdoor installation. Applications : Dipstick substitute Underground tanks Horizontal tanks Corrosive acids Liquefied Gases

The Single Limb Manometer is a direct reading manometer for the precise measurement of pressure, vacuum different pressure flow and liquid level measurement. The Single Limb Manometer is available in different sizes as per the requirement of the client. The Single Limb Manometer is a simple device that facilitates direct and accurate reading. Attributes : In wall mounted and stand mounted Range from 0-100 to 0-500 Acrylic Body ( CVG / SLM ) Metallic Body ( CVG / SLMM

The Sight Flow Indicators is commonly used for visual liquid level observation. The Sight Flow Indicator is a simple and reliable device used for direct reading in atmospheric or pressurized tank applications. Available in :Full view, double window, single window with flapper, rotary wheel and in drip tube design, suitable for different type of fluids.Type of Connection : Screwed or Flanged.Available Sizes : 12 NB to 250 NB

The Side Mounted Magnetic Level Switch system has a side mounted flange. The float is constructed from the material suiting the fluid in the tank. When the fluid level raises above the desired point the float prop up and actuates the magnetic switch which is kept inside the stem. The closure of the switch indicates the level rise or decrease. Side Mounted Magnetic Level Switch can operate in most fluids and it requires minimum maintenance. Applications : High Low level signals for alarm annunciation Safety interlock circuits Automatic Pump Control Solenoid Value Control Prevention of tank overflows Pump safeguard against dry running

The Side Mounted Magnetic Level Indicator provides a reliable and safe indication for hazardous liquids kept under high pressure. The Side Mounted Magnetic Level Indicator is commonly used as a direct local level indicator mounted on the top of the vessel or RCC tank. The float is manufactured using SS304/ SS316/ PP/ PVDF/ PTFE/ PVC etc. As the level inside the vessel raises the float it moves the connecting pipe to the reach of visibility on top.Applications : Corrosive acids : oleum, H2SO4 HNO3,Acetic Solvents : bezene, toluene, alcohols, CS2. Liq. Gases : LPG, NH3, Chlorine. Propylene, Butadiene. Veg.Oils, Fuel Oils, Lubricants, Water Poisonous / toxic liquids, DMA, TEA, PCL3.SO3 Rotoball Option Accessories : High & Low level Alarm. Resistance Strip with 4-20 m Amp. output

Metal Tube Rotameter is perfect for high pressure, temperature and corrosive conditions with hazardous fluids. The Metal Tube Rotameter requires no additional power supply and the basic measurement system is robust and accurate. The Metal Tube Rotameter is used for monitoring flow of De-mineralized Water, Gases, Acid, Salts, Organic Solvents and most petroleum product. Attributes : Low cost indicators High visibility scale No power required Idle for high temperature   Available Sizes : In 316 SS construction with flanged connections in line size from 20 NB to 100 NB   Ranges : 100 to 60.000 LPH of water at ambient temperature. 2.5-1700 Nm³/hr of air at NTP. Accuracy : ± 2% of FSD & ± 1.5% of FSD on request.

The Dependable Low Flow Rotameter has been designed keeping in mind the liquids which have a low flowing rate. The Low Flow Rotameter is used as an analytical device, for environment protection and other scientific equipment. The Low Flow Rotameter we offer has finished quality tested by the highly skilled quality inspectors for the satisfaction of our valued clients. Ranges : 0.6 to 160 LPH of water at ambient temperature 10 to 5000 NLPH of air at NTP Accuracy :+ 2 FSD   Accessories : Built in needle valve DP regulator Panel Mounting Clamps High & Low Flow Alarms   Attributes : Resistant to high temperature Dependable Accurate indication Analytical device

The Inclined Tube Manometer is portable and it has CVG solid acrylic fabricated from 1 inch thick acrylic plastic solid block. The Inclined Tube Manometer is vertically unbreakable, stable and free from any distortion. We provide Inclined Tube Manometer with PVC plastic engraved scale, zero adjusting knob, level bottom and panel mounting holes. The Inclined Tube Manometer is available in different range from 10 mm wg to 200 mm wg. Attributes : Durable Portable CVG solid acrylic Unbreakable

The Bypass Rotameter is suitable for metering floe rates in 50 NB & above pipeline. The Bypass Rotameter is available in a variety of materials, carrier rings, impulse piping. The Bypass Rotameter is available in different sizes ranging from 50 NB to 450 NB according to the requirement of the client. Attributes : Ranges 20 to 300 M³/hr of water 0.1 to 800 Nm³/hr of air at NTP Accuracy of ± 2% of FSD Comes with Isolating Valves Durable

The Acrylic Body Rotameter is suitable for inline installation with flanged or screwed connection with several options of materials for wetted parts. The Acrylic Body Rotameter is available in different sizes ranging from 15 NB to 100 NB. We offer Acrylic Body Rotameter with durable high and low flow alarms from indication.   Ranges : 2.5 to 40,000 LPH of water at ambient temperature 1.0 to 300 Nm³/hr of air   Attributes : Accuracy of +2% of FSD Durable Comes with alarm Affordable

Float Operated Liquid Level Switch reliably detects the fluid level in the tank. Float Operated Liquid Level Switch can be installed in tanks with small dimensions or limited space. The Float Operated Liquid Level Switch can be mounted on the side of the vessel or tank. The Float Operated Liquid Level Switch is constructed with high grade material for tough industrial use.Attributes : Reliable Accurate measurement Compact Affordable

The Glass Tube Rotameter is designed for the accurate measurement of rate of flow for liquids and gases. The Glass Tube Rotameter is mounted on vertically on the tank or vessel. A complete Glass Tube Rotameter installation consists of tapered glass tube and shielded from all the sided with a clear front visibility. The float provides indication of flow rate of the fluid or gas inside the tubes of Glass Tube Rotameter.   Available Sizes : 15 NB to 100 NB Ranges : 2.5 to 40,000 LPH of water at ambient temperature. 0.1 to 750 Nm³/hr of air at NTP.   Accuracy : +2% of FSD Accessories : High & Low Flow Alarms

Technical Specification : Suitable for online installation with flanged or screw connection with severaloptions of materials for wetted parts.