JK Exports Khar, Mumbai, Tamil Nadu

WATER-JEL BURN KITS Assortment of Water-Jel Burn Sterile Burn Dressings, Burn Wrap, Fire Blankets and Burn Jel. These different kits are configured for specific industries. Can be utilized for most industrial, institutional and medical emergencies.

Water-Jel burn Blanket The gel is water soluble and can be easily rinsed off for further medical treatment. The blankets can also be used to put out fires and protect a rescuer from heat and flames. Wall mounting brackets also available. Medical Device contains no active ingredients.

The 'Immediate Cooling' of burns is recommended by most EMS protocols and curriculum. WATER-JEL burn care products utilize a thick water-based gel-proven to dissipate heat and cool burns, quickly relieve pain, help stop burns from progressing deeper into the skin and help prevent infection. WATER-JEL Dressings and Fire Blankets can be used on all burns. features Gel-soaked Fire Blankets extinguish flames on a victim put out smoldering clothes, relieve pain, cool the burn, and protect against airborne contamination. The gel is water soluble and can be easily rinsed off for further medical treatment. The blankets can also be used to put out fires and protect a rescuer from heat and flames.

This test unit has been designed to generate a wide range of optical output signals. Flame sensors for fire detection and flame monitoring applications can be activated and tested. Most optical flame sensors respond to Ultra Violet (UV) and or InfraRed (IR) radiation emitted from flames during combustion. Many sensors also use flame flicker techniques to distinguish between flames and other optical false sources. The test unit simulates the flickering flame signal by modulating the output of a filament lamp. The thermal time constant of a filament lamp prevents the generation of a perfect flame flicker signal. The slow response of the filament lamp will mean that some flame sensors many require more time to activate under test than they would with a real flame. Ideal for testing flame detectors Wide Spectral Output - UV, Visible, Near IR, Mid-IR Tests many Flame Sensors Types UV, UVIR, UVIR², IR³, IR², IR Conforms to NFPA 72 Chapter 14 (14.4.3) Portable with Rechargeable NiCd Battery Pack and Charger 12V 7 Ah maintenance free leak proof sealed battery Selectable Optical Output Type Constant Illumination Regular Flashing Sources (Range of Frequencies)

Telescopic Access Poles minimum possible whip or bend at height relative to weight and cost. This, coupled with the simple locking mechanism of the telescopic sections means that these access poles combine ease of use with design and manufacturing excellence.

Smokesabre The built in ‘Sabre’ makes the product unique compared to other smoke alarm test sprays (commonly referred to as smoke sprays, smoke cans and canned smoke). Faster detector activation and clearing, The end of harmful residue – risk is designed out with the sabre.

Smoke Detector Testing benefiting as it does, from a cup big enough for the great majority of detectors but still small enough not to be obstructive and unwieldy. Spring-loaded solution for suspended ceilings, Transparent test cup for clear view of detector LED.

Diameter : up to 177mm / 7"

SMOKE DETECTOR SENSITIVITY TESTER Reduces false alarms – a huge problem in the industry, Battery operated and easily portable, Suits most detectors – both ionization and photoelectric.

SMOKE AND HEAT DETECTOR TESTER Uses Testifire Smoke Capsules, Fully programable to carry out single, simultaneous or combined test cycles.

Long-Term Smoke Alarm Device Our devices therefore do not require annoying and expensive battery changes. This represents just one of the many ways how we actively contribute to the protection of our environment.

Heat Detector Testing in a focussed beam directly toward the sensor for optimum energy use and results. Interchangeable NiMH battery batons and a fast battery recharger enable testing all day with a cable free professional device. Universal design suits widest range of detectors.

HEAT AND CO DETECTOR TESTER Uses Testifire Smoke Capsules and Testifire CO Capsules, Fully programable to carry out single, simultaneous or combined test cycles.

Ideal for testing flame detectors,Wide Spectral Output - UV, Visible, Near IR, Mid-IR,Tests many Flame Sensors Types UV, UVIR, UVIR², IR³, IR², IR,Conforms to NFPA 72 Chapter 14 (14.4.3)Selectable Optical Output Type

This test unit has been designed to generate a wide range of optical output signals. Flame sensors for fire detection and flame monitoring applications can be activated and tested.Most optical flame sensors respond to Ultra Violet (UV) and or InfraRed (IR) radiation emitted from flames during combustion. Many sensors also use flame flicker techniques to distinguish between flames and other optical false sources.The test unit simulates the flickering flame signal by modulating the output of a filament lamp. The thermal time constant of a filament lamp prevents the generation of a perfect flame flicker signal. The slow response of the filament lamp will mean that some flame sensors many require more time to activate under test than they would with a real flame.

FLAME DETECTOR TESTER This test unit has been designed to generate a wide range of optical output signals. Flame sensors for fire detection and flame monitoring applications can be activated and tested. Most optical flame sensors respond to Ultra Violet (UV) and or InfraRed (IR) radiation emitted from flames during combustion. Many sensors also use flame flicker techniques to distinguish between flames and other optical false sources.

Emergency Oxygen Units Wall Mount for Recognition and Accessibility, always available on display for easy access, Constant Reading Supply Gauge (other units must be turned on to read gauge), Cylinder is easily disposablereplaceable or refillable at local gas distributors.

Size : 20" x 6" x 9" - 16lbs

Emergency Burn Station Assortment of Water-Jel Burn Sterile Burn Dressings, Burn Wrap, Fire Blankets and Burn Jel, Can be utilized for most industrial, institutional and medical emergencies. All Water-Jel Emergency Burn Stations are manufactured from durable, wipe clean plastics.

Detector Testing Kits are available either as separate components or as complete kits – configured both by height and application. The price of complete kits is usually less than the sum of the component parts.

Detector Removal and Cleaning are fitted on bayonet mountings and the task can be done using specialist tools fitted to appropriate access poles. Using such specialist devices saves the time, cost, disruption and risk to safety that ladders, scaffolding or access gear represents.

Head Unit only Uses Testifire Smoke Capsules and Testifire CO Capsules Fully programable to carry out single, simultaneous or combined test cycles

Detector manufacturer endorsed Genuine and non-flammable CO stimulus Controlled delivery Designed for use with Solo 330 332 dispensers

Burn Dressings and Burn Kits Gel-soaked Burn Dressings cool the burn, relieve the pain and protect against airborne contamination. Consist of a medical grade non-woven pad, in a water based, water-soluble gel, Won’t stick to burn injury. Facial dressing with pre-cut holes for eyes, nose and mouth.

Bridela Fire Blankets Product independently tested and certified to BS EN 1869, Blanket made from silicone coated woven glass fibre fabric(totally asbestos-free), Easy and quick withdrawal of blanket from container, English andor other language instruction labels available

Product independently tested and certified to BS EN 1869 Blanket made from silicone coated woven glass fibre fabric(totally asbestos-free) Containers can be wall-mounted Easy and quick withdrawal of blanket from container Competitively priced English andor other language instruction labels available Customer's own name label can be appended Clear pictorial instructions