Cultivators Dealers in Mumbai

Mini-tillers aren't just for passionate gardeners. The best of these machines can handle more pedestrian odd jobs such as tearing away crabgrass and whisking away weeds far more quickly and easily than a spade or hoe or manual labor. We have wide range of Tillers from MTD & Cubcadet with option of Diesel and Petrol Engines and tilling width of 16" to 24".

Features • This tiller is excellent in operation.• It breaks up hard soil, uproot stables and leaves earth ready for seed bed.• Operates on light chised piough and performs tough job.• Heavy duty shanks for positive penetration. • It is available in three models ECUL-7R ECUL 9R & ECUL 11R  Specification • Frame     : Heavy duty 65 mm square pipes or 65 x 8 angle. • Shanks    :Heat treated (Forged) or plate Cutting (Profile).• Spacing   : Variable and 9" standard.• Shovels   :Reversible 2.50 x 11" heats treated• Nut bolts :High tensile bolts & lock nuts Available :7,9,11 tines 

Designed for easy use and lasting durability, this cultivator features a wooden handle for a firm grip while you're loosening soil or aerating. The steel head has a chrome polish which resists rust and wont snap off while loosening or aerating soil, no matter how tough your soil is. In addition, the handle features a hanging string for convenient storage. 

We offer Cultivator. Nine Tyne cultivator is secondary tillage equipment most commonly used in India for field preparation. It essentially has tyne with reversible high carbon showily points at the end arranged in two rows on a sturdy steel frame. The front row has 5 tyne and the rear row has 4 tyne and it is ideally suited for 35 HP Tractors of all makes and types with cat II linkage. Depth of operation is controlled by tractor hydraulic 1. Hitching the Cultivator to Tractor I) Attach the cultivator to the tractor by aligning the holes of the lower arm with the pins attached on either side of the cultivator and the pushing the holes of the lower arm of the tractor into the pins of the cultivator. Lock the free end of the pins with lynch pins. II) Align the adjustable screw top link the tractor with the holes on the upper edge of the three point linkage of the cultivator by placing the top link in between the two flats of the three point linkage of the cultivator and the lock the same by means of the pin provided with the top link and lock the free end of the pin with lynch pin III) Tighten the top link to the extent that the three point linkage of the cultivator is perpendicular to the ground for normal operation 2. Angle of Penetration The angle of penetration pitch of shovel points can be varied very easily by adjusting the top link. Tightening the top link increases the angle of penetration resulting in deeper penetration while loosening the top link has reverse effect Specification: Frame: 75 x 40 mm Spring: 10 mm WD, 50 mm OD and 27 coils Tyne: 50 x 19 mm forged Pairs: 50 x 8 mm flat Anchor Pin: 25 mm Nuts: Nylock Frame Bolt: 12 x 32 mm HT Tyne Bolt: 16 x 90 mm HF Linkage: 3 Point 50 x 12 mm Shovels: 8 mm Tiller Pin: 28 mm (Push Tight) Weight: 380 kg (Approx)

Cultivator Tines, Crop Thrasher

Agricultural Cultivator, Agricultural Hardware Tools, Iron Rack, Ploug

Farm Cultivators, Disc Plough, Disk Harrow, Hydraulic Reversible Ploug

Agricultural Cultivators, Metallurgy Machiner

Cultivators, Flat Beading Hoes, Garden Hoes, Lawn Mowers, Pruning Saw

Cultivating Tools, Peanut Sheller Machine, Stone Splitting Machin

Cultivator, Trenching Shovel, Garden Hoes, Pickaxes, Pick Mattock

Subsoiler, Mb Plough, Sub Soilers, Disc Ploughs, Power Harrow

Kisan Mitra Power Weeder Cultivato

Cultivator, Tractor, Agricultural Equipments, Planter, Cultipacke

Agricultural Cultivators, Green House Ne

Cultivator, Capsule Sorter Machine, Capsule Polishing Machin

Cultivator, Agriculture Pumps Spare, Automobile Engine Parts, Cable Tray

Cultivators, Bath Towels, Beach Towels, Seed Grader Machin

Cultivators, Claw Bar

Cultivator, Farming Tools, Harrow, Paddy Weeder, Paddy Winnowing Fa