Kanaad Electronics Pvt. Ltd. Marol, Mumbai, Maharashtra

  • VRLA Battery Charger

    VRLA Battery Charger

    Request for Price

    Compact in Size.    Constant current charging.  Charging Current selection according to Battery capacity. (2.5,5,7,9,14)  VRAL and Flooded Battry Charging    LED indication for charging    LED indication for Battery reverse.  Available in 3 combinations. (1Ch, 2Ch, 5Ch)  Attached Test lead with battery charging clips.

    ...more
    Get Best Price
  • two wheeler battery charger

    two wheeler battery charger

    Request for Price

    Input Voltage : 230Vac 50Hz(typical) 180Vac 50Hz(Min) 260Vac 50Hz(Max) Input Current : 0.1 Ampere(Max) @ typical Input voltage Charging Cutoff Voltage : 14.2V(Only for VRLA Mode) Charging Voltage : 16VDC(Max) for Flooded Mode Charging Current : 1.2Ampere(Max) @ typical Input voltage

    ...more
    Get Best Price
  • Smart Check Meter

    Smart Check Meter

    Request for Price

    This is a unique meter for checking battery voltage,vehicle charging system and vehicle battery health.      7 Segment LED display   Powder coated metal body.   Removable probes with battery clips   Self-Powered.   6V to 32V Opreating Voltage. Features: Digital dc voltmeter with 3 digit display   Vehicle battery health indicator(GOOD,WEAK,BAD).   Vehicle battery charging System indicator(High,Ok,Low).   Reverse Polarity Protection   3 month warranty.

    Weight : 400gm

    ...more
    Get Best Price
  • Production Line Tester

    Production Line Tester

    Request for Price

    Now a days End Of Line testing of a battery is very much important to find manufacturing defects inside the battery. This saves the time for and cost of transportation in case of claims against manufacturing defects. Kanaad Battery production Line Tester delivers a heavy duty performance needed for continuous or large battery production. This test is based on a HRD standard for testing of batteries. According to this standard any 12V automotive battery to perform well at normal temperature should sustain 3X load than its Ah capacity and remain above 10V for specific short duration of time. User needs to set the End voltage, Test current and the Test timing.

    ...more
    Get Best Price
  • Battery Voltmeter and Vehicle Charging System Monitor

    Battery Voltmeter and Vehicle Charging System Monitor

    Request for Price

    Now a days vehicle percentage is increased much. To keep the battery in good health condition it is necessary for vehicle charging system to work properly. Kanaad battery voltmeter is easy to use vehicle charging system monitor. It tells user whether the charging system is working properly or not with visual indications. Battery voltmeter can be used to function as regular voltmeter or as a vehicle charging system monitor using selection switch provided on front. In Charging system monitor mode it gives visual indication of battery UnderCharging and OverCharging. This system can work for both 12V and 24V systems.

    ...more
    Get Best Price
  • battery testing equipments

    battery testing equipments

    Request for Price

    Kanaad portable load testers are designed specially for on site battery testing need. It is useful for finding general battery health.Now a day usage of battery is increased so much. Battery systems are installed in a remote areas far away from cities. So to attend faults in such systems is needed that testing machine should be portable and should tell you precise condition of battery. By keeping this in mind during design we focused on portability of the tester as well as accuracy of results. It comes with a handy bag so that it is easy to carry anywhere.

    ...more
    Get Best Price
  • High Rate Discharge Battery Tester

    High Rate Discharge Battery Tester

    Request for Price

    HRD Tester is designed for High Rate Discharge testing of automotive and commercial batteries. HRD is a standard accepted worldwide and is a reliable method for instant testing of batteries. This method simulates same condition on battery as cranking the engine. Nowadays customers need a record of their battery under test, so we have given a option to take a printout of the result. HRD tester is available in different models for Motorcycle and automotive batteries.. As per standard any 12V automotive battery to perform well at normal temperature should sustain 3X load than its Ah capacity and remain above 10V for specific short duration of time. So according to this In HRD tester user should set a battery Ah capacity, machine will automatically puts a 3X load for 5 seconds and observe the battery voltage to find the battery health. For Motorcycle batteries load is 5x battery Ah capacity.

    ...more
    Get Best Price
  • battery capacity tester

    battery capacity tester

    Request for Price

    Battery capacity" is a measure of the charge stored by the battery, and is determined by the mass of active material contained in the battery. The Amp Hour (AH) specification provides a measurement of battery capacity.The battery capacity represents the maximum amount of energy that can be extracted from the battery under certain specified conditions. So how many amp-hours of capacity does your battery really have? Find out with Battery Capacity Tester. These tests are helpful for relative comparisons and battery analysis. In this method a fully charged battery is discharged with a constant current up to the voltage level below which battery is considered as fully discharged. In this test user needs to set parameters like Battery cutoff Voltage and a test current. Current setting is dependant on expected rate of discharge. At the end of test, machine gives you the reading of exact Ah capacity extracted from the battery.

    ...more
    Get Best Price
  • Automotive Battery HRD tester

    Automotive Battery HRD tester

    Request for Price

    We have marked a remarkable position in market by offering the best quality, best result and best price instant battery testing equipments Features: Digital dc voltmeter with 3 digit display   Vehicle battery health indicator(GOOD,WEAK,BAD).   Vehicle battery charging System indicator(High,Ok,Low).   Reverse Polarity Protection   3 month warranty.

    Weight : 7.5 kg

    ...more
    Get Best Price
  • All In One Pro Battery Tester

    All In One Pro Battery Tester

    Request for Price

    As the name suggest All In One Battery tester is developed for all types of battery testing needs. So this single machine can perform Instant Load test as well as backup test. Most of the battery traders deals in all types of batteries such as Motorcycle, Automotive as well as Inverter batteries. Problem with Instant tester is that they can not tell you exact backup time battery can give. So they need to purchase different tester for taking backup or they have to use traditional method of using bulb load. But these methods need continuous monitoring as well they need dedicated setup. For all these problems we have found a ALL IN ONE solution which is economic as well as do all the needed tests.

    ...more
    Get Best Price
  • Electronic Components

    Electronic Components

    Request for Price

    Get Best Price

Services

Be first to Rate

Rate This

Select the service for which you are writing review for this business

How would you rate the business?

What would you like other to know about this business, based on your experience?

Minimum 20 characters!

About the Company

  • Primary Business Retailer
  • Secondary Business Type Manufacturer / Exporters / Wholesale Suppliers

Opening Hours

  • SUN : Closed
  • MON : 9:30 AM - 6:30 PM
  • TUE : 9:30 AM - 6:30 PM
  • WED : 9:30 AM - 6:30 PM
  • THU : 9:30 AM - 6:30 PM
  • FRI : 9:30 AM - 6:30 PM
  • SAT : 9:30 AM - 6:30 PM
Kanaad Electromation solutions Pvt. Ltd. (KESPL) was established in 2011 at Sangli Maharashtra focusing on designing of various electronic test equipments required for Automobile and battery industry.
KESPL has perfect blend of experience and youth. All KESPL's products are designed and finalized after market survey, numerous field trials and customer feedbacks. As a result of this over the past few years KESPL has established its name in providing Battery Testing solutions. With its sound technical background, smart Firmware and hardware design expertise, KESPL is able to offer customized solution that can help you in making ideas happen.
Read More »

Contact Information

Kanaad Electronics Pvt. Ltd.

  • Mr. Pawan Mittal
  • 29, Apurva Indl. Estate, Makwana Road, Marol, Andheri (east),, Mumbai, Maharashtra

Find Popular Two Wheeler Battery Charger Dealers

top