Hemetek Techno Instruments Pvt. Ltd Goregaon, Mumbai, Maharashtra

The Eagle Bulk 415 PRO maximizes contaminant removal while cutting product waste and reducing downtime to boost line efficiency for dry bulk product applications such as nuts, grains, granola, sugar, cereals, coffee and other high-volume bulk products.

The Delta TLT is a stand alone device to test the yield strength of glass bottles and containers. Combining an easy to use touchscreen coupled to the latest servo motor control the Delta can deliver up to 25kN of force. Results can be viewed on screen or downloaded to a PC. Complies with ISO 8113-2004. Top Load testing for glass bottles

The Vertical Fluter is designed to simulate the corrugating of a medium. Its compact, vertical design minimizes benchspace. APPLICATIONS Corrugated medium SPECIFICATIONS Temperature: adjustable to 180° C (350° F)* Force of rolls: 100±10 N (22.5 ±2.5 lbs) Meets TAPPI T 809, T 824 Meets SCAN P42, ISO 7263 CE Mark* Set to test standard FEATURES Vertical design simplifies sample feeding Heater built into fluter roll for a faster and more uniform temperature distribution Dual digital temperature controllers monitor heat to rollers to assure accurate temperature control of each roller Drive bearings isolated from heat for longer life Easy access to fluter rolls for inspection andcalibration Space Saver design minimizes bench space Models available for A, B or C flute STANDARDS Flat Crush of Corrugating Medium (CMT Test), Test Method T 809 om-06 Fluted Edge Crush of Corrugating Medium, Test Method T 824 om-02 Paper and board - CCT value and CCT index - Corrugated crush test SCAN P 42 Corrugating medium - Determination of the flat crush resistance after laboratory fluting (EN ISO 7263) CONNECTIONS Electrical: Specify voltage requirements when ordering

Height : 460 mm (18.1 in.)

Availability : 60 kg (132 lbs.)

TS-4V Medical Heat Sealer with validatable operation to meet ISO 11607-2. This standard covers packaging for terminally sterilized medical devices with Part 2 specifying validation requirements for forming, sealing and assembly processes. This sealer comes in two models: TS-4V Standard and TS-4V-ISJ with Interchangeable Seal Jaws. The TS-4V is a precision heat sealer designed to produce accurate heat seals for peel strength measurement & testing of flexible packaging films, film foil laminates, non-woven materials and other substrates. The TS-4V also provides the capabilities of process validation.The TS-4V produces accurate and consistent seals utilizing a precision load cell system which measures and displays the total force applied to the film sample. An integrated Digital Electronic Controller displays the sealing force. Load tare functionality and dual selectable timer activation set points are also standard.The TS-4V process validation capabilities include Upper Temperature Validation Port, Lower Temperature Validation Port, Seal Dwell Timing Validation Port and Seal Cylinder Pressure Validation Port & Digital Pressure Gauge. These ports allow for meeting ISO and other standards that require the heat sealing process to be validated. External, certified and calibrated, instruments can be connected to the TS-4V to carry out the process validation.FEATURES: Digitally Controlled Temperature Digitally Controlled Seal Dwell Time Digital Seal Pressure Output Display Independent Upper and Lower Sealing Temperatures Switch Selectable Dual Pressure Set Points for Timer Initiation (1) Upper Temperature Validation Port (1) Lower Temperature Validation Port (1) Seal Cylinder Pressure Validation Port w/ Digital Pressure Gauge (1) Seal Dwell Timing Validation Port Footswitch Operation Safety Guards and Switches for Safe Operation Maintenance Hardware Kit   ASTM F2029 Standard Practices for Making Heatseals for the Determination of Heatsealability of Flexible Webs as Measured by Seal Strength Meets ISO 11607-2 Packaging for sterilized medical devices with validation

For high force applications in the range 100 kN to 150 kN (22481 lbf - 33722 lbf), Lloyd Instruments provide a range of robust, heavy duty test machines. All systems are floor standing, apart from the bench-mounted LS100Plus 100 kN (22481 lbf) machine, and feature a large working area. Simple to set up, operate and maintain, all machines display high accuracy load measurement and rapid data acquisition. Full PC integration with Lloyd Instruments' advanced NEXYGENPlus material test and data analysis software. Metal, Wire & high force application

For applications in the mid force range, Lloyd Instruments offers a wide range of testing machines and accessories for forces up to 50 kN. Flexible, simple to use and maintain, they provide high accuracy load measurement and are capable of a rapid 8 kHz data acquisition rate. The stand alone system can store up to 600 test results from 10 programmable test set-ups or, with PC integration with Lloyd Instruments powerful NEXYGENPlus material test and data analysis software, can perform advanced data analysis.Available models are: 5kN, 10kN, 20kN, 30kN & 50kN. Ideal for routine quality control testing or complex multi-stage tests, all machines can perform tensile, compression, flexural, peel, shear, friction tests and many more.    

The Chatillon® DFS II Series with remote STS carries all of the features of the DFS II in a package that provides the user with the ability to perform torque measurements. The DFS II-R-ND allows the user to change STS sensors adding the flexibility of having one base indicator and several load cells to meet different testing needs. The head unit can also be used with SLC load cells providing one unit to perform all force and torque testing. The Chatillon® DFS II Series offers the best price performance of any digital force gauge available today. Our brand new DFS II Series of Digital Force Gauges is the first of their type to offer wireless data transfer and communication via integral Bluetooth.  This compact, easy-to-use force gauge is designed for basic and complex applications. Ideal for handheld or test stand applications, the DFS II may be equipped with integral load cells or smart remote sensors for load measurement or torque measurement. Measurement accuracy is better than 0.1% full scale in integral load cell or dedicated remote model. Use a Non-Dedicated Torque Sensor to expand the applications that can be performed by a single DFS II digital force gauge unit. Use a DFS II with a remote STS torque sensor to check product packaging security and the ability of a consumer to open the package. The remote torque sensor design is useful in allowing for a technician to easily move around a product and perform multiple checks on fasteners.

The performance of a container in production and transit is critical to the manufacturer. Product failures during filling, packing, warehousing and shipping are costly and can easily be prevented when containers and finished goods are tested for Top-load strength. Top-load strength is an excellent method to optimize the necessary force required to produce deformation and failure of bottles and containers. Top load strength can also identify thinned areas in the wall of the bottle resulting in poor wall-thickness distribution. Model 17-77 Compression Tester meets International Standards and Corporate testing methods for compression strength requirements for a variety of materials and products. A new enhanced microprocessor design with servo motor provides precision force and position control for repeatable instrument performance.

The performance of a container in production and transit is critical to the manufacturer. Product failures during filling, packing, warehousing and shipping are costly and can easily be prevented when containers and finished goods are tested for Top-load strength. Top-load strength is an excellent method to optimize the necessary force required to produce deformation and failure of bottles and containers. Top load strength can also identify thinned areas in the wall of the bottle resulting in poor wall-thickness distribution. Model 17-77 Compression Tester meets International Standards and Corporate testing methods for compression strength requirements for a variety of materials and products. A new enhanced microprocessor design with servo motor provides precision force and position control for repeatable instrument performance. APPLICATIONS Beverage, Cosmetics, Pharmaceuticals, Blow molded containers for beverage, and household use PET bottles, Tubes and Cores, Corrugated Boxes Stacking strength of cases STANDARDS ASTM D 2659 Column Crush Properties of Blown Thermoplastic Containers DIN 55440-1:99 Packaging test; compression test OPTIONS Opening Size: 16, 20 and 24 inch FEATURES Maximum Capacity 2000 LB (8896 N) Selection of load cell ranges to Maximum Capacity Platen size 13 x 13 in (330 x 330 mm) Adjustable pre-load before start of measurement Variable pre-test speed to pre-load Variable test speed Auto return to pre-set start distance Automatic fast return platen saves testing time Pre-set keys for storing up to 6 test methods Multi-language programmed- 7 languages English - Dutch - German - French - Spanish - Finnish – Italian(special languages on request) Measuring units include: N, N/m², lb, lb/in², kg, or kg/m² RS232C serial data output Built-in Printer SPECIFICATIONS Measuring range: 0 – 2000 lb (0- 8896 Newton) Load Cells: 0-1000 lb., 0-2000 lb. (2225 N, 4450 N, 8896 N) Accuracy: ± .5 % of reading Stroke length: 16 in (406 mm) or 24 in (609 mm) Measuring units: N, N/m², lb, lb/in², kg or kg/m² Test Speed: 0.02 - 20 in/min (0.508 -508 mm/min) Return Speed: 10 in/min (254 mm/min) Upper platen size: 13 x 13 in (330 x 330 mm) with 16 in (406 mm) opening Lower platen size: 13 x 13 in (330 x 330 mm) Statistics display: Number of tests, Highest value, Lowest value, Average, Standard deviation, Variation coefficient, Max. number of tests : 100 (in one test series) CONNECTIONS Power: 120V/220Volt, 50Hz/60HzRS232C output, Built-in Printer SAFETY FEATURES Overload protection based on load cell in use

Availability : 345 lb. (157 kg)

Lloyd Instruments test machines can be used with a range of thermal cabinets and furnaces.  The following models are available: Heating cabinets (40°C to 300°C) Heating and cooling thermal cabinets (-70°C to 300°C) High temperature split furnaces (50°C to 950°C)   Designed for testing samples under pre-defined temperature conditions.    

The TA1 texture analyser is an easy to use, cost effective solution to evaluate the textural properties (compression, shear, extrusion, puncture, hardness forces etc) of a wide range of products at all stages of manufacture. It can perform rapid, detailed texture profile analysis (TPA) for applications up to 102 kgf (1 kN, 225 lbf).Parameters: Gumminess,  Adhesiveness, Fracture, Chewiness work Stickiness, Springiness, Gel strength, Stringiness, Firmness, Cohesiveness,  Toughness, Hardness Elasticity,  Texture profile analysis (tpa) Broad Range of Applications Bakery Cereals Confectionary & Snacks Dairy Fruit & Vegetables Gels Meat, Poultry & Fish Pasta & Rice; Snacks Pet Food Cosmetics Packaging

The FP product line includes a complete range of thermocouple assemblies and resistance thermometers, measuring inserts, thermo-couples of precious as well as base material, thermocouple wire, extension wire, temperature transmitters and portable digital thermometers. Complete range of thermocouple assemblies and resistance thermometers Thermocouples of precious as well as base material Standard and custom designed temperature sensors of high quality for all kind of solutions and applications Standard products are fully documented and for customer specified sensors, we make product specifications, detailed construction and customer drawings

The DTI-1000 can be used with a JOFRA STS Superior Temperature Standard probes as the working temperature reference in nearly any calibration application, or it can be set up directly in custody transfer applications where high accuracy (low uncertainty) is important.Features for the DTI-1000 High accuracy 0.005°C (0.009°F) Resolution 0.1 - 0.01 or 0.001 True-Ohm measuring principle Dual channel inputs A and B, with differential  value A-B, peak hold, etc. Range -200°C to 750°C (-328°F to 1,382°F) Battery or mains adapter supply RS232 interfase as standard Calibration PC software included The JOFRA DTI-1000 digital temperature indicator is a fully traceable thermometer recommended as the reference instrument to verify the true temperature of any type of temperature calibrator, liquid bath or dry-block calibrator

Portable precision thermometers. Dry-block and liquid bath temperature calibrators: 5 series, with more than 25 models and temperature ranges from -90° to 1205°C / -130° to 2200°F. All featuring portability, accuracy and speed.   Highly portable and fast precision thermometers Wide range of dry-block and liquid bath temperature calibrators Temperatures ranging from -90 to 1205°C / -130 to 2200°F Applications from cryogenics in super freezers to extreme metal hardening heat all featuring speed, portability, accuracy and advanced documenting functions with JOFRACAL calibration software

The tear test, also known as the Elmendorf Test, measures the internal resistance to tearing. The Monitor/Tear features a digital display and interchangeable pendulums to measure forces up to 6.4N or an optional fast-change universal pendulum.Tear testing determines the force required to continue the tearing of an initial cut in sheet materials. This is also used to evaluate strength of perforated materials such as postal reply cards. The Monitor/Tear™ is an automated tear tester equipped with an optical encoder, measuring the angular position of the pendulum during the tearing operation, and converting this measurement to tear units. Paper, Foil, Film, Textiles, Nonwovens Conforms to TAPPI T-414, ASTM D1922 and D1424, ISO 1974, CPPA D.9, AS/NZ 1301.400S, BS 4468, and SCAN P-11.

Taber abrading wheels produce characteristic rub wear action Mounted to a rotating turntable, specimens are subjected to the rub-wear action of two abrasive wheels. Driven by the test sample, the wheels produce abrasion marks that form a pattern of crossed arcs over a circular ring approximately 30 square centimeters. This reveals abrasion resistance at all angles relative to the weave or grain of the material. Test wear and durability of ceramics, plastics, textiles, flooring, paper, metals and coated surfaces & wide range of products. Single and dual sample table models.

The TABER® V-5 Stiffness Tester - Model 150-B or 150-E is used to evaluate stiffness and resiliency properties of materials up to 10,000 Taber Stiffness Units.  This precision instrument provides accurate test measurement to ±1.0% for specimens 0.004" to 0.219" thickness.  Materials include paper products, cardboard, plastics, metals, textiles, rubber, wire, tubing, felts and other sheet materials.   Stiffness Tester is used to evaluate stiffness and resiliency properties of materials up to 10,000 Taber Stiffness Units.  Materials include paper products, cardboard, plastics, metals, textiles, rubber, wire, tubing, felts and other sheet materials.

The Smith Roll Tightness Tester determines roll winding uniformity to eliminate roll bursting and press breakdown from poorly wound rolls. Paper Rolls not wound with uniform tension can cause a variety of problems. Large diameter rolls that are extremely tight on the outside tend to burst during handling and shipping. Uneven roll tightness often results in starring- the warping of the winding core. On highspeed web presses, the warped core causes uneven feed and paper jerking and can cause the breakdown of the press. FEATURES Portable Easy to use Handheld teste

Process signal measurement and simulation for easy control loop calibration and measurement tasks - from handheld field instruments to laboratory reference level bench top instruments.   Process signal measurement and simulation Easy control loop calibration and measurement task Handheld field instruments Laboratory reference level instruments

INTRODUCTION The Short Span Compression Tester is an advanced microprocessor-controlled instrument for determining the compression strength of fluting medium or test liner, and offers unrivalled repeatability and reproducibility. Considerable cost savings are possible through accurate prediction of corrugated component performance. APPLICATIONS Paperboard, Paper, Liner, Medium, Paper/Film/FoilLaminations SPECIFICATIONS Load cell range: 0-500N Clamp length: 1.2 in (30 mm) Free span: 0.03 in (0.70 mm) Adjustable clamping force Load cell capacity: 100 lb (444 N) with overloadprotection Conforms to TAPPI T-826, ISO 9895, SCAN P46,AS/NZ 1301.4SO RP, BS 7325, DIN 54518 FEATURES Unique clamping mechanism Test statistics at the push of a button Selectable units kN/m, lb/inch, N Load cell with overload protection Easy to read display Traceable calibration RS232 serial data output

A removable scale beam is mounted on a pivotal shaft projecting from an adjustable gage block. An adjusting screw permits the height of the pivotal shaft to be raised or lowered, corresponding with the thickness of a test specimen up to 12.7 mm (0.5 inches). This adjustment allows the scale beam to be maintained in a level position in respect to the specimen and turntable. Designed with an integrated bearing, the scale beam can be tilted in a rest position enabling the operator to mount or remove specimens. Evaluate resistance to shearing, scratching, gouging, marring, scraping and engraving on a variety of flat, rigid specimens.  It may also be used to test the relative homogeneity of materials, the adhesive qualities of protective coatings and the effects of age on similar materials.

ScanTVS is an innovative print inspection solution that provides accurate quality control of all printed packaging and scanned components. ScanTVS is ideal for the inspection of packaging proofs, labels, cartons and nested press sheets in both printed and PDF formats.   Quick Detection of Broken text Missing or added elements Print defects   Key Features Dual scan mode: scan in master & sample simultaneously Optional booklet scanner module: easily scan in booklets and other multi-page documents Intelligent cropping Easy to use interface Pharmaceutical packaging compliance Overprint & layer handling Prepress quality control Artwork inspection Web inspection Print Inspection quality control Color measurement tool: ability to display RGB and CMYK color values Reporting & commenting Optional BarProof and BrailleProof modules to inspect barcodes & Braille

Scanner technology  State-of-the-art patent pending technology Easy to clean of all contaminants Resistant to cleaning agents and inks Front support tray  Low friction reduces chance of ink transfer to the scanner bed Helps prevents slipping of media throught the scanner feed system Foldable (low footprint) Back support tray  Low friction reduces chance of ink transfer Helps prevents slipping of media throught the scanner feed system Helps to store media Foldable (low footprint) Monitor Arm  Ergonomically designed inspection workstation mounting system Fully adjustable Foldable (low footprint) Stand assembly  Sturdy design. Media Storage tray PC mounting system On wheels for easy moving Software Integration  Full integration within Global Vision's ScanTVS™ software

Degassing carbonated beverages is an essential pre treatment for quality control analysis, it can significantly influence pH, Brix Acidity & Aspartame results. The Somex has been scientifically proven to be the most accurate repeatable and efficient method of degassing carbonated beverage samples.

Application : Beverage Industry