Flange Nut Dealers in Madanpura, Mumbai

• Material: Steel Fastener, Hastelloy, Monel, Nickel, Duplex, Super Duplex, Titanium, Brass.
• Grade: A2-70 , A4-70
• Color: Gray
• Metric Standard: DIN 6921
• Size in Metric: M5
• Metric Size in Length: 12 MM TO 100 MM
• Manufacturing: Cold Forming
• Feature: Rust Proof

stainless steel flange nut Stainless Steel Fittings Manufacturers in Nigeria, Saudi Arabia, India. At UNIFIT METALLOYS INC, is a important emphasis is laid on certifying of service delivery and quality. With the objective of providing the best quality products to our clienteles and partners, all our products undergo rigorous testing and quality check processes.

• Size: Multisizes
• Type: Nuts
• Material: Alumunium, Bronze, Carbon Steel
• Diameter: 1-5mm, 10-15mm, 15-20mm
• Certification: CE Certified
• Length: 1-10mm, 10-20mm, 20-30mm, 30-40mm
• Color: Silver
• Application: Corrosion Resistant, Fastener, Machine, Resembling Roofing, Watertight Joints
• Surface Treatment: Dacromet, Hot Dip Galvanizing, Phosphated
• Surface: Black Oxide, Polished
• Thread: Coarse, Full Thread

• MATRIAL: STAINLESS STEEL 304,304L, 316, 316L, 316TI, 317L,309,310,904L, MONAL K-400, MONAL K-500, INCONAL -600, INCONAL-800,ALLY -625, ALLOY-825, SUS-630, UB-6,B8,B7,TITANIUM, HAST-ALLOY, ALLOY-20

    DIN 193 Flange Nuts Specifications  

• Packaging Type: Carton Box
• Specialities: High Quality, Accuracy Durable
• Material: SS, CS & Alloy
• Color: Metallic
• Size: M3-M56

Some of the attributes of our Flange Nuts are sturdy construction and dimensional accuracy. We are one of the prominent Exporters and Suppliers of Flange Nuts. With the support of our vast distribution network, we are able to deliver retail as well as bulk orders for Flange Nuts within the shortest time frame. Obtain from us, these nuts at the most reasonable prices. Size in DIA : Metric M3 to M16 Manufacturing By Cold forming

• Grade: DIN
• Place of Origin: Maharashtra, India
• Packaging Details: Export Quality Packaging As per buyer specification
• Lead Time: As per the Order
• Brand Name: CAI

• Grade: ISO
• Port: NAHVA SHEVA PORT
• Packaging Details: STANDARD PACKING
• Place of Origin: Maharashtra, India
• Supply Ability: 520000 Piece/Pieces per Week

We are the main supplier of this product.

We are offering flange nut. Material : stainless steel grade : a2, a4, 200 series standard : metric-din 6923 size in dia : metric-m3 ~ m24 manufacturing by : cold forming

Flange lock nuts are one piece, all-metal prevailing torque hex flange nuts. Being all-metal, they do not have the temperature and chemical limitations of non-metallic (such as nylon) insert type lock nuts. The protruding circular flange increases the nut's bearing surface allowing them to be used with irregular and oversized holes. Commercial and industrial applications include lawn and garden equipment and truck manufacturing. Flange lock nuts are also called: flange style automation lock nut, prevailing torque flange nuts, deformed thread flange lock nuts. They are often used with 150 ksi hex flange bolts. Lock washers are not used with prevailing torque lock nuts. By definition, "Prevailing-torque locking fasteners have a self-contained feature which creates frictional interference between the threads of the mating components." Consequently, unlike free spinning lock nuts, there is a resistance to rotation during both assembly and disassembly requiring them to be wrenched; that resistance is called prevailing torque. The advantage is that disassembly is unlikely even if preload diminishes completely because of the remaining rotational resistance. Despite the fact they are called "lock nuts," flange lock nuts are not permanently locked in place so they can be adjusted or removed after installation. However, their "locking" feature does resist loosening without the nuts being seated, which allows them to be used as stop nuts or spacers for rotating or other components. Threads are standard right-hand and Unified inch coarse series (UNC, Unified National Coarse) or Unified inch fine (UNF, Unified National Fine). Flange lock nut size refers to its nominal thread diameter. Typically, sizes range from about 1/4" to 1". Size is specified in inches, usually fractional rather than decimal. Nut width and thickness vary with the size of the flange lock nut. Flange lock nuts need to be fully engaged with the bolt/screw threads for the locking feature to be effective. To ensure full thread engagement, bolts/screws should be long enough to allow at least two full threads to extend beyond the nut face after tightening. Conversely, there should be two full threads exposed on the head side of the nut to make sure the nut can be properly tightened. Grade G is common as are phosphate & oil and yellow zinc plated finishes. Some nuts are available from domestic (USA) manufacturers. Flange lock nuts are reusable but only for a limited number of times because the prevailing torque declines each time the nut is used. Always follow the manufacturer's recommendations regarding nut reuse, thread lubricants and torque values. Do not apply standard torque values to prevailing torque lock nuts because the joint may not be tightened to the correct clamping force due to the additional friction of the locking element. It is possible that the locking feature, which consists of deformed threads, may damage the threads of the nut or bolt. The possibility is reduced when the strength grades of the nut and bolt are compatible. For example, Grade G nuts are suggested for use with bolts having a specified minimum ultimate tensile strength of not less than 120, nor greater than 150 ksi. The chance of damage is greatest if the hardness of the mating fastener is vastly different; for example, using a non-heat treated low carbon steel bolt or screw with a heat treated nut. Prevailing torque lock nuts are not considered suitable for long threaded assemblies because extended nut travel along the threads could damage the nut's locking feature. Therefore, the length of the bolt or screw should not be much longer than that needed to ensure full thread engagement with the nut. Serrated Flange Nuts Serrated Flange NutSerrated flange nuts are hex flange nuts with a serrated bearing surface. The nut turns freely until the serrations contact and displace material on the mating surface as the nut is tightened; less torque is needed to install than remove because the gripping action of the serrations create a ratchet-type locking feature that is resistant to vibration. If the mating surface is painted or plated, corrosion can occur if the nut's wiping action removes the surface treatment. The protruding circular flange increases the bearing surface of the nut allowing it to be used with irregular and oversized holes. Used in commercial and industrial applications, serrated flange nuts are also called: serrated face lock nuts, serrated tooth nuts, spin lock nuts, whiz lock nuts. Because the serrations must contact the mating surface to "lock", serrated flange nuts are not used with flat or lock washers. Threads are standard right-hand and Unified inch coarse series (UNC, Unified National Coarse) or Unified inch fine (UNF, Unified National Fine). Serrated flange nut size refers to its nominal thread diameter. Typically, sizes range from about #6 to 5/8". Sizes less than 1/4" are listed as a number size (the larger the number the larger the size) while sizes that are 1/4" and larger are specified in inches, usually fractional rather than decimal. Nut width and thickness vary with the size of the serrated flange nut. Steel, zinc plated, is a common material and finish; stainless steel is also available. Serrated flange nuts are reusable. However, always follow the manufacturer's recommendations regarding nut reuse, thread lubricants and torque values. Flange Lock Nuts Dimensions Physical Properties of Grade G Nuts (strength equivalent to Grade 8 nuts) Material: Medium Carbon Steel, Heat TreatedProof Load Strength: 150,000 psi minRockwell Hardness: Dia 1/4 to 5/8 – Rc 24/32Dia 3/4 to 1" – Rc 26/34

• Type: Stainless Steel Flange Nut
• Material: Stainless Steel
• Length: 1-10mm, 10-20mm, 20-30mm, 30-40mm, 40-50mm
• Application: Corrosion Resistant, Fastener, Machine, Resembling Roofing, Watertight Joints, Wind Power Equipment
• Color: Black, Brown, Grey, Light Cream, Silver
• Thread: Coarse, Full Thread, High Resistance

We are the main supplier of this product.

• Particulars: Size/Range/Dia
• Hexagonal Nuts: M6 TO 64MM
• Hexagonal High Strength: M6 TO 64MM
• Structural Steel Nuts: M6 TO 64MM
• Slotted & Castle Nuts: M6 TO 64MM
• Slotted & Castle Nuts (thin): M6 TO 64MM

Owing to the support of our diligent team members, our company has been able to manufacture and supply a wide range of Flange Nut. These nuts find their applications in manufacturing industries, automobile industries and many other industries. Our range is designed with utmost precision in complete compliance with the industrial standards. These nuts are priced feasible without searching grounds in terms of quality. Features: Lightweight Dimensionally accurate High finishing standards

• Material: Steel
• Packaging Type: Box
• Shape: Round
• Usage/Application: Industry
• Finishing: Polished

ASMEANSI B 16.5:Welding Neck Flange, Slip on Flange, Blind Flange, High Hub Blind Flange, Socket Weld Flange, Lap Joint Flange, Threaded Flange, Ring Type Joint Flange. BS 4504 SEC 3.1:Welding Neck Flange, Hubbed Slip on Flange, Hubbed Threaded Flange, Lapped Pipe End Flange, Plate Flange, Loose Plate Flange, Loose Plate With Weld Neck Flange, Blank Flange. BS 4504[PART 1]:Welding Neck Flange, Hubbed Slip-On Hubbed Threaded, Plate Flange, Loose Plate With Weld On Plate Collar, Blank Flange.

• Material: Stainless Steel, High Tensile, Nickel Alloy
• Flange nuts serrated Size: M02 to M33

Flange nuts serrated, available in a variety or grades, materials, and finishes, in metric and inch sizes. We are a family owned, full line fastener distributor specializing in fastener products for companies involved in Equipment Manufacturing,

• M4 to M16: 6mm-500mm
• Right Hand: 5/8"-11
• 1-1/16": DIN934 DIN936 DIN439 DIN555 A194 2H ASTM A563 JIS B1190, DIN 6923
• 4, 8, 10, AISI 2, AISI 5, AISI 8: Wind tower, Nuclear power, Railway, Automotive industry, Construction, Electronic industry
• 18-8 Stainless Steel, Stainless steel 201, stainless steel ss 304/ SS316 A2/A4, SS201, SS303, SS304, SS316, SS316L, SS904L, A2-70; A4-70; A4-80: ASME B1.1, UNC & UNF, Class 2A (Fastenal will inspect and accept parts with a 1A no-go gauge)
• Wire Drawing, Cold Heading, Insert tapping, Heat Treatment, Surface Plating, Inspection, Packing: Black Oxide, Cadmium, Galvanized, Teflon, Xylan, Zinc, Others Upon Request

Plain Washers, Industrial Angles, Bolts & Screws, heavy hex head bolts

Custom Metal Products, hexagonal bolt, Alloy 20 Fittings

Syphon Tubes, SS 904L Tube, Stainless Steel Duplex Pipes, Plain Washers

SS Eye Bolts, SS Hexagonal Head Bolts, SS Anchor Bolts, Stud Rods

Hexagon Head Screws, hexagonal screw, Hexagon Socket Head Cap Screw

Abrasion Resistant Steel Plate, Carbon Steel Seamless Pipe, Steel Coil

Plates / coils, Seamless Ss Pipes, titanium washers, Aluminium Plate 6063