Face Shield Dealers in Sakinaka, Mumbai

Tubular and continuous lengths of Co-NETIC® AA Cable Shield are made from 36AWG Co-NETIC® AA high permeability wire. Three stock diameters are available. Co-NETIC® AA Cable Shield provides a flexible, continuously enclosed shielding barrier with distinct advantages over foil wrapping or rigid channeling, and is used to avoid pickup of unwanted external H-fields (D.C. to 100 kHz), or to mitigate radiation from cable and conductors. Braid is tightly weaved, so shield coverage is 90% at nominal linear state. Co-NETIC® AA Cable Shield complies with A-A-59569 (QQ-B-575). Wire meets military specification MIL-N-14411, Comp 1.

Welding helmets are headgear used when performing certain types of welding to protect the eyes, face and neck from flash burn, ultraviolet light, sparks, infrared light, and heat. Most commonly used with arc welding processes such as shielded metal arc welding, gas tungsten arc welding, and gas metal arc welding. Welding helmets are necessary to prevent arc eye, a painful condition where the cornea is inflamed. Welding helmets can also prevent retina burns, which can lead to a loss of vision. Both conditions are caused by unprotected exposure to the highly-concentrated ultraviolet and infrared rays emitted by the welding arc. Ultraviolet emissions from the welding arc can also damage uncovered skin, causing a sunburn-like condition in a relatively short period of welding. Most welding helmets include a window covered with a filter called a lens shade, through which the welder can see to work. In most helmets, the window may be made of tinted glass, tinted plastic, or a variable-density filter made from a pair of polarized lenses.

• Copper Shield –: Unlaminated
• Copper Shield –: Laminated with high strength super lamination for extra moisture and water protectio

COPPERSHIELD Description Copper Shield is specialty grade VCI paper meant for Copper Products, Brass, Bronze and items containing Zinc Plating, Silver, Nickel, Chrome, Aluminum or other platings. Copper Shield protects the product due to the vapour corrosion inhibitng chemicals present within the micropores of the paper which evaporate and forma  multimolecular protective film which hinders and negates the effect of moisture and other harmful gases that may cause tarnishing or corrosion. Copper Shield is a high end product available for specialized applications to protect copper sheets, copper tubes, brass artifacts, copper coated mig wire and bead wire, electrical copper strips, engine bearings that may contain copper, tin and aluminum, engine bushes, sopper strips for electrical applications as well as other multimetal plated articles. The product is available upto 1 meter sheets and can be supplied in strips on rolls and cut sheets. The two available grades are      Advantages Effective dry protection Made from Imported Ingredients Australian Technology Specially developed for Cu & Alloys Protects Multimetal systems Safe to use REACH approved ROHS compliant Application Wrap the articles to be protected with the paper. Use atleas 1:3 ratio of paper to the surface area of the component. Use laminated where high moisture protection and longer storage periods are required Face non-printed side to metal Always wear gloves while using the product to prevent acidic finger sweat marks on the component.. Safety Information RUST-X oils donot contain Lead (Pb), Mercury (Hg), Cadmium (Cd), Hexavalent Chromium (Cr6), Polybrominated biphenyls (PBB), or Polybrominated di-phenylether complying with the re-stricted substances  listed in Article 4(1) of the RoHS Directive. RUST-X Products are also REACH Compliant for exports to the European Union.  

Anti dust shielding ( ads) is a separate hydrophobic treatment given to clean solar panels to ensure solar panels resist build up of dust, dirt due to bird dropping, sand abrasion, carbon particles etc easy to clean self-cleaning effect as water rolls of the surface. Such panels can be cleaned with simple water splash. The frequency of followup cleaning is reduced by half compare not ads treated solar panels. Ads treatment is more useful at the sites where environment is dustier especially chemical dust created in chemical industry salient features 1. Uv-stable, resistant to abrasion, stable at varying temperatures 2. Simple application; cures at atmospheric temperature 3. Biologically safe and ecologically beneficial 4. Effective in salty environments 5. Reduced panel cleaning cycles 6. Improved power output 7. 1 2 years guarantee

Polyplast PTFE cloth spray shields are manufactured from single and multi layered clear cloth for ease of visibility, or from a colored cloth with a leak indicating patch. Weep holes located behind the senstitive pH indicating patch allow the indicator to immediately signal a leak and will change color to red in the presence of an acid, or green if an alkali, The pH patch is also replaceable which allows reuse of the shield.Poly Plast Spray shields are UV stabilized and resistant to sun, rain and fumes and may be used indoors or outdoors. Our shields are quickly and reasily installed by one person without any tools by means of hook and loop fastener and drawstrings. Spray Shields help meet regulator standards set by agencies such as OSHA, EPA, MSHA, SOLAS, ARS & DNV, and are also required by some insurance companies. Details of PTFE spray shields • PTFE coated glass cloth • PTFE thread and drawstring • Maximum operating temperature 200 Deg. C • Fire and tear resistant • Available in : premium, standard, single-ply, clear PTFE and PTFE white • Standard color is brown • Broad spectrum of chemical resistance • Available as per ANSI, DIN, BS WHY SPRAY SHIELDS ? 1) Spray shields help in preventing damages or injuries caused from leakage of Flanges in pipes containing hazardous chemicals. 2) Spray Shield help in reaching zero accidents & improves safety. 3) Spray Shields are required for site cleanliness, pollution prevention & protection of equipment & people nearby. WHERE TO INSTALL? 1) Pipelines containing acid/alkali close to human contact or under severe temperature & pressure conditions. 2) Leakage of fuel & oil which have fire and explosion hazard.

• Color: Brown
• Material: Wood
• Type: Shield
• Features: smooth attractive finish which provides for classic looks

fabricated shields for your prototyping and sampling requirements. We make highly effective shields using various grades of Ni-Fe alloys & composite materials and anneal them in pure hydrogen atmosphere for excellent performance. Our engineers will suggest the design, material grades and thickness that best suits your shielding needs. Just write us an email explaining your Magnetic/EMI shielding problem and we will come up with best solutions to Processes used for fabrication Forming Wire cutting Laser cutting Rolling CNC machining Water jet cutting Spinning Finishing processes Tig & Argon welding Vibro finishing & deburring Sand blasting Polishing Grinding Electroplating Electro-phoretic coating Materials used 48%, 80% Ni-Fe, Mu metal Silicon Steel Copper Aluminium Mild Steel

• Certification: C E certified
• Disposability: Disposable
• Material: Acrylic

• Material: Fibre, Polycarbonate
• Application: Laboratories
• Weight: 200-400Gm
• Feature: Clear View, Durable
• Ratchet Head Band: Adjustable Swivel

Light weight and provides excellent safely.It is shatter/ splinter proof having outstanding mechanical strength.99% Transparency UV stabilized, and with approx shelf life of 15-20 years.Foam padding is provided for added protection and comfort on forearm, elbow and hand Excellent protection against brick batting, stone pelting, iron rod, knife, petrol bombs, cane attacks, as faced by police man during riot-protection and mob situation.   

• Feature: Minimizes Wind Noise.
• Warranty: 1-year manufacturer's warranty
• Weight: 15g
• Brand & Model: Rode DeadCat GO
• Dimensions: 180mmH x 70mmW x 70mmD

The Series RHRS Radiation Shield protects outside air humidity transmitters from rain and radiated heat. With the curved shape and color of the plates, air flow is able to move across the sensor to keep radiated temperatures from rooftops and surrounding surfaces from affecting humidity readings. For ease of installation, the Series RHRS has integral pipe mounting hardware which can be removed for surface mounting applications. The brackets on the Series RHRS are specifically designed to be installed on the Dwyer Series RHP outside air humidity transmitters with sintered filters. The pipe mounting bracket fits 34" to 1-12" iron pipe.

welding shields, face, fiber glass face shield, Safety Spectacles

emi shield, encoder disc, metal components

Plastic Eye Shield, surgical disposables products, Surgical Cap

Bearings and Bearing Components, Bearing Cages, Bearings

automatic hand sanitizer dispenser, Auto Touchless Soap Dispenser

Surgical Face Shield, Covid Protection Kit

shields, Trophies, trophy plaques, Wooden Trophies, Crystal Trophies

Shield, Laser Engraving, Badges, Cup, Mobile Covers

clear shields, Buses, car graphic, car window, pillar trim, Tractor

adults face shield, COPPER WATER BOTTLE SET

Outside Air Humidity Radiation Shield, Thyristors, signal conditioner

shields, sport trophy, award badges

Bearings and Bearing Components, Electrical Components, Polycab Cables

Shield, Cosmetic Product, Fashion Cap, Pen Set